[2024年11月] 更新されたのはMicrosoft AZ-140問題集PDFオンラインエンジン
AZ-140.PDFで問題解答PDFサンプル問題は信頼され続ける
Microsoft AZ-140試験は、Microsoft Azure Virtual Desktopの設定と運用のスキルを証明したいITプロフェッショナル向けに設計されています。この試験は、セッションホストの管理、ユーザーアクセスの管理、セキュリティとコンプライアンスの実装など、さまざまなトピックをカバーしており、Azure管理者として認定されたい個人に最適です。
質問 # 94
-
You have an Azure Virtual Desktop deployment that contains a host pool named HostPool1.
You need to perform the following configurations for HostPool1:
* Set the scale factor of the remote session to 125 percent.
* Generate a registration key that expires after five days.
* Enable Start VM on connect.
Which three settings should you modify? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
質問 # 95
You need to configure the device redirection settings. The solution must meet the technical requirements.
Where should you configure the settings?
- A. Pool1
- B. Workspace1
- C. Group1
- D. MontrealUsers
正解：A
質問 # 96
Your company has a single office and has 40 employees.
You ate planning a Azure Virtual Desktop deployment. The estimated user workloads are shown in the following table.
Half the users of each workload type work from home. All the users who work from home do NOT establish a VPN connection to the office. Approximately how much bandwidth is needed between the office and Azure lo support the planned workloads?
- A. 110 Mbps
- B. 55 Mbps
- C. 9.5 Mbps
- D. 220 Mbps
正解：B
質問 # 97
Which setting should you modify for VNET4 before you can deploy Pool4?
- A. DNS servers
- B. Address space
- C. Peerings
- D. Access control (1AM)
- E. Service endpoints
正解：A
解説：
DNS should be configured to use an Active Directory Domain Controller.
質問 # 98
You have an Azure Virtual Desktop host pool named Pool1 and an Azure Storage account named storage1. Pool1 and storage1 are in the same Azure region.
The current network utilization of the session hosts during peak hours is 95%.
You plan to use FSLogix profile containers stored in storage1 for users that connect to Pool1.
You need to configure the session hosts and storage1 to minimize network latency when loading and updating profiles.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/azure/architecture/example-scenario/wvd/windows-virtual-desktop-fslogix
質問 # 99
You have a Windows Virtual Desktop deployment.
You have a session host named Host1 that has the disk layout shown in the exhibit. (Click the Exhibit tab.)
You plan to deploy an app that must be installed on D. The app requires 500 GB of disk space.
You need to add a new data disk that will be assigned the drive letter D. The solution must maintain the current performance of Host1.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
正解：
解説：
Explanation
Reference:
https://www.azurecorner.com/change-temporary-drive-azure-vm-use-d-persistent-data-disks/
質問 # 100
You are automating the deployment of an Azure Virtual Desktop host pool.
You deploy the Azure Resource Manager (ARM) template shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the Dockerfile.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation
Graphical user interface, text, application Description automatically generated
Reference:
https://docs.microsoft.com/en-us/azure/virtual-desktop/virtual-desktop-fall-2019/configure-host-pool-personal-de
質問 # 101
You need to recommend a DNS infrastructure that meet the performance requirements. What should you recommend? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation
質問 # 102
You have an Azure Virtual Desktop host pool.
You add a French language pack to each session host in the host pool.
Several days later, users report that English displays when they connect to Azure Virtual Desktop.
After an investigation, you discover that the French language pack was removed, and the session hosts reverted to English.
You need to ensure that the French language pack is always available on the session hosts.
What should you do?
- A. Assign a default time zone on each host.
- B. Apply a Group Policy setting that blocks the cleanup of unused language packs.
- C. Apply a Group Policy setting to disable the Time & language settings.
- D. Configure the international settings on each host.
