SPLK-2003無料更新100%試験合格率保証 [2023]
[2023年12月] 認証されたSplunk試験問題集でSPLK-2003試験学習ガイド
SPLK-2003 認定試験は、Splunk Phantom プラットフォームを効果的に管理・活用するために必要な知識とスキルを検証するために設計されています。この試験では、Phantom のインストールと設定、プレイブックの作成と管理、Phantom を他のツールやプラットフォームと統合する方法など、様々なトピックを扱います。また、候補者が一般的な問題をトラブルシューティングし、ユーザーやリソースを効果的に管理できる能力も評価されます。
この試験は、インストールおよび設定、プレイブックの開発、自動化、統合、コラボレーション、およびレポート作成など、Splunk Phantom の管理に関連するさまざまなトピックをカバーする 70 問の多肢選択問題と多重選択問題から構成されています。試験時間は 90 分で、合格点は 70% です。候補者は、オンラインまたは Pearson VUE テストセンターで試験を受けることができます。
質問 # 29
Which of the following will show all artifacts that have the term results in a filePath CEF value?
- A. .../rest/artifact?_filter_cef_filePath_icontain=''results''
- B. .../result/artifact?_query_cef_filepath_icontains=''results
- C. .../result/artifacts/cef/filePath= '%results%''
- D. ...rest/artifacts/filePath=''%results%''
正解：A
解説：
Explanation
The correct answer is A because the _filter parameter is used to filter the results based on a field value, and the icontain operator is used to perform a case-insensitive substring match. The filePath field is part of the Common Event Format (CEF) standard, and the cef_ prefix is used to access CEF fields in the REST API. The answer B is incorrect because it uses the wrong syntax for the REST API. The answer C is incorrect because it uses the wrong endpoint (result instead of artifact) and the wrong syntax for the REST API. The answer D is incorrect because it uses the wrong syntax for the REST API and the wrong spelling for the icontains operator.
Reference: Splunk SOAR REST API Guide, page 18.
質問 # 30
Some of the playbooks on the Phantom server should only be executed by members of the admin role. How can this rule be applied?
- A. Make sure the Execute Playbook capability is removed from al roles except admin.
- B. Add a tag with restricted access to the restricted playbooks.
- C. Place restricted playbooks in a second source repository that has restricted access.
- D. Add a filter block to al restricted playbooks that Titters for runRole - "Admin''.
正解：A
解説：
Explanation
The correct answer is C because the best way to restrict the execution of playbooks to members of the admin role is to make sure the Execute Playbook capability is removed from all roles except admin. The Execute Playbook capability is a permission that allows a user to run any playbook on any container. By default, all roles have this capability, but it can be removed or added in the Phantom UI by going to Administration > User Management > Roles. Removing this capability from all roles except admin will ensure that only admin users can execute playbooks. See Splunk SOAR Documentation for more details.
質問 # 31
When analyzing events, a working on a case, significant items can be marked as evidence. Where can ail of a case's evidence items be viewed together?
- A. Investigation page Evidence tab.
- B. At the bottom of the Investigation page widget panel.
- C. Evidence report.
- D. Workbook page Evidence tab.
正解：C
解説：
Explanation
The correct answer is B because the evidence report is a PDF document that contains all the evidence items of a case, along with the case details, phases, tasks, and comments. The evidence report can be generated from the Case Details page by clicking on the Generate Evidence Report button. The answer A is incorrect because the Workbook page Evidence tab only shows the evidence items that are associated with a specific phase or task of a case, not all the evidence items of the case. The answer C is incorrect because the Investigation page Evidence tab only shows the evidence items that are associated with a specific event or artifact of a case, not all the evidence items of the case. The answer D is incorrect because there is no such option at the bottom of the Investigation page widget panel. Reference: Splunk SOAR User Guide, page 64.
質問 # 32
An active playbook can be configured to operate on all containers that share which attribute?
