C-S43-2023 PDF問題集で2025年03月22日最近更新された問題
C-S43-2023試験問題有効なC-S43-2023問題集PDF
SAP C-S43-2023 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 12
You cancel the technical completion of a work order. What are the effects? Note: There are 2 correct answers to this question?
- A. Open reservations are recompiled.
- B. Referenced notifications are put in Process again.
- C. Open purchase orders are recompiled.
- D. Open purchase requisitions are recompiled
正解：A、D
質問 # 13
Which of the following is a prerequisite for external refurbishment?
- A. Define the order type for external refurbishment.
- B. Activate the subcontracting indicator in an external activity.
- C. Assign an external work center to a maintenance order operation.
- D. Select the material group for externally refurbished materials.
正解：B
解説：
Maintenance Processing - Advanced Functions
質問 # 14
Which parameter in a maintenance strategy do you use to set the start/end date of the maintenance order?
- A. Initial/subsequent buffer
- B. Call horizon
- C. Package offset
- D. Scheduling type
正解：A
質問 # 15
What do you have to consider regarding a cross-plant planning scenario?
- A. It is only possible within the same company code.
- B. Only a maximum number of five maintenance plants can be assigned to a planning plant.
- C. Multiple planning plants are assigned to a maintenance plant (m: 1).
- D. Multiple maintenance plants are assigned to a planning plant (n: 1).
正解：D
解説：
A cross-plant planning scenario is a special planning process that allows you to carry out material requirements planning for various plants centrally. This facilitates the production of a product in another plant and it also guarantees a smooth flow of materials between different plants. In a cross-plant planning scenario, you can assign multiple maintenance plants to a planning plant (n: 1) or multiple planning plants to a maintenance plant (m: 1). This means that you can plan and execute maintenance orders in different plants using a common planning plant or a common maintenance plant. There is no limit on the number of maintenance plants that can be assigned to a planning plant, so answer B is incorrect. A cross-plant planning scenario is also possible across different company codes, as long as the plants belong to the same controlling area. Therefore, answer D is also incorrect. References: Cross-Plant Planning | SAP Help Portal and SAP S
/4HANA Asset Management: Plants from a Maintenance ... - SAP PRESS
質問 # 16
What are characteristics of the Preparation and Scheduling phase within phase-based maintenance?
Note: There are 2 correct answers to this question.
- A. The configuration of the order type decides whether you use Resource Scheduling or not.
- B. If you use the Resource Scheduling apps, you always dispatch orders and operations.
- C. The order moves to the Preparation phase once it is approved and released.
- D. Maintenance Planning Buckets give you a list of non-approved notifications.
正解：B、C
解説：
Maintenance Processing - Advanced Functions
質問 # 17
The maintenance engineer creates a strategy plan with the call object maintenance order. Shift factors are set to 100% which date is relevant for the calculation of future planned dates if the maintenance work is delayed?
- A. Actual finish date of the maintenance order
- B. Planned date of the next call, independent of maintenance order dates
- C. The date of the final confirmation
- D. Technical completion date of the maintenance order
正解：D
質問 # 18
Which requirements have to be fulfilled so that an Inspection Checklist with Inspection Lots is generated? Note: There are 2 correct answers to this question.
- A. An object list must have been generated manually or automatically.
- B. A PM task list with inspection point type must be assigned to the maintenance order.
- C. A checklist type must be assigned to the maintenance order header.
- D. An Inspection Plan and a technical object must be assigned to the same class.
正解：B、D
解説：
Maintenance Processing - Advanced Functions
質問 # 19
What is characteristic for a maintenance order with status REL- if you also consider the capabilities of business functions? Note: There are 3 correct answers to this question.
- A. The planner can change planned costs at the operation level
- B. The assignment of the notification to the maintenance order header cannot be deleted.
- C. The planner can change estimated costs only at the header level
- D. Goods receipts for external services can be entered.