正解：C
解説：
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/languages-overview?view=windows-1
質問 # 103
Your network contains an on-premises Active Directory domain named contoso.com that syncs to an Azure Active Directory (Azure AD) tenant You have an Azure Virtual Desktop host pool named Pool1 that has the following settings:
* Host pool name- Pool 1
* Host pool type: Personal
* Number of VMs: 3
The session hosts have the following configurations:
* Image used to create the virtual machines: Windows 10 Enterprise
* Virtual machines domain-Joined to: On-premises conroso.com domain
You need to ensure that you can use Microsoft EndPoint Manager to manage security updates on the session hosts. What should you do?
- A. Change Host pool type to Pooled and specify Load balancing algorithm as Breadth-first
- B. Configure the session hosts as hybrid Azure AD-joined.
- C. Change Host pool type to Pooled and specify Load balancing algorithm as Depth-first
- D. Create Windows 10 Enterprise multi-session images.
正解：B
質問 # 104
You have an Azure Virtual Desktop host pool named Pool1, an application named App1, and an Azure file share named Share1.
You need to ensure that you can publish App1 to Pool1 by using MSIX app attach.
Which four actions should you perform in sequence before you publish App1? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
正解：
解説：
Explanation
Graphical user interface, text Description automatically generated
Reference:
https://docs.microsoft.com/en-us/windows/msix/packaging-tool/create-app-package
https://docs.microsoft.com/en-us/azure/virtual-desktop/app-attach-image-prep
質問 # 105
You have a Azure Virtual Desktop deployment that uses Microsoft 355 cloud services including Microsoft Teams.
Users use the Remote Desktop client to connect to the deployment from computers that run Windows 10 You need to support audio and video in Azure Virtual Desktop and provide the users with access to Microsoft Teams calling and meeting features.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Install the Microsoft Teams WebSocket Service on the virtual machines.
- B. Install the Microsoft Teams desktop app on the Windows 10 computers.
- C. Configure the IsWVDEnvironment registry key on the virtual machines.
- D. Install the Microsoft Teams WebSocket Service on the Windows 10 computers.
- E. Install the Microsoft Teams desktop app on the virtual machines.
- F. Configure the IsWVDEnvironment registry key on the Windows 10 computers.
正解：B、F
質問 # 106
Your company has a main office and two branch offices. Each office connects directly to the internet. The router in each branch office is configured as an endpoint for the following VPNs:
* A VPN connection to the main office
* A site-to-site VPN to Azure
The routers in each branch office have the Quality of Service (QoS) rules shown in the following table.
Users in the branch office report slow responses and connection errors when they attempt to connect to Windows Virtual Desktop resources.
You need to modify the QoS rules on the branch office routers to improve Windows Virtual Desktop performance.
For which rule should you increase the bandwidth allocation?
- A. Rule4
- B. Rule3
- C. Rule2
- D. Rule1
正解：D
解説：
Reference:
https://docs.microsoft.com/en-us/azure/virtual-desktop/rdp-quality-of-service-qos
質問 # 107
You have an Azure subscription that contains an Azure Virtual Desktop deployment. The deployment contains
25 session hosts.
You create two storage accounts as shown in the following table.
The storage accounts store Azure Virtual Desktop user profile data.
You plan to deploy FSLogix user Profile Containers that will use Cloud Cache.
You need to configure the FSLogix registry settings for each session host.
How should you complete the registry settings? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation:
質問 # 108
-
You have an Azure Virtual Desktop host pool named HostPool1 that must support 60 sessions.
The session hosts for HostPool1 are configured as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation
Graphical user interface, text, application, email Description automatically generated
質問 # 109
You have the devices shown in the following table.
You plan to deploy Azure Virtual Desktop for client access to remote virtualized apps.
Which devices support the Remote Desktop client?
- A. Device1 only
- B. Device1 and Device2 only
- C. Device1, Device2, and Device3
- D. Device1 and Device3 only
正解：D
質問 # 110
You plan to implement the FSLogix profile containers for the Seattle office.
Which storage account should you use?
- A. storage4
- B. storage1
- C. storage3
- D. storage2
正解：D
解説：
Reference:
https://docs.microsoft.com/en-us/azure/virtual-desktop/store-fslogix-profile
質問 # 111
You have an Azure Active Directory (Azure AD) tenant named contoso.com.
