[Q68-Q90] 準備できる1Y0-204問題解答は無料更新されて100%試験合格保証 [2026]

準備できる1Y0-204問題解答は無料更新されて100%試験合格保証 [2026]

問題集リアルなCitrix 1Y0-204試験問題 [更新されたのは2026年]

質問 # 68
Scenario: A Citrix Administrator maintains a Citrix Virtual Apps and Desktops Site with a large number of Windows users running various locally attached client printers. No network printers are being used. The administrator has enabled the HDX printer mapping policy to 'Auto-create all client printers', which has resulted in a large number of drivers being loaded onto the Virtual Delivery Agent (VDA) machines. New standards are requiring the administrator to limit these Windows drivers on the VDA machines.
Which printing feature can the administrator enable to meet the new standards?

A. The Auto-create PDF universal printer policy
B. The Citrix Universal Printer Driver
C. The Citrix Universal Print Server
D. The Auto-create local (non-network) client printers only policy

正解：B

質問 # 69
Scenario: A Citrix Administrator needs to configure StoreFront to allow external users access to internal resources. The external users will authenticate on StoreFront.
Which StoreFront authentication method can the administrator configure?

A. Pass-through from NetScaler Gateway
B. Smart card
C. Username and password
D. HTTP Basic

正解：C

質問 # 70
After creating a new machine catalog using the Machine Creation Services (MCS) wizard in Citrix Studio, a Citrix Administrator determines that Windows activation fails for all new machines in that catalog.
Which two conditions can cause this to happen? (Choose two.)

A. The Microsoft License Server is unreachable.
B. The version of Windows installed uses Multiple Activation Key (MAK) licensing.
C. The base image rearm count has been exceeded.
D. The version of Windows installed is Windows Server 2012 R2.

正解：B、C

解説：
Explanation
When using MCS to create machines, each machine is activated using the Microsoft Key Management Service (KMS) or Multiple Activation Key (MAK) licensing1. The base image that is used to create the machines must be rearmed before capturing it, and the rearm count must not be exceeded2. If the base image rearm count has been exceeded, the machines created from that image will not be activated. Similarly, if the version of Windows installed on the base image uses MAK licensing, the machines created from that image will not be activated, because MAK licensing is not supported by MCS3.
1: Create machine catalogs | Citrix Virtual Apps and Desktops 7 2308 2: Prepare a master image | Citrix Virtual Apps and Desktops 7 2308 3: Licensing | Citrix Virtual Apps and Desktops 7 2308

質問 # 71
Scenario: A Citrix Administrator needs to reduce costs by limiting users' printing sources. The administrator needs to stop automatic creation of all client printers in a session and map printers based on the floor of the building from which the user's session connects.
Which two policies should the administrator configure to complete this task? (Choose two.)

A. Direct connections to print servers
B. Session printers
C. Printer properties retention
D. Auto-create client printers

正解：B、D

解説：
To stop the automatic creation of all client printers and map printers based on location, the administrator should configure the Auto-create client printers policy to 'Do not auto-create client printers', and use the Session printers policy to map printers to users based on their session's connection location2.

質問 # 72
A Citrix Administrator has disabled User Subscriptions (Mandatory Store) for the StoreFront internal store.
Which two experiences will users have when they authenticate to the Citrix Virtual Apps and Desktops Site through the internal store? (Choose two.)

A. Users can choose which applications they would like to add to the desktop.
B. Users can manually add additional StoreFront stores if desired.
C. Applications will automatically be placed in the Start menu.
D. Users can choose which applications they would like to add to their Favorites.
E. Applications cannot be removed from Citrix Workspace app on the Favorites screen.

正解：C、E

解説：
When user subscriptions are disabled for a store (Mandatory Store), the following behaviors occur:
Users cannot subscribe to applications from the store. All the applications in the store are automatically subscribed to each user and appear in Citrix Workspace app. Users cannot remove applications from Citrix Workspace app on the Favorites screen. Users can organize their applications into folders using the Citrix Workspace app desktop. Applications are placed in the Start menu or the Applications folder on the user's device, depending on the Citrix Workspace app version and operating system.

質問 # 73
Scenario: A Citrix Administrator has executed the following command:

What will be the outcome of this configuration?

