2026年最新の有効な200-301試験最新問題で2026年最新の学習ガイド
200-301認定で究極のガイド [2026年更新]
Cisco 200-301試験は、ネットワーキングのキャリアを追求したい人にとって必要不可欠な認定試験です。この試験は、ネットワーキングに関連する広範なトピックをカバーしており、試験に合格することで、候補者が小規模から中規模のネットワークをインストール、設定、運用、トラブルシューティングする能力を証明します。候補者は、Ciscoが提供するさまざまなトレーニングオプションや学習資料を活用して、試験に備えることができます。
質問 # 482
Refer to the exhibit.
An administrator must configure interfaces Gi1/1 and Gi1/3 on switch SW11 PC-1 and PC-2 must be placed in the Data VLAN and Phone-1 must be placed in the Voice VLAN Which configuration meets these requirements?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
正解：A
質問 # 483
DRAG DROP
Drag and drop the networking parameters from the left on to the correct values on the right.
Select and Place:
正解：
解説：
Section: Network Fundamentals
Explanation:
SSH uses TCP port 22 while SNMP uses UDP port 161 and 162.
質問 # 484
Refer to the exhibit.
What is a reason for poor performance on the network interface?
- A. The bandwidth setting of the interface is misconfigured
- B. The cable connection between the two devices is faulty.
- C. The interface is operating at a different speed than the connected device.
- D. The interface is receiving excessive broadcast traffic.
正解：D
質問 # 485
Refer to Exhibit.
Rotor to the exhibit. The IP address configurations must be completed on the DC-1 and HQ-1 routers based on these requirements:
DC-1 Gi1/0 must be the last usable address on a /30
DC-1 Gi1/1 must be the first usable address on a /29
DC-1 Gi1/2 must be the last usable address on a /28
HQ-1 Gil/3 must be the last usable address on a /29
Drag and drop the commands from the left onto the destination interfaces on the right. Not all commands are used
正解：
解説：
質問 # 486
Which two encoding methods are supported by REST APIs? (Choose two)
- A. JSON
- B. YAML
- C. EBCDIC
- D. XML
- E. SGML
正解：B、D
質問 # 487
Refer to the exhibit.
What is the effect of this configuration?
- A. The switch discard all ingress ARP traffic with invalid MAC-to-IP address bindings.
- B. All ingress and egress traffic is dropped because the interface is untrusted
- C. Egress traffic is passed only if the destination is a DHCP server.
- D. All ARP packets are dropped by the switch
正解：A
質問 # 488
What is a characteristic of private IPv4 addressing?
- A. used as the NAT outside global IP address
- B. enables secure connectivity over the internet
- C. reduces the forwarding table on network routers
- D. alleviates the shortage of IPv4 addresses
正解：B
質問 # 489
Refer to the exhibit.
Which password must an engineer use to enter the enable mode?
- A. default
- B. cisco123
- C. adminadmin123
- D. testing 1234
正解：D
質問 # 490 
Refer to the exhibit. Configurations for the switch and PCs are complete.
Which configuration must be applied so that VLANs 2 and 3 communicate back and forth?
- A. interface GigabitEthernet0/0 ip addresss 10.10.2.10 255.255.252.0
- B. interface GigabitEthernet0/0.3 encapsulation dot1Q 3 native ip addresss 10.10.2.10 255.255.252.0
- C. interface GigabitEthernet0/0.10 encapsulation dot1Q 3
- D. interface GigabitEthernet0/0.3 encapsulation dot1Q 10 ip addresss 10.10.2.10 255.255.252.0
正解：B
解説：
interface GigabitEthernet0/0.3 encapsulation dot1Q 3 native ip addresss 10.10.2.10 255.255.252.0. Cisco wireless design separates RF behavior, client authentication, encryption, AP operating mode, and controller management. A WLC centralizes WLAN configuration and AP control, while lightweight APs use CAPWAP to register and exchange control/data information with the controller. Security choices such as WPA2/AES and WPA3/SAE are not interchangeable with older mechanisms such as WEP, TKIP, or RC4. RF questions also depend on channel planning: adjacent cells should avoid overlapping channels, and 5-GHz preference features reduce congestion in the 2.4-GHz band. The incorrect options generally confuse AP mode, authentication, encryption, or controller responsibilities. Cisco CCNA 200-301 v1.1 includes these items because wireless failures often come from using the right-looking feature in the wrong part of the WLAN design. The selected answer is the Cisco-consistent configuration or behavior for this wireless scenario.
質問 # 491
Which technology is a critical component of a cloud-based architecture?
- A. MPLS
- B. DNS
- C. IPv6
- D. DHCP
正解：B
質問 # 492
Refer to the graphic. R1 is unable to establish an OSPF neighbor relationship with R3. What are possible reasons for this problem? (Choose two.)
- A. R1 and R2 are the DR and BDR, so OSPF will not establish neighbor adjacency with R3.
- B. The hello and dead interval timers are not set to the same values on R1 and R3.
- C. EIGRP is also configured on these routers with a lower administrative distance.
- D. All of the routers need to be configured for backbone Area 1.
- E. R1 and R3 are configured in different areas.
- F. A static route has been configured from R1 to R3 and prevents the neighbor adjacency from being established.
