API-936問題集で2024年最新のAPI API-936試験問題
無料で使えるAPI-936ブレーン問題集でダウンロード（API-936テスト問題集無料更新された)
質問 # 48
A group of impure magnesium silicate minerals that occur in a fiberous form is known as
- A. Fused silica
- B. Asbestos
- C. None of the above
- D. Mineral fibre
正解：B
質問 # 49
A refractory materials, stiffer than plastic, that cannot be extruded but has suitable properties to permit ramming into place to form a monolithic structure
- A. Monolithic refractory
- B. Plastic refractory
- C. Ramming mix
- D. None of the above
正解：C
質問 # 50
The standard test method for abrasion resistance of refractory materials at room temperature is
- A. C 704 - 01
- B. C 181 - 91
- C. None of the above
- D. C 133 - 97
正解：A
質問 # 51
Blanket, Module, Bulk paper, rope, and vacuum formed shaped are:
- A. Unshaped refractory
- B. Refractory fibers
- C. All of the above
- D. Shaped refractory
正解：B
質問 # 52
Applicator qualification for plastic thick layer, the test panel with an applied lining thickness and anchorage shall be
- A. 500 x 500 mm
- B. 300 x 300 mm
- C. None of the above
- D. 600mm x 300 mm (24" x 12")
正解：D
質問 # 53
The term that describes the condition of pre-set refractory in which gravitational forces cause it to lose its desired shaped is called
- A. Slumping
- B. Punky
- C. Bloating
- D. None of the above
正解：A
質問 # 54
The vessel downstream of the reactor used to separate different product fractions is called
- A. Transfer line of FCCU
- B. Fractionator of FCCU
- C. None of the above
- D. Standpipe of FCCU
正解：B
質問 # 55
An internal component used for the separation of solids from flue or product gas in a fluid coking unit is called
- A. A cyclone
- B. Plenum
- C. None of the above
- D. Riser of FCU
正解：A
質問 # 56
All the samples for the CCs test must be dried at 220 to 230?C (105 to 110?C) for
- A. 20 hrs (overnight)
- B. 18 hrs (overnight)
- C. 12 hrs (overnight)
- D. 24 hrs (overnight)
正解：D
質問 # 57
Refractories whose major constituent is lime, magnesia, or both and which may react chemically with acid refractories, acid slags, or acid fluxes at a high temperature is known as
- A. None f the above
- B. Natural refractories
- C. Basic refractories
- D. Acid refractories
正解：C
質問 # 58
Refractory cast into a mock-up may be stripped and visually inspected after a minimum curing of
- A. 24 hrs
- B. 8 hrs
- C. 16 hrs
- D. 12 hrs
正解：D
質問 # 59
A separation between adjoining parts of a refractory lining that allows small expansive movements, such as those caused by thermal change is known as
- A. Thermal expansion
- B. Thermal conductivity
- C. None of the above
- D. Expansion joint
正解：D
質問 # 60
Which function of refractories is to resist temperature?
- A. Tertiary function
- B. Secondary function
- C. Primary function
- D. None of the above
正解：C
質問 # 61
In API RP 936, the referenced ASTM standard procedure for cold crushing strength and modulus of rupture is
- A. C181 - 91
- B. C 133 - 97
- C. C704 - 01
- D. None of the above
正解：B
質問 # 62
The destructive chemical reaction between refractories and external agencies at high temperatures, resulting in the formation of a liquid is called
- A. Slagging of refractories
- B. Dusting of refractories
- C. Slumping of refractories
- D. None of the above
正解：A
質問 # 63
Arrange for testing at either an independent laboratory or the manufacturer's plant is
- A. Owner responsibility
- B. Manufacturer responsibility
- C. Contractor responsibility
- D. Inspector responsibility
正解：C
質問 # 64
API 936 documentation should content
- A. Quality standards
- B. All above
- C. Execution details
- D. Design details
正解：B
質問 # 65
Materials having refractory properties which form a refractory body when bonded into a conglomerate mass by a matrix is called
- A. Refractory mass
- B. Refractory aggregate
- C. None of the above
- D. Cementitious concrete
正解：B
質問 # 66
Refractories means
- A. Hard to test
- B. Hard to fuse
- C. Hart to set
- D. None of the above
正解：B
質問 # 67
Refractory lined pipe used for the transport of hot particulate medium and gases between process vessels is called
- A. None of the above
- B. Fractionator of FCCU
- C. Transfer line of FCCU
- D. Standpipe of FCCU
正解：C
質問 # 68
The formation of slag takes place by chemical action and fusion at furnace operating temperature in the way of
- A. In smelting operation, through the combination of a flux, such as limestone, with the gangue or waste portion of the ore
- B. By chemical reaction between refractories and fluxing agents such as coal ash, or between two different types of refractories
- C. In the refining of metals by substances such as lime added for the purpose of affecting or aiding the refining
- D. All of the above
正解：A
質問 # 69
The vessel in which coke and residual hydrocarbons are burned off the catalyst and the flue gas is then separated from the catalyst is called
- A. Regenerator of FCCU
- B. Cyclones of FCCU
- C. Reactor of FCCU
- D. None of the above
正解：A
質問 # 70
The property of matter by virtue of which heat energy is transmitted through particles in contact.
- A. Thermal expansion
- B. Thermal shock
- C. Thermal conductivity
- D. None of the above
正解：C
質問 # 71
The exposure of a material or body to a rapid change in temperature which may have a deleterious effect
- A. Thermal expansion
- B. Thermal shock
- C. Thermal conductivity
- D. None of the above
正解：B
質問 # 72
The test specimen of castable refractory for cold crushing strength shall be
- A. 2 in. (51mm) cubes
- B. none of the above
- C. a or b
- D. Cylinders, 2 in. (51mm)in dia. by 2 in.(51 mm) height
正解：C
質問 # 73
......
API-936試験は、さまざまな耐火材料に関連する広範なトピックをカバーしており、異なる種類の耐火材料の特性、その応用、設置技術、検査方法などが含まれます。認定プログラムは、これらのトピックに関する知識と理解、そしてその知識を実践的な状況に適用する能力をテストするよう設計されています。API-936試験に合格するには、異なる産業環境における耐火材料とその振る舞いについての徹底的な理解が必要です。
検証済みのAPI-936問題集と解答で合格保証で試験問題集テストエンジン：https://www.jpntest.com/shiken/API-936-mondaishu
API-936問題集は合格保証付き！合格させるAPI-936試験：https://drive.google.com/open?id=1IUNHANe2Lmuxu-wJEoslU_eIOdrj8giT