You use a user account named Admin1 to deploy an Azure Active Directory Domain Services (Azure AD DS) managed domain named aaddscontoso.com to a virtual network named VNET1.
You plan to deploy an Azure Virtual Desktop host pool named Pool1 to VNET1.
You need to ensure that you can use the Admin1 user account to deploy Windows 10 Enterprise session hosts to Pool1.
What should you do first?
- A. Assign the Cloud device administrator role to Admin1.
- B. Assign a Microsoft 365 Enterprise E3 license to Admin1.
- C. Change the password of Admin1.
- D. Add Admin1 to the AA Change Host pool type to Pooled and specify Load D DC Administrators group ofcontoso.com.
正解：D
解説：
Reference:
https://docs.microsoft.com/en-us/azure/virtual-desktop/create-host-pools-azure-marketplace?tabs=azure-portal
Topic 2, Contoso. Ltd
Existing Infrastructure
Active Directory
The network contains an on-premises Active Directory domain named contoso.com and an Azure Active Directory (Azure AD) tenant. One of the domain controllers runs as an Azure virtual machine and connects to a virtual network named VNET1. All internal name resolution is provided by DNS server that run on the domain controllers.
The on-premises Active Directory domain contains the organizational units (OUs) shown in the following table.
The on-premises Active Directory domain contains the users shown in the following table.
The Azure AD tenant contains the cloud-only users shown in the following table.
Existing Infrastructure. Network Infrastructure
All the Azure virtual networks are peered. The on-premises network connects to the virtual networks.
All servers run Windows Server 2019. All laptops and desktop computers run Windows 10 Enterprise.
Since users often work on confidential documents, all the users use their computer as a client for connecting to Remote Desktop Services (RDS).
In the West US Azure region, you have the storage accounts shown in the following table.
Existing Infrastructure. Remote Desktop Infrastructure
Contoso has a Remote Desktop infrastructure shown in the following table.
Requirements
Planned Changes
Contoso plans to implement the following changes:
Implement FSLogix profile containers for the Paris offices.
Deploy a Windows Virtual Desktop host pool named Pool4.
Migrate the RDS deployment in the Seattle office to Windows Virtual Desktop in the West US Azure region.
Requirements. Pool4 Configuration
Pool4 will have the following settings:
Host pool type: Pooled
Max session limit: 7
Load balancing algorithm: Depth-first
Images: Windows 10 Enterprise multi-session
Virtual machine size: Standard D2s v3
Name prefix: Pool4
Number of VMs: 5
Virtual network: VNET4
Requirements. Technical Requirements
Contoso identifies the following technical requirements:
Before migrating the RDS deployment in the Seattle office, obtain the recommended deployment configuration based on the current RDS utilization.
For the Windows Virtual Desktop deployment in the Montreal office, disable audio output in the device redirection settings.
For the Windows Virtual Desktop deployment in the Seattle office, store the FSLogix profile containers in Azure Storage.
Enable Operator2 to modify the RDP Properties of the Windows Virtual Desktop deployment in the Montreal office.
From a server named Server1, convert the user profile clicks to the FSLogix profile containers.
Ensure that the Pool1 virtual machines only run during business hours.
Use the principle of least privilege.
質問 # 112
You have an Azure Virtual Desktop deployment.
You plan to use FSLogix profile containers.
You need to recommend a solution that will be used to store the containers. The solution must meet the following requirements:
* The containers must be stored on solid-state drives (SSDs)
* Minimize administrative effort
* Minimize cost
the What should you recommend?
- A. Azure Blob Storage Premium
- B. Azure NetApp Files
- C. Azure Files Standard
- D. Azure Files Premium
正解：D
質問 # 113
......
Microsoft AZ-140問題集PDFのベストを目指すなら問題集を使おう 目指そう高得点：https://www.jpntest.com/shiken/AZ-140-mondaishu
Microsoft Certified AZ-140試験と認定テストエンジン：https://drive.google.com/open?id=12bu3Qzn0gq6HT6SOXrRqwsnUhQNEZqJd