[Q73-Q95] ベスト良質なCitrix 1Y0-204試験問題JPNTestリアル練習試験 [2024]

ベスト良質なCitrix 1Y0-204試験問題JPNTestリアル練習試験 [2024]

重要な試験問題でCitrix Virtual Apps and Desktops 7 Administration一発合格

質問 # 73
Which three database high availability features are supported for on-premises deployments of Citrix Virtual Apps and Desktops? (Choose three.)

A. Mirroring
B. Always On Availability Groups
C. Clustered Instances
D. Flashback
E. Automatic Storage Management

正解：A、B、C

解説：
Explanation/Reference:
Reference: https://docs.citrix.com/en-us/xenapp-and-xendesktop/7-15-ltsr/technical-overview/ databases.html#high-availability

質問 # 74
Scenario: A Citrix Administrator has configured a Citrix ADC active-passive high availability (HA) pair.
When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table.
What can the administrator configure to resolve this issue?

A. Virtual MAC
B. Route Monitor
C. HA monitor
D. Independent Network Configuration (INC) mode

正解：A

質問 # 75
Which Citrix ADC-owned IP address will send traffic from the Citrix ADC to NTP servers by default?

A. CLIP
B. SNIP
C. NSIP
D. VIP

正解：C

解説：
Explanation
The NSIP address is the NetScaler-owned IP address that uniquely identifies the NetScaler on your network, and it provides access to the appliance. By default, the NSIP is the source IP address for packets originating from the NetScaler appliance, such as packets destined for NTP servers1.
1: Configuring NetScaler-owned IP addresses | Networking

質問 # 76
A user calls the help desk to report that when launching any application from within their published desktop session, it takes a long time and the overall performance is poor.
Which Citrix Director report can a Citrix Administrator use to initiate the investigation of the issue?

A. Launch Failures in Trends
B. Machine Utilization in Machine Details
C. Session Data in Filters
D. Load Evaluator in Trends

正解：B

解説：
Explanation
The Machine Utilization report in the Machine Details page shows the CPU, memory, disk, and network usage of the selected machine over time1. This can help the Citrix Administrator identify any resource bottlenecks or spikes that may affect the performance of the applications launched from the published desktop session. The other reports do not provide information about the machine's resource utilization, but rather about the user's connection, session, and application launch failures2.
1: Machine utilization | Director - Citrix Product Documentation 2: Troubleshoot user issues | Director - Citrix Product Documentation

質問 # 77
Which method, according to Citrix leading practices, can a Citrix Administrator use to successfully make a configuration change for a StoreFront server group?

A. Make the same change on all StoreFront servers in the group using remote PowerShell commands.
B. Make the change on one StoreFront server in the group, then restart all servers in the group to synchronize the change.
C. Make the change on one StoreFront server in the group, then use the Propagate Changes feature.
D. Make the same change manually on all StoreFront servers in the group, then run a Site health check.

正解：C

解説：
Explanation/Reference:
https://www.carlstalhood.com/storefront-cr-basic-configuration/#secondserver

質問 # 78
Scenario: A Citrix Administrator of a large, multi-domain company needs to configure specific Group Policy Object (GPO) settings for Citrix Workspace app (Receiver) on managed endpoints that are in various locations. The administrator needs to have the ability to save the GPO template file to the Active Directory central store, so that Group Policy Administrators located in other domains can utilize it.
Which step should the administrator take to accomplish this task?

A. Use the available Receiver ADML template to configure the required settings locally.
B. Use the available Receiver ADMX and ADML template to configure the required settings locally.
C. Use the available Receiver ADML template to configure the required settings at the domain level.
D. Use the available Receiver ADMX and ADML template to configure the required settings at the domain level.

正解：D

質問 # 79
A Citrix Administrator is in the process of installing Citrix Cloud Connector, but the installation fails.
What could be causing the Citrix Cloud Connector installation to fail on the machine?

A. It is in sync with UTC time instead of local time.
B. Enhanced Security Configuration (ESC) is set to 'off'.
C. It is NOT joined to the domain.
D. It cannot run on a machine template cloned across multiple machines.

正解：C

質問 # 80
A Citrix Administrator needs to block access to multiple URLs for security reasons.
Which configuration should the administrator use to accomplish this requirement?

