[2023年12月]更新のMicrosoft PL-600試験一発合格保証！
完全版PL-600練習テスト149独特な解答と解釈が待ってます！今すぐ取得せよ！
質問 # 16
A company uses Microsoft Power Platform solutions.
The company plans to set up application lifecycle management (AIM) capabilities to store the solutions in source control, which will be used to automate the release process.
You need to set up the initial ALM infrastructure to store the solutions in source control.
Which four actions should you perform in sequence?
To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
正解：
解説：
1 - Create an Azure DevOps Project.
2 - Install the Microsoft Power Platform Build Tools.
3 - Create a Release pipeline.
4 - Add a task for Microsoft Power Platform Import Solution.
質問 # 17
You are a Microsoft Power Platform solution architect capturing requirements for a national retail chain protect. The project has the following requirements
* Retail employees must use the application on a company- prowled tablet device.
* The app must store data offline
* Environment capacity must be monitored to ensure usage stays within 80 percent of available capacity
* Apps are shared with security group teams for users to access.
You need to identify the project s functional and non-functional requirements.
How should you categorize the requirements? To answer, drag the appropriate categories to the correct requirements. Each category may be used once, more than once, or not at all You may need to drag the split bar between panes or scroll to view content.
正解：
解説：
Explanation
質問 # 18
A company uses Power Pages for article submissions. The article properties are stored in a table in Microsoft Dataverse and the content of the article is stored in a related Microsoft SharePoint library. The company invites different experts outside its organization to review an article before publishing it. The reviewers are granted access to the articles in Microsoft Dataverse. The company has the following requirements:
* Provide a app to canvas the reviewers that exposes both the article properties and content in read-only mode.
* Once the review is completed, the reviewer saves the review data, and the article and the review no longer appear in the app.
You need to recommend the components to be used for each requirement.
Which options should you use?
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation
質問 # 19
You are designing a Microsoft Power Platform solution.
You need to identify the non- functional requirements for the organization.
Which three non-functional requirements should you identify? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. customer maintenance procedures
- B. business rules to identify top customers
- C. usability of business process flows
- D. solution regulatory compliance
- E. time-to-load forms
正解：A、C、D
質問 # 20
An animal welfare organization wants to track the movement of wolf packs in a region. Cameras at specific locations capture images when motion is detected within the camera sensor range. Staff upload the images manually to a shared drive and then analyze the images.
The organization wants to automate image capture and analysis. The organization has the following requirements:
Save captured images in an appropriate location.
Analyze saved images by using an image recognition process.
Display data in real-time dashboards.
You need to recommend the correct technology for the requirements.
What should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation:
Box 1: Automated cloud flow.
Create a cloud flow when you want your automation to be triggered either automatically, instantly, or via a schedule.
Automated flows: Create an automation that is triggered by an event such as arrival of an email from a specific person, or a mention of your company in social media.
Box 2: Desktop flow and AI Builder
Desktop flows are used to automate tasks on the Web or the desktop. Using Power Automate Desktop you can automate tasks on the desktop as well as the Web.
Box 3: Model-driven app dashboard with Power BI
The Power BI cloud service works with Microsoft Dataverse apps to provide a self-service analytics solution. Power BI automatically refreshes the app's data displayed.
Reference:
https://docs.microsoft.com/en-us/power-automate/flow-types
https://docs.microsoft.com/en-us/powerapps/maker/model-driven-apps/use-power-bi
質問 # 21
You need to provide the IT specialists with design diagrams.
What should you provide?
- A. Entity relationship diagram (ERD)
- B. Business process modeler (BPM)
B Al Builder - C. Dynamics 365 Product Visualize
正解：B
解説：
Scenario: IT specialists want to design Power BI reports. They need to understand the underlying table relationships of the system.
Business process modeler (BPM) in Microsoft Dynamics Lifecycle Services (LCS) is a tool that you can use to create, view, and modify repeatable implementations that are based on business process libraries. BPM helps you align your business processes with industry-standard processes that are described by the American Productivity & Quality Center (APQC)
Reference:
https://docs.microsoft.com/en-us/dynamics365/fin-ops-core/dev-itpro/lifecycle-services/bpm-overview
質問 # 22
A company offers continuing education courses for medical professionals. Each time a course is offered, the company tracks that the session has taken place in an Excel workbook.