A. The users trying to access HTTP://SERVER.CITRIX.LAB will be connected to the Vserver MYVPN_http.
B. The
users trying to access http://server.citrix.lab will be connected to CS Vserver Vserver-CS-1.
C. The users trying to access HTTP://SERVER.CITRIX.LAB will be connected to CS Vserver Vserver-CS-1.
D. The users trying to access HTTP://SERVER.CITRIX.LAB will NOT be connected to the Vserver MYVPN_http.

正解：A

解説：
Explanation
According to the Citrix documentation, the command bind cs vserver MYVPN_http -lbvserver Vserver-CS-1 binds a load balancing virtual server to a content switching virtual server. This means that the content switching virtual server will forward the requests that match its policies to the load balancing virtual server. In this case, the content switching virtual server MYVPN_http has a policy that matches requests for http://server.citrix.lab, so it will forward those requests to the load balancing virtual server Vserver-CS-1. Therefore, the users trying to access http://server.citrix.lab will be connected to the Vserver MYVPN_http, which will then connect them to Vserver-CS-1.

質問 # 74
Scenario: ACitrixAdministrator currently manages a Citrix ADC environment in a retail company that is growing quickly and may soon double its volume of business. Currently, a Citrix ADC MPX 5550, which handles web and SSL transactions, is in place, but is close to full capacity. Due to the forecasted growth increase, the administrator needs to find a cost effective solution.
What can the administrator recommend to management in order to cost effectively handle the growth?

A. Perform hardware upgrade to Citrix ADC MPX 8005
B. Performance hardware upgrade to Citrix ADC SDX 14100
C. Perform license upgrade to Citrix ADC MPX 5650
D. Another MPX 5550 appliance

正解：C

解説：
Explanation
According to the Citrix Virtual Apps and Desktops 7 Deployment and Administration course, a license upgrade is a cost effective solution that allows an administrator to increase the performance of an existing Citrix ADC appliance without replacing the hardware. A license upgrade can provide more throughput, SSL transactions per second, and compression capability. In this scenario, a license upgrade from MPX 5550 to MPX 5650 can double the throughput and SSL transactions per second, which can handle the forecasted growth of the retail company1
1: Citrix Virtual Apps and Desktops 7 Deployment and Administration (CWS-215), Module 6: Citrix ADC High Availability, Lesson: Citrix ADC Optimization, Topic: Citrix ADC Optimization Overview, Slide 6.

質問 # 75
Scenario: A Citrix Administrator maintains a Citrix Virtual Apps and Desktops Site with a number of network print servers being used for all users. Currently, the print serves use native Windows drivers. No client printers are being used. New company guidelines require a reduction in the number of native drivers being used within the Site infrastructure.
Which step can the administrator take to meet the new company guidelines?

A. Install the Universal Print Server on all print servers in the Site and update the Universal printer usage policy setting.
B. Install the Universal Print Server on all print servers in the Site and leave the default Universal printer driver usage policy setting.
C. Enable the Citrix Universal Print Driver (EMF) driver and leave the default Universal printer driver usage policy setting.
D. Configure the Citrix Universal Generic Printer and update the Auto-create generic universal printer policy setting.

正解：D

解説：
Explanation
The Citrix Universal Generic Printer is a special type of auto-created printer that uses the Citrix Universal Print Driver and does not require any printer drivers to be installed on the server. It can reduce the number of native drivers being used within the Site infrastructure. To use this feature, the administrator must enable the Auto-create generic universal printer policy setting

質問 # 76
Scenario: A Citrix Administrator configured the "-denySSLReneg" Parametetr using the below command on Citrix ADC to enhance security.
set ssl parameter -denySSLReneg <option>
Which two options can the administrator use to complete the command? (Choose two.)

A. HIGHSECURE
B. FRONTEND_CLIENT
C. NONSECURE
D. NO
E. ALL

正解：B、C

解説：
According to the Citrix documentation, the -denySSLReneg parameter specifies the type of SSL renegotiation that the Citrix ADC denies. The possible options are:
NONSECURE: Deny renegotiation requests from a client if the initial handshake between the Citrix ADC and the client is not secure. A secure handshake is one in which both parties prove their identities to each other by presenting valid certificates.
FRONTEND_CLIENT: Deny renegotiation requests from a client on a front-end SSL connection, regardless of whether the initial handshake is secure or not. A front-end SSL connection is one in which the Citrix ADC communicates with the client over SSL.
ALL: Deny all renegotiation requests from a client on a front-end SSL connection and from a server on a back-end SSL connection. A back-end SSL connection is one in which the Citrix ADC communicates with the server over SSL.
NO: Allow all renegotiation requests.
Therefore, the correct answer is A and C.