- E. The controller can determine actual cost surcharges.
正解：A、B、D
解説：
* A maintenance order with status REL means that the order is released and ready for execution. At this stage, the following characteristics apply:
* A. Goods receipts for external services can be entered. This is true because external services are procured through purchase orders that are linked to the maintenance order. The service performer can post service entry sheets to record the executed work andconsumable materials. These service entry sheets can be approved and posted as goods receipts for external services1.
* B. The planner can change planned costs at the operation level. This is false because once the order is released, the planned costs are frozen and cannot be changed by the planner. The planner can only change the estimated costs at the header level2.
* C. The planner can change estimated costs only at the header level. This is true, but it is not a characteristic of a released order. The planner can change the estimated costs at any time, even before the order is released2.
* D. The controller can determine actual cost surcharges. This is true because the controller can use the business function LOG_EAM_CI_7 to calculate and post actual cost surcharges for maintenance orders. This function can be used for orders with status REL or TECO3.
* E. The assignment of the notification to the maintenance order header cannot be deleted. This is true because the notification is the source document for the maintenance order and provides the reason for the order. The notification can only be deleted if the order is deleted or set to status CRTD. References: 1: Lean and Limit Value Services in Maintenance Order 2: Maintenance Order Cost Analysis 3: Actual Cost Surcharges for Maintenance Orders : Notification Assignment to Maintenance Order
質問 # 20
The maintenance engineer creates a maintenance plan for service procurement.
Which of the following objects does the engineer assign to the maintenance plan item? Note: There are
2 correct answers to this question.
- A. Purchasing contract
- B. Framework order
- C. Internal order
- D. Settlement order
正解：B、D
解説：
Preventive Maintenance
質問 # 21
You want to display vehicle-specific data for a piece of equipment.
How do you proceed?
- A. Assign a view profile to the combination of equipment category and vehicle class.
- B. Assign a view profile to the combination of vehicle type and equipment category.
- C. Set the relevant flags in Customizing activity "Define Additional Business Views for Equipment Categories".
- D. Assign a view profile to an equipment category for fleet equipment.
正解：B
解説：
Technical Objects
質問 # 22
Which operations are possible when you cancel the technical completion of a maintenance order? Note: There are 2 correct answers to this question
- A. Change the pronty
- B. Cancel status Released.
- C. Book a goods receipt.
- D. Change the estimated costs.
正解：A、C
質問 # 23
Which model can be used for ABAP cloud-native development?
- A. The ABAP Cloud Development Model
- B. ABAP RESTful Application Programming Model
- C. The SAP S/4HANA Cloud Extensibility Model
正解：B
解説：
Managing Clean Core
質問 # 24
To which objects can a personnel number be directly assigned?
Note: There are 2 correct answers to this question.
- A. Maintenance plan
- B. Work center
- C. Business partner
- D. Planner group
正解：B、C
解説：
Organizational Units and Master Data
質問 # 25
Which settings must be customized to set up Inspection Checklist processing? Note: There are 2 correct answers to this question.
- A. Assign an Inspection Type to a Maintenance Order Type and a Planning Plant.
- B. Create a control key which expects inspection characteristic assignments.
- C. Assign an Inspection Type to a Maintenance Order Type.
- D. Maintain settings at plant level for usage decisions.
正解：C、D
解説：
Maintenance Processing - Advanced Functions
質問 # 26
Which SAP UI technology is used for the Report and Repair Malfunction app?
- A. SAPUI5
- B. Web Dynpro
- C. SAP GUI for HTML
- D. Business Server Pages
正解：A
解説：
Maintenance Processing - Basic Functions
質問 # 27
......
C-S43-2023問題集合格確定させる練習には82問があります：https://www.jpntest.com/shiken/C-S43-2023-mondaishu
C-S43-2023練習テスト問題解答更新された82問があります：https://drive.google.com/open?id=10x-WO6l-q_3fRhJnijlwjlJP9k87E8uu