API-936事前に試験練習テストで使おう（最新100問題)
有効なAPI-936試験解答PDF一年無料更新
API-936（耐火物の専門職員）試験は、耐火物の設置、検査、試験、修理の分野で働く個人の知識とスキルを評価する業界承認の認定プログラムです。この試験は、石油・ガス業界の主要な標準設定団体であるアメリカ石油協会（API）によって開発・実施されています。
質問 # 42
The air pressure to blast the 1000 g of size graded silicon carbide grain for abrasion resistance test should be
- A. 450 KPa
- B. 400 KPa
- C. None of the above
- D. 448 KPa (65 PSi)
正解：D
質問 # 43
Refractory cast into a mock-up may be stripped and visually inspected after a minimum curing of
- A. 12 hrs
- B. 24 hrs
- C. 16 hrs
- D. 8 hrs
正解：A
質問 # 44
Refractory lined pipe used for the transport of hot particulate medium and gases between process vessels is called
- A. None of the above
- B. Fractionator of FCCU
- C. Transfer line of FCCU
- D. Standpipe of FCCU
正解：C
質問 # 45
The color of stripe for Inconel 600 alloy material of metallic anchor is
- A. 1 solid black
- B. None of the above
- C. 2 solid black
- D. 2 solid blue
正解：D
質問 # 46
Refractory packing requirements, the weight in the bag, shall not deviate by more than
- A. ± 2%
- B. ± 4%
- C. ± 3%
- D. ±1%
正解：A
質問 # 47
Section of transfer line in which flow is in an upward direction is called
- A. Cyclone of FCCU
- B. Plenum of FCCU
- C. None of the above
- D. Riser of FCCU
正解：D
質問 # 48
Metallic anchor made from rod or bar and usually used for dual layer linings that are configured in
- A. All of the above
- B. U shape
- C. V shape
- D. Y shape
正解：D
質問 # 49
Colour coding does not require for anchor alloy of
- A. SS310
- B. None of the above
- C. Carbon steel
- D. SS304
正解：C
質問 # 50
Test panels for pneumatic gunning are inclined above the horizontal at an angle of
- A. 45?
- B. None of the above
- C. 60?
- D. 30?
正解：A
質問 # 51
Modulus of rupture test for castable refractories, the test specimen shall be
- A. 6 x 2 x 2 in
- B. None of the above
- C. 8 x 2 x 2 in
- D. 9 x 2 x 2 in (228 x 51 x 51mm)
正解：D
質問 # 52
The functions of refractories include resistance to other destructive influences such as abrasion, pressure, chemical attack, and or rapid changes in temperature is called.
- A. None of the above
- B. Secondary function
- C. Primary function
- D. Tertiary function
正解：B
質問 # 53
Enclosure inside the top head of a reactor or regenerator vessel which supports the cyclones and in which gases exiting the cyclone outlets are collected is called
- A. Cyclone of FCCU
- B. Plenum of FCCU
- C. Riser of FCCU
- D. None of the above
正解：B
質問 # 54
API 936, the standard test method for abrasion resistance of refractory materials at room temperature is
- A. None of the above
- B. C 704 - 01
- C. C 113 - 02
- D. C 181 - 91
正解：B
質問 # 55
The vessel downstream of the reactor used to separate different product fractions is called
- A. Fractionator of FCCU
- B. None of the above
- C. Transfer line of FCCU
- D. Standpipe of FCCU
正解：A
質問 # 56
The vessel in which coke and residual hydrocarbons are burned off the catalyst and the flue gas is then separated from the catalyst is called
- A. None of the above
- B. Cyclones of FCCU
- C. Reactor of FCCU
- D. Regenerator of FCCU
正解：D
質問 # 57
In API RP 936, the referenced ASTM standard procedure for cold crushing strength and modulus of rupture is
- A. C 133 - 97
- B. None of the above
- C. C704 - 01
- D. C181 - 91
正解：A
質問 # 58
Additives used to facilitate moisture removal of refractory linings during dry out are called
- A. Organic fiber
- B. None of the above
- C. Metal fiber
- D. Mineral fiber
正解：A
質問 # 59
For fire clay and some high alumina materials, the most commonly used index of refractoriness is known as:
- A. Pyrometric cone equivalent
- B. None of the above
- C. Refractoriness under load
- D. Refractoriness
正解：A
質問 # 60
A metallic anchor, usually V-stud which has a foot-shaped configuration at the base to aid weld attachment to the shell is called.
- A. None of the above
- B. V-anchor
- C. Footed anchor
- D. Stud weld
正解：C
質問 # 61
The vessel in which cracking reaction occurs or is completed and product gases are separated from coke and/or catalyst particulate is called
- A. Reactor of FCCU
- B. None of the above
- C. Regenerator of FCCU
- D. Cyclones of FCCU
正解：A
質問 # 62
The destructive chemical reaction between refractories and external agencies at high temperatures, resulting in the formation of a liquid is called
- A. Slumping of refractories
- B. None of the above
- C. Slagging of refractories
- D. Dusting of refractories
正解：C
質問 # 63
A group of rock minerals having nearly perfect cleavage in one direction and consisting of thin elastic plates and the most common varieties are muscovite and biotite is called
- A. Mica
- B. None of the above
- C. Corundum
- D. Kaolin
正解：A
質問 # 64
The color of stripe for 304L alloy material of metallic anchor is
- A. 1 solid black
- B. None of the above
- C. 2 solid black
- D. 1 solid grey
正解：C
質問 # 65
For modules of rupture test of brick and shapes, the preferred test specimen shall be standard
- A. 228 x 114 x 64 or 76mm
- B. 150 x 114 x 76mm
- C. None of the above
- D. 200 x 150 x 76mm
正解：A
質問 # 66
......
Refractory Personnel無料更新認定サンプル問題：https://www.jpntest.com/shiken/API-936-mondaishu