- A. Label
- B. Artifact
- C. Tag
- D. Severity
正解：A
質問 # 33
What are indicators?
- A. Artifact values with special security significance.
- B. Action results that may appear in multiple containers.
- C. Artifact values that can appear in multiple containers.
- D. Action result items that determine the flow of execution in a playbook.
正解：C
質問 # 34
When working with complex datapaths, which operator is used to access a sub-element inside another element?
- A. :(colon)
- B. .(dot)
- C. !(pipe)
- D. *(asterisk)
正解：C
質問 # 35
Which of the following are the steps required to complete a full backup of a Splunk Phantom deployment' Assume the commands are executed from /opt/phantom/bin and that no other backups have been made.
- A. Within the UI: Select from the main menu Administration > Product Settings > Backup.
- B. Within the UI: Select from the main menu Administration > System Health > Backup.
- C. On the command line enter: rode sudo python ibackup.pyc --setup, then audo phenv python ibackup.pyc
--backup. - D. On the command line enter: sudo phenv python ibackup.pyc --backup -backup-type full, then sudo phenv python ibackup.pyc --setup.
正解：D
解説：
Explanation
The correct answer is B because the steps required to complete a full backup of a Splunk Phantom deployment are to first run the --backup --backup-type full command and then run the --setup command.
The --backup command creates a backup file in the /opt/phantom/backup directory. The --backup-type full option specifies that the backup file includes all the data and configuration files of the Phantom server.
The --setup command creates a configuration file that contains the encryption key and other information needed to restore the backup file. See Splunk SOAR Certified Automation Developer Track for more details.
質問 # 36
A customer wants to design a modular and reusable set of playbooks that all communicate with each other.
Which of the following is a best practice for data sharing across playbooks?
- A. Use the Handle method to pass data directly between playbooks.
- B. Use the py-postgresq1 module to directly save the data in the Postgres database.
- C. Create artifacts using one playbook and collect those artifacts in another playbook.
- D. Cal the child playbooks getter function.
正解：C
解説：
Explanation
The correct answer is C because creating artifacts using one playbook and collecting those artifacts in another playbook is a best practice for data sharing across playbooks. Artifacts are data objects that are associated with a container and can be used to store information such as IP addresses, URLs, file hashes, etc. Artifacts can be created using the add artifact action in any playbook block and can be collected using the get artifacts action in the filter block. Artifacts can also be used to trigger active playbooks based on their label or type. See Splunk SOAR Documentation for more details.
質問 # 37
After a successful POST to a Phantom REST endpoint to create a new object what result is returned?
- A. The full CEF name.
- B. The PostGres UUID.
- C. The new object ID.
- D. The new object name.
正解：B
質問 # 38
Within the 12A2 design methodology, which of the following most accurately describes the last step?
- A. List of the actions of the playbook design.
- B. List of the outputs of the playbook design.
- C. List of the apps used by the playbook.
- D. List of the data needed to run the playbook.
正解：B
解説：
Explanation
The correct answer is C because the last step of the 12A2 design methodology is to list the outputs of the playbook design. The outputs are the expected results or outcomes of the playbook execution, such as sending an email, creating a ticket, blocking an IP, etc. The outputs should be aligned with the objectives and goals of the playbook. See Splunk SOAR Certified Automation Developer for more details.
質問 # 39
On a multi-tenant Phantom server, what is the default tenant's ID?
- A. 0
- B. 1
- C. Default
- D. *
正解：A
解説：
Explanation
The correct answer is C because the default tenant's ID is 1. The tenant ID is a unique identifier for each tenant on a multi-tenant Phantom server. The default tenant is the tenant that is created when Phantom is installed and contains all the existing data and assets. The default tenant's ID is always 1 and cannot be changed. Other tenants have IDs that are assigned sequentially starting from 2. See Splunk SOAR Documentation for more details.
質問 # 40
Seventy can be set during ingestion and later changed manually. What other mechanism can change the severity or a container?