The company maintains a list of required qualifications for an educator to teach a course. Educator qualifications range from languages spoken to advanced degrees.
The company needs the following custom table relationships defined:
Associate educators with a list of their professional qualifications.
Assign a primary educator to each course that is held.
Collect information about every course that is held.
You need to determine the type of relationship that best fits the requirement.
Which type of table relationship should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/powerapps/maker/data-platform/create-edit-entity-relationships
質問 # 23
You are designing a solution to automate the following processes:
* Import data into Microsoft Dataverse from systems that have an API available.
* Import data into Microsoft Dataverse from systems that do not have an API available.
* Validate that contacts in a Microsoft Excel file Dataverse forms in a specified order.
You need to implement automation methods.
Which components should you use' To answer, drag the appropriate components to the correct requirements. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point
正解：
解説：
質問 # 24
A company provides mobile diagnostic imaging services. You are designing a Power Apps solution to manage patient appointments and procedures.
Patient records are stored within the company s cloud patient billing system. The patient ID must be the only information stored within the app. The patient name and date of birth must be visible to the technician to verify the patient's identity.
You need to recommend a solution to display the patient information.
What should you recommend?
- A. Custom dataflow
- B. Privacy preference
- C. Business rule
- D. Data gateway
- E. Virtual table
正解：E
解説：
A virtual table is a custom table in Microsoft Dataverse that has columns containing data from an external data source. Virtual tables appear in your app to users as regular table rows, but contain data that is sourced from an external database, such as an Azure SQL Database. Rows based on virtual tables are available in all clients including custom clients developed using the Dataverse web services.
Reference:
https://docs.microsoft.com/en-us/powerapps/maker/data-platform/create-edit-virtual-entities
質問 # 25
You are performing a requirements analysis for a customer.
The customer provides the following requirements:
Power Platform storage capacity must remain under 100 percent.
Customer service representatives must be sent an email when they are assigned a case.
Help desk technicians must be shown an error message when they try to delete a task row.
The plug-in pass rate must remain over 99 percent for the production environment.
You need determine if the requirements are functional or non-functional.
Which requirement type should you use? To answer, drag the appropriate requirement types to the correct requirements. Each requirement type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation:
Box 1: Non-functional
Non-functional requirements commonly describe non-behavior aspects of the solution such as performance requirements.
Box 2: Functional
Functional requirements describe what the solution needs to do or its behaviors.
Box 3: Functional
Box 4: Non-functional
Examples of common non-functional requirement types include:
Availability
Compliance/regulatory
Data retention/residency
Performance (response time, and so on)
Privacy
Recovery time
Security
Scalability
Reference:
https://docs.microsoft.com/en-us/learn/modules/work-with-requirements/3-functional-requirements
https://docs.microsoft.com/en-us/learn/modules/work-with-requirements/4-non-functional-requirements
質問 # 26
You need to ensure that the solution meets the data security and compliance requirements.
What should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/powerapps/maker/data-platform/data-platform-entity-lookup
Topic 3, Fabrikam, inc.
Current environment
Overview
Operations for the company are managed very informally. Only a small number of long-term employees are aware of all manufacturing processes. The company has been experiencing quality issues associated with its manufacturing operations and installations.
The company wants to implement a way to capture quality inspection results for each machine produced. Current inspection checklists are stored in the Files section of a Teams channel for inspectors. Inspectors commonly print the incorrect inspection checklist.
The company has specific inspection stations for certain inspection steps. Each station has the gauges and equipment required for related inspection steps. There is often a backlog at specific inspection stations. This results in delays in shipping machines to customers.
Accounting system
The current system does not handle shop floor or manufacturing planning functionality.
Machines are assigned serial numbers and placed in stock until they are shipped to customers.
Employee information is maintained only within the accounting system. Access to the information is strictly controlled due to privacy regulations and company policies.
Other systems
The company has an enterprise Microsoft 365 subscription. The company uses Microsoft 365 only for sending and receiving email. The company uses photos of employees to generate employee badges. Photos are uploaded into Microsoft 365 user profiles.