質問 # 77
Scenario: A Citrix ADC MPX is using one of four 10G ports available in an environment. A Citrix Administrator found a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?

A. Plug another 10G Citrix ADC port into the router.
B. Purchase another Citrix ADC MPX appliance.
C. Add two more 10 Citrix ADC ports to the network and configure VLAN.
D. Add another 10G Citrix ADC port to the switch and configure Link Aggregation Control Protocol (LACP).

正解：D

質問 # 78
Scenario: A Citrix Administrator needs to reduce costs by limiting users' printing sources. The administrator needs to stop automatic creation of all client printers in a session and map printers based on the floor of the building from which the user's session connects.
Which two policies should the administrator configure to complete this task? (Choose two.)

A. Direct connections to print servers
B. Session printers
C. Printer properties retention
D. Auto-create client printers

正解：B、D

解説：
Explanation
To stop the automatic creation of all client printers and map printers based on location, the administrator should configure the Auto-create client printers policy to 'Do not auto-create client printers', and use the Session printers policy to map printers to users based on their session's connection location2.

質問 # 79
What is the minimum built-in delegated administration role required to create an Application Group?

A. Machine Catalog Administrator
B. Delivery Group Administrator
C. Host Administrator
D. Help Desk Administrator

正解：B

解説：
Explanation/Reference: https://docs.citrix.com/en-us/xenapp-and-xendesktop/7-15-ltsr/director/permissions.html

質問 # 80
Which tool can a Citrix Administrator utilize to verify that a policy is bound and showing the number of hits?

A. nstrace.sh
B. nscollect
C. nsconmsg
D. nstcpdump.sh

正解：C

解説：
The nsconmsg tool can be used to display the policy bound hits on a Citrix ADC appliance. This tool can show the number of times a policy was evaluated and the number of times it was hit. The nsconmsg tool can also display other statistics and information about the Citrix ADC configuration and performance1
1: Citrix ADC Command Reference

質問 # 81
Which Citrix Director view can a Citrix Administrator access to view the health of database services, the license server, and any hypervisor-hosting connections?

A. Dashboard
B. Trends
C. Applications
D. Alerts

正解：A

解説：
The Dashboard view in Citrix Director provides a real-time graphical representation of the health and usage of the site, including the database services, the license server, and any hypervisor-hosting connections12
1: Director - Citrix Product Documentation 2: Director Dashboard Explained - Citrix Blogs

質問 # 82
Which component can optionally be hosted in Citrix Cloud or in a customer-controlled resource location, when using the Citrix Virtual Apps and Desktops service?

A. Virtual Delivery Agent (VDA) machines
B. Site database
C. Citrix License Server
D. Citrix Gateway

正解：D

解説：
Explanation
Citrix Gateway can be hosted in Citrix Cloud or in a customer-controlled resource location. It provides secure remote access to Citrix Virtual Apps and Desktops service deployments.

質問 # 83
Scenario: A Citrix Administrator is enabling TLS Secure connections between the Cloud Connectors and on-premises StoreFront. After configuring the TLS certificate on all Cloud Connectors and disabling HTTP connections, the administrator finds that no resources are being enumerated.
Which extra step does the administrator need to take to allow enumeration to work between on-premises StoreFront and Citrix Cloud?

A. Change transport type to HTTPS in the StoreFront store DDC list.
B. Configure Cloud Connectors to allow unsecured connections.
C. Install Internet Information Services (IIS) on the Cloud Connector.
D. Configure Internet Information Services (IIS) on the StoreFront server to use HTTPS.

正解：A

解説：
Explanation
After configuring TLS certificates on Cloud Connectors and disabling HTTP connections, the administrator needs to change the transport type to HTTPS in the StoreFront store's Delivery Controller list to allow resource enumeration between on-premises StoreFront and Citrix Cloud4.

質問 # 84
A Citrix Administrator needs to confirm that all the client certificates presented to the authentication vServer are valid until year 2020.
Which expression can the administrator use to meet this requirement?