- A. Service level agreement (SLA) expiration
- B. Actions
- C. Playbooks
- D. Notes
正解：C
解説：
Explanation
Playbooks can change the severity of a container by using the set severity action block. This block allows the user to specify a new severity level for the container or use a variable from a previous action result. Notes and actions do not affect the severity of a container, and SLA expiration only affects the status of the container, not the severity. Reference, page 10.
質問 # 41
Which of the following is the complete list of the types of backups that are supported by Phantom?
- A. Full and incremental backups.
- B. Full, delta, and incremental backups.
- C. Full and delta backups.
- D. Full backups.
正解：C
解説：
Explanation
The correct answer is D because the Splunk SOAR product supports two types of backups: full and delta. A full backup is a complete backup of the entire Splunk SOAR system, including the configuration, data, and files. A delta backup is a partial backup of the Splunk SOAR system, which only includes the changes that have occurred since the last full backup. The answer A is incorrect because the Splunk SOAR product supports more than one type of backup. The answer B is incorrect because the Splunk SOAR product does not support incremental backups, which are backups of the changes that have occurred since the last backup of any type. The answer C is incorrect because the Splunk SOAR product does not support incremental backups, which are backups of the changes that have occurred since the last backup of any type. Reference: Splunk SOAR Admin Guide, page 67.
質問 # 42
A user has written a playbook that calls three other playbooks, one after the other. The user notices that the second playbook starts executing before the first one completes. What is the cause of this behavior?
- A. Synchronous execution has not been configured.
- B. Incorrect Join configuration on the second playbook.
- C. The steep option for the second playbook is not set to a long enough interval.
- D. The first playbook is performing poorly.
正解：A
解説：
Explanation
The correct answer is D because synchronous execution has not been configured. Synchronous execution is a feature that allows you to control the order of execution of playbook blocks. By default, Phantom executes playbook blocks asynchronously, meaning that it does not wait for one block to finish before starting the next one. This can cause problems when you have dependencies between blocks or when you call other playbooks.
To enable synchronous execution, you need to use the sync action in the run playbook block and specify the name of the next block to run after the called playbook completes. See Splunk SOAR Documentation for more details.
質問 # 43
Configuring Phantom search to use an external Splunk server provides which of the following benefits?
- A. The ability to run more complex reports on Phantom activities.
- B. The ability to automate Splunk searches within Phantom.
- C. The ability to ingest Splunk notable events into Phantom.
- D. The ability to display results as Splunk dashboards within Phantom.
正解：B
解説：
Explanation
The correct answer is C because configuring Phantom search to use an external Splunk server allows you to automate Splunk searches within Phantom using the run query action. This action can be used to run any Splunk search command on the external Splunk server and return the results to Phantom. You can also use the format results action to parse the results and use them in other blocks. See Splunk SOAR Documentation for more details.
質問 # 44
After enabling multi-tenancy, which of the Mowing is the first configuration step?
- A. Change the tenant permissions.
- B. Configure the default tenant.
- C. Select the associated tenant artifacts.
- D. Set default tenant base address.
正解：A
質問 # 45
During a second test of a playbook, a user receives an error that states: 'an empty parameters list was passed to phantom.act()." What does this indicate?
- A. The playbook is using an incorrect container.
- B. The playbook debugger's scope is set to new.
- C. The container has artifacts not parameters.
- D. The playbook debugger's scope is set to all.
正解：B
解説：
Explanation
The correct answer is C because the error message indicates that the playbook debugger's scope is set to new.
The scope option determines which containers are used for debugging the playbook. If the scope is set to new, the debugger will only use containers that are created after the debugger is started. If the scope is set to all, the debugger will use all containers that match the playbook's filter criteria. The error message means that the debugger did not find any new containers with parameters to pass to the phantom.act() function. See Splunk SOAR Documentation for more details.
質問 # 46
A filter block with only one condition configured which states: artifact.*.cef .sourceAddress !- , would permit which of the following data to pass forward to the next block?