The company recently started using Dynamics 365 Field Service to manage and maintain the machines that it installs for its customers. The app has not been customized.
The company has added roles, skills, and certification proficiencies to Dynamics 365 Field Service resources to support both customer onsite inspections and final manufacturing inspections.
Requirements
Quality inspection app
Fabrikam is evaluating Microsoft Power Platform to determine whether it can meet the company's requirements for a manufacturing defect and quality inspection solution. Each machine produced must be subjected to a quality inspection at various points during production. Each machine must undergo a more extensive quality inspection before the machine can be shipped to the customer.
Inspection orders
Inspection orders must:
Allow entry of quality ratings of passed or failed for each quality metric identified for the machine being rated.
Include information about the person who performed each inspection step and any comments made by the inspector.
Be automatically marked as failed if one inspection step rating is marked as failed.
Be automatically marked for re-inspection should a machine fail inspection. The new inspection order must be created by using the originating inspection order as a template.
Inspectors must fill in findings comments and upload at least one photo for any inspection step that is marked as failed.
Inspection standardization
Standardized checklists must be stored in the solution for use by inspectors. A copy must be created when a new inspection is initiated. The solution must:
Prevent an inspector from proceeding to the next step of the checklist until required information for a step is entered.
Support the addition of steps to inspections to support custom features added to a machine for a customer.
Support the direct input of measurements from testing gauges to avoid incorrect readings being entered by inspectors.
Provide a visual representation of the testing measurement limits for each step. Include an indication of how the measured value compares to measurement limits and whether the measurement is within tolerance. Users must be able to configure the visualizations to display the minimum value and maximum value, and whether the reading is within the tolerance of a single targeted value. It must also be able to be used for maintenance inspections once the machine has been installed.
Support the ability to store photo references within each inspection step to document defects found during inspections.
Security
Users must be active employees of Fabrikam.
When a user signs into the inspection solution, the solution must display a picture of the employee who has signed in.
Supervisors must be able to modify standard checklists. Other employees must be prevented from modifying checklists.
You must prevent users from changing inspection order data once an inspection is marked as final.
Analytics and reporting
The solution must:
Provide metrics including existing and upcoming demand by inspection station, average time spent per user at a station, and average time a machine spends at each inspection point.
Provide metrics per inspector including number of inspections performed by month, and number of inspections per rating type (pass, fail).
Provide a printed quality certificate to be included with each machine.
Issues
During initial testing of the solution, testers report that they cannot see the photos taken during a previously failed inspection.
質問 # 27
You need to design the quality inspection order data model.
What should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/dynamics365/field-service/inspections
https://docs.microsoft.com/en-us/powerapps/maker/data-platform/create-edit-entity-relationships
質問 # 28
You are designing a data model for a Microsoft Power Platform solution.
The data model must meet the following requirements:
* When an account is assigned to a new salesperson, all opportunities that ate associated with the account must be assigned to the new salesperson.
* When a salesperson assigns a lead to another salesperson, all phone call activities related to the lead must be assigned to the new salesperson.
You need to recommend cascading strategies for the data model.
Which cascading strategy should you recommend? To answer, drag the appropriate cascading strategies to the correct requirements. Each cascading strategy may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content NOTE: Each correct selection is worthone point.
正解：
解説：
質問 # 29
You are designing a business strategy for a client who has a Power Platform solution.
The client works with critical data where any data loss creates a high risk.
You need to document the failover process for the stakeholders.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
正解：
解説：
1 - The application maker a service call to the datacenter.
2 - The application receives an exception after attempting the service call.
3 - The application redirects calls to an on-premises server.
4 - If the second call is successful, the application continues normally.
質問 # 30
A company provides mobile diagnostic imaging services. You are designing a Power Apps solution to manage patient appointments and procedures.
Patient records are stored within the company s cloud patient billing system. The patient ID must be the only information stored within the app. The patient name and date of birth must be visible to the technician to verify the patient's identity.
You need to recommend a solution to display the patient information.
What should you recommend?