正解：B、E
解説：
Section: IP Connectivity
Explanation:
This question is to examine the conditions for OSPF to create neighborhood. So as to make the two routers become neighbors, each router must be matched with the following items:
1. The area ID and its types
2. Hello and failure time interval timer
3. OSPF Password (Optional)
質問 # 493
Drag and drop the SNMP components from the left onto the descriptions on the right.
正解：
解説：
質問 # 494
Which option about JSON is true?
- A. used to describe structured data that includes arrays
- B. uses predefined tags or angle brackets () to delimit markup text
- C. similar to HTML, it is more verbose than XML
- D. used for storing information
正解：A
解説：
JSON data is written as name/value pairs.
A name/value pair consists of a field name (in double quotes), followed by a colon, followed by a value:
"name":"Mark"
JSON can use arrays. Array values must be of type string, number, object, array, boolean or null..
For example:
{
"name":"John",
"age":30,
"cars":[ "Ford", "BMW", "Fiat" ]
}
質問 # 495
Refer to the exhibit.
When router R1 is sending traffic to IP address 10.56.192 1, which interface or next hop address does it use to route the packet?
- A. Vlan57
- B. 10.56.0.1
- C. 10.56.128.19
- D. 0.0.0.0.0/0
正解：B
質問 # 496
Refer to the exhibit.
The New York router is configured with static routes pointing to the Atlanta and Washington sites. Which two tasks must be performed so that the Serial0/0/0 interfaces on the Atlanta and Washington routers can reach one another?
(Choose two.)
- A. Configure the ipv6 route 2023::/126 2012::2 command on the Atlanta router
- B. Configure the ipv6 route 2012::/126 2023::1 command on the Washington router
- C. Configure the ipv6 route 2023::/126 2012::1 command on the Atlanta router
- D. Configure the ipv6 route 2012::/126 s0/0/0 command on the Atlanta router
- E. Configure the ipv6 route 2012::/126 2023::2 command on the Washington router
正解：A、E
質問 # 497
Refer to the exhibit.
A network administrator must permit SSH access to remotely manage routers in a network. The operations team resides on the 10.20.1.0/25 network. Which command will accomplish this task?
- A. access-list 2699 permit udp 10.20.1.0 0.0.0.255
- B. no access-list 2699 deny tcp any 10.20.1.0 0.0.0.127 eq 22
- C. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
- D. no access-list 2699 deny ip any 10.20.1.0 0.0.0.255
正解：D
解説：
Explanation
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.
質問 # 498
Drag and drop the characteristic from the left onto the IPv6 address type on the right.
正解：
解説：
Explanation:
質問 # 499
Which type of DNS record is used to specify the mail server responsible for accepting email messages on behalf of a recipient's domain?
- A. A record
- B. SRV record
- C. MX record
- D. TXT record
正解：C
解説：
An MX record identifies the mail servers that handle email for a domain and their priority. When an email is sent, the sending mail server queries the DNS for the MX records of the recipient's domain to know where to deliver the email.
質問 # 500
Drag and drop the descriptions of file-transfer protocols from the left onto the correct protocols on the right.
正解：
解説：
Explanation:
質問 # 501
What is a function of Cisco Advanced Malware Protection for a Next-Generation IPS?
- A. authorizing potentially compromised wireless traffic
- B. inspecting specific files and file types for malware
- C. URL filtering
- D. authenticating end users
正解：B
解説：
AMP gives you real-time blocking of malware and advanced sandboxing, that is backed up by world class global threat intelligence, to provide rapid detection, containment and removal of advanced malware
https://www.cisco.com/c/en/us/products/security/amp-appliances/index.html
質問 # 502
Exhibit.
The switches are connected via a Cat5 Ethernet cable that was successfully tested. The Interfaces are configured as access ports and are both in a 'down" status. What is the cause of this issue?
- A. The speed settings on the switches are mismatched.
- B. The distance between the two switches is not supported by Cut5.
- C. The switches are configured with incompatible duplex settings.
- D. The portfast command is missing from the configuration.
正解：A
質問 # 503
Refer to the exhibit.
What is the subnet mask of the route to the 10.10.13.160 prefix?
- A. 255.255.255.248
- B. 255.255.255.240
- C. 255.255.248.
- D. 255.255.255.128
正解：A
質問 # 504
While examining excessive traffic on the network, it is noted that all incoming packets on an interface appear to be allowed even though an IPv4 ACL is applied to the interface. Which two misconfigurations cause this behavior? (Choose two.)
- A. The packets fail to match any permit statement
- B. A matching permit statement is too high in the access list
- C. A matching permit statement is too broadly defined
- D. The ACL is empty
- E. A matching deny statement is too high in the access list
正解：B、C
解説：
Section: Security Fundamentals
質問 # 505
......
Cisco 200-301の認定を取得することで、ITプロフェッショナルのキャリアに多くの機会が開かれます。世界的に認められ、雇用者から高く評価されています。この認定を取得することで、ネットワーク管理者、ネットワークエンジニア、ネットワークスペシャリストなどの職種に応募することができます。また、Cisco Certified Network Professional（CCNP）やCisco Certified Internetwork Expert（CCIE）などの上級認定を取得することで、キャリアをさらに進めることができます。
200-301練習試験と学習ガイドは厳密検証されたにはJPNTest：https://www.jpntest.com/shiken/200-301-mondaishu
2026年最新のな厳密検証された合格させる200-301学習ガイドベズトお試しセット：https://drive.google.com/open?id=1WSuR11K6mkVDS8u5sAsAXfA1_erBS3GV