- A. Non-null destinationAddresses
- B. Null IP addresses
- C. Null values
- D. Non-null IP addresses
正解：C
質問 # 47
Phantom supports multiple user authentication methods such as LDAP and SAML2. What other user authentication method is supported?
- A. PIV/CAC
- B. SAML3
- C. OpenID
- D. Biometrics
正解：B
質問 # 48
What is the default embedded search engine used by Phantom?
- A. Embedded Django search engine.
- B. Embedded Splunk search engine.
- C. Embedded Phantom search engine.
- D. Embedded Elastic search engine.
正解：D
質問 # 49
When is using decision blocks most useful?
- A. When evaluating complex, multi-value results or artifacts.
- B. When processing different data in parallel.
- C. When selecting one (or zero) possible paths in the playbook.
- D. When modifying downstream data hi one or more paths in the playbook.
正解：C
解説：
Explanation
Decision blocks are most useful when selecting one (or zero) possible paths in the playbook. Decision blocks allow the user to define one or more conditions based on action results, artifacts, or custom expressions, and execute the corresponding path if the condition is met. If none of the conditions are met, the playbook execution ends. Decision blocks are not used for processing different data in parallel, evaluating complex, multi-value results or artifacts, or modifying downstream data in one or more paths in the playbook. Reference, page 15.
質問 # 50
Which of the following are the default ports that must be configured on Splunk to allow connections from Phantom?
- A. SplunkWeb (8088), SplunkD (8089), HTTP Collector (8000)
- B. SplunkWeb (8089), SplunkD (8088), HTTP Collector (8000)
- C. SplunkWeb (8421), SplunkD (8061), HTTP Collector (8798)
- D. SplunkWeb (8000), SplunkD (8089), HTTP Collector (8088)
正解：D
質問 # 51
Which of the following are the steps required to complete a full backup of a Splunk Phantom deployment' Assume the commands are executed from /opt/phantom/bin and that no other backups have been made.
- A. Within the UI: Select from the main menu Administration > Product Settings > Backup.
- B. Within the UI: Select from the main menu Administration > System Health > Backup.
- C. On the command line enter: rode sudo python ibackup.pyc --setup, then audo phenv python ibackup.pyc
--backup. - D. On the command line enter: sudo phenv python ibackup.pyc --backup -backup-type full, then sudo phenv python ibackup.pyc --setup.
正解：D
質問 # 52
Which is the primary system requirement that should be increased with heavy usage of the file vault?
- A. Bandwidth of network.
- B. Number of processors.
- C. Amount of memory.
- D. Amount of storage.
正解：D
解説：
Explanation
The primary system requirement that should be increased with heavy usage of the file vault is the amount of storage. The file vault is a secure repository for storing files on Phantom. The more files are stored, the more storage space is needed. The other options are not directly related to the file vault usage. See [File vault] for more information.
質問 # 53
Which of the following is a best practice for use of the global block?
- A. Import packages which will be used within the playbook.
- B. Execute code at the beginning of each run of the playbook.
- C. Declare outputs which will be selectable within playbook blocks.
- D. Execute custom code after each run of the playbook.
正解：A
解説：
Explanation
The correct answer is C because the global block can be used to import packages that will be used within the playbook. This can be useful for importing external libraries or custom modules that provide additional functionality or logic for the playbook. The answer A is incorrect because the global block cannot be used to execute code at the beginning of each run of the playbook, as the global block is only executed once when the playbook is loaded. The answer B is incorrect because the global block cannot be used to declare outputs that will be selectable within playbook blocks, as the outputs are declared in the individual blocks that produce them. The answer D is incorrect because the global block cannot be used to execute custom code after each run of the playbook, as the global block is only executed once when the playbook is loaded. Reference: Splunk SOAR Playbook Development Guide, page 34.
質問 # 54
......
正真正銘のベスト試験材料はSPLK-2003オンライン練習試験：https://www.jpntest.com/shiken/SPLK-2003-mondaishu