- A. Custom dataflow
- B. Privacy preference
- C. Business rule
- D. Data gateway
- E. Virtual table
正解：E
解説：
Explanation
A virtual table is a custom table in Microsoft Dataverse that has columns containing data from an external data source. Virtual tables appear in your app to users as regular table rows, but contain data that is sourced from an external database, such as an Azure SQL Database. Rows based on virtual tables are available in all clients including custom clients developed using the Dataverse web services.
Reference:
https://docs.microsoft.com/en-us/powerapps/maker/data-platform/create-edit-virtual-entities
質問 # 31
A company plans to transition from an existing proprietary solution to a Power Platform solution. The company is consolidating data from several sources.
The company reports the following data quality issues with the existing solution:
Users often encounter a character limit when entering data.
The database includes multiple instances of duplicate records.
You need to recommend solutions to ensure that the data quality issues are not present in the Power Platform solution.
What should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation
Graphical user interface, text, application Description automatically generated
Box 1: Define the data type and format for each column
Increase the data type size of the column.
Box 2: Define and implement duplicate detection rules
Reference:
https://docs.microsoft.com/en-us/power-platform/admin/set-up-duplicate-detection-rules-keep-data-clean
質問 # 32
A company plans to create a Power Apps portal to manage support cases for customers. The company has an account hierarchy for customers. The hierarchy supports accounts, cases, and contacts where both contacts and cases belong to their relevant account.
The company has the following requirements:
Portal users must only see the notes for the cases that they manage.
Portal users must only see cases that are submitted by their colleagues.
You need to design the security model for the portal.
Which entity permission scope should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/powerapps/maker/portals/configure/assign-entity-permissions
質問 # 33
You need to recommend a solution to meet user interface requirements.
What should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/power-bi/visuals/power-bi-visualization-radial-gauge-charts
https://docs.microsoft.com/en-us/dynamics365/field-service/inspections
質問 # 34
You are performing a requirements analysis for a customer.
The customer provides the following requirements:
Power Platform storage capacity must remain under 100 percent.
Customer service representatives must be sent an email when they are assigned a case.
Help desk technicians must be shown an error message when they try to delete a task row.
The plug-in pass rate must remain over 99 percent for the production environment.
You need determine if the requirements are functional or non-functional.
Which requirement type should you use? To answer, drag the appropriate requirement types to the correct requirements. Each requirement type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/learn/modules/work-with-requirements/3-functional-requirements
https://docs.microsoft.com/en-us/learn/modules/work-with-requirements/4-non-functional-requirements
質問 # 35
You need to recommend methods to resolve the organization's issues.
What should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation
Graphical user interface, text, application, chat or text message Description automatically generated
Box 1: Add users to Microsoft 365.
Scenario: Users cannot view Power BI reports within the Power Platform apps.
Issue: The people you share with may see a locked tile in a dashboard, or a "Permission required" message when they try to view a report.
Solution: You need to grant them permission to the underlying dataset.
Go to the All or the Datasets + dataflows tab in your content list.
Select More options (...) next to a dataset, then select Manage permissions.
Select Add user.
Enter the full email addresses for individuals, distribution groups, or security groups.
Select Grant access.
Box 2: Configure an on-premises data gateway.
Scenario: The company plans to reference historical data in the [on-premises] existing system. The records held in these systems will not be migrated to the new solution except for medication information.
The on-premises data gateway acts as a bridge to provide quick and secure data transfer between on-premises data (data that isn't in the cloud) and several Microsoft cloud services. These cloud services include Power BI, PowerApps, Power Automate, Azure Analysis Services, and Azure Logic Apps. By using a gateway, organizations can keep databases and other data sources on their on-premises networks, yet securely use that on-premises data in cloud services.
Reference:
https://docs.microsoft.com/en-us/power-bi/collaborate-share/service-troubleshoot-sharing
https://docs.microsoft.com/en-us/power-bi/connect-data/service-gateway-onprem
https://docs.microsoft.com/en-us/powerapps/maker/data-platform/use-powerapps-checker
質問 # 36
You need to recommend solutions to meet the integration requirements.
What should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/dynamics365/field-service/configure-schedule-board
https://docs.microsoft.com/en-us/azure/iot-hub/about-iot-hub
質問 # 37
......
最新PL-600問題集試験解答はここにある：https://www.jpntest.com/shiken/PL-600-mondaishu