A. CLIENT.SSL.CLIENT_CERT.VALID_NOT_BEFORE.EQ(GMT2020)
B. CLIENT.SSL.CLIENT_CERT.DAYS_TO_EXPIRE.EQ(2020)
C. CLIENT.SSL.ORIGIN_SERVER_CERT.VALID_NOT_AFTER.EQ(GMT2020)
D. CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2020)

正解：D

解説：
Explanation
According to the Citrix Virtual Apps and Desktops 7 Deployment and Administration guide, the expression CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2020) checks whether the client certificate is valid until the specified date (GMT2020). The other expressions are either incorrect or irrelevant for this requirement.

質問 # 85
Which SQL permission is required to create a Virtual Apps and Desktops Site database through the Citrix Studio console?

A. setupadmin
B. dbcreator
C. sysadmin
D. serveradmin

正解：C

解説：
The sysadmin role is required to create and configure the Site, including creating databases and assigning permissions during initial site setup.

質問 # 86
A user calls the help desk and states that launching a pooled random desktop takes as long as five minutes.
Which Citrix Director report can a Citrix Administrator review to find out what might be causing the delay?

A. Logon Performance
B. Load Evaluators
C. Connection Failures
D. Resource Utilization

正解：A

質問 # 87
Scenario: A Citrix Administrator is configuring the Workspace Experience to provide users with access to their applications and desktops. The administrator deployed Microsoft Azure Active Directory (AD) already and wants to leverage it to support user access to the Workspace Experience.
Which two steps does the administrator need to take to enable users to authenticate using Azure AD to the Workspace Experience? (Choose two.)

A. Deploy Cloud Connectors to support Azure AD authentication.
B. Add Azure AD Account under Identity Providers in Citrix Cloud.
C. Enable Azure AD authentication under Workspace Configuration in Citrix Cloud.
D. Add Cloud Connector information to the Azure AD console.

正解：B、C

解説：
Explanation/Reference: https://docs.citrix.com/en-us/citrix-cloud/workspace-configuration.html#change-authentication-to- workspaces

質問 # 88
Scenario: A Citrix Administrator maintains a Citrix Virtual Apps and Desktops Site where mandatory profiles are being used for all users. Users need to maintain the different printer property settings that are available for their HDX sessions. The administrator has enabled the HDX Printer properties retention policy for the Site.
Which setting could the administrator use for this environment?

A. Retained in user profile only
B. Held in profile only if NOT saved on client
C. Do NOT retain printer properties
D. Saved on the client device only

正解：A

解説：
The HDX Printer properties retention policy has four possible settings:
Held in profile only if NOT saved on client: This is the default setting. The printer properties are held in the user profile only if they have not been saved on the user device. Do NOT retain printer properties: The printer properties are not retained at all. The user must configure them for each session.
Saved on the client device only: The printer properties are saved on the user device only. The user profile does not store them.
Retained in user profile only: The printer properties are retained in the user profile only. The user device does not store them.
In this scenario, the administrator wants the users to maintain the different printer property settings for their HDX sessions. Since the users are using mandatory profiles, which are read- only and do not save any changes, the administrator should use the Retained in user profile only setting. This way, the printer properties are stored in the user profile and applied to the HDX sessions. The user device does not need to save them. This setting is suitable for environments where mandatory profiles are being used.

質問 # 89
A user calls the help desk to report that when launching any application from within their published desktop session, it takes a long time and the overall performance is poor.
Which Citrix Director report can a Citrix Administrator use to initiate the investigation of the issue?

A. Session Data in Filters
B. Launch Failures in Trends
C. Load Evaluator in Trends
D. Machine Utilization in Machine Details

正解：D

解説：
The Machine Utilization report in the Machine Details page shows the CPU, memory, disk, and network usage of the selected machine over time1. This can help the Citrix Administrator identify any resource bottlenecks or spikes that may affect the performance of the applications launched from the published desktop session. The other reports do not provide information about the machine's resource utilization, but rather about the user's connection, session, and application launch failures2.
1: Machine utilization | Director - Citrix Product Documentation 2: Troubleshoot user issues | Director - Citrix Product Documentation

質問 # 90
......

1Y0-204試験問題集、1Y0-204練習テスト問題：https://www.jpntest.com/shiken/1Y0-204-mondaishu

無料1Y0-204試験問題集で合格させるお手軽に試験合格：https://drive.google.com/open?id=1o9JS8lG0OQf9H8H4WfVcYc6qIYddYCYV