A. Option C
B. Option B
C. Option A
D. Option D

正解：B

解説：
Explanation
Option B is the correct answer because it uses the DROP action to block access to the URLs that match the BAD_URL pattern set. The other options use the RESET action, which only resets the connection but does not prevent access. Also, option C has a typo in the bind responder global command, which would cause an error.
Option D has an invalid type argument for the bind responder global command, which should be DNS_REQ_OVERRIDE instead of DNS_REQ. For more information, see the following resources:
* Manage | Citrix Virtual Apps and Desktops 7 2308
* Applications | Citrix Virtual Apps and Desktops 7 2308
* Citrix Virtual Apps and Desktops 7 Deployment and Administration (CWS ...
* CWS-215: Citrix Virtual Apps and Desktops 7 Deployment and ...
* EDUCATION CWS-215: Citrix Virtual Apps and Desktops 7 Administration On ...

質問 # 81
Which method, according to Citrix leading practices, can a Citrix Administrator use to successfully make a configuration change for a StoreFront server group?

A. Make the same change on all StoreFront servers in the group using remote PowerShell commands.
B. Make the change on one StoreFront server in the group, then restart all servers in the group to synchronize the change.
C. Make the change on one StoreFront server in the group, then use the Propagate Changes feature.
D. Make the same change manually on all StoreFront servers in the group, then run a Site health check.

正解：C

質問 # 82
Scenario: A Citrix Administrator maintains a Citrix Virtual Apps and Desktops Site with a number of network print servers being used for all users. Currently, the print serves use native Windows drivers. No client printers are being used. New company guidelines require a reduction in the number of native drivers being used within the Site infrastructure.
Which step can the administrator take to meet the new company guidelines?

A. Configure the Citrix Universal Generic Printer and update the Auto-create generic universal printer policy setting.
B. Install the Universal Print Server on all print servers in the Site and leave the default Universal printer driver usage policy setting.
C. Enable the Citrix Universal Print Driver (EMF) driver and leave the default Universal printer driver usage policy setting.
D. Install the Universal Print Server on all print servers in the Site and update the Universal printer usage policy setting.

正解：A

質問 # 83
What is the minimum permission a Citrix Administrator can grant to an IT manager to access Citrix Studio?

A. Host Administrator
B. Read Only Administrator
C. Machine Catalog Administrator
D. Delivery Group Administrator

正解：B

解説：
Explanation/Reference: https://docs.citrix.com/en-us/citrix-virtual-apps-desktops-service/manage-deployment/ delegated-administration.html

質問 # 84
Which method, according to Citrix leading practices, can a Citrix Administrator use to successfully make a configuration change for a StoreFront server group?

A. Make the same change on all StoreFront servers in the group using remote PowerShell commands.
B. Make the change on one StoreFront server in the group, then restart all servers in the group to synchronize the change.
C. Make the change on one StoreFront server in the group, then use the Propagate Changes feature.
D. Make the same change manually on all StoreFront servers in the group, then run a Site health check.

正解：C

解説：
Explanation
According to Citrix documentation, to make a configuration change for a StoreFront server group, the change should be made on one StoreFront server in the group, and then the Propagate Changes feature should be used to synchronize the change across the group1

質問 # 85
What happens to the differencing disk of a Random/Non-Persistent desktop machine following a restart in a Citrix Virtual Apps and Desktops Site running on Citrix Hypervisor?

A. It will be merged with the base image.
B. It will be updated from the base image.
C. It will be disconnected and recreated.
D. It will be synchronized with the attached Personal vDisk.

正解：B

質問 # 86
Scenario: A Citrix Administrator has configured the Citrix ADC as a DNS Proxy Server. The administrator executed the commands in the screenshot on the Citrix ADC using the command-line interface.
Click on the 'Exhibit' button to view the screenshot of the command-line interface.

What will be the effect of this configuration?

A. Set TC bit and rcode as NOERROR in the DNS Response from DNS server
B. Create a DNS Response with TC bit set and rcode as NOERROR
C. Create a DNS Request with TC bit set and rcode as NOERROR
D. Set TC bit and rcode as NOERROR in the DNS Request from Client

正解：B

質問 # 87
Scenario: A Citrix Administrator is configuring load balancing on a Citrix ADC appliance for the company web servers. The administrator needs to create a custom monitor that will look for a specific keyword response from the website and will be used to keep the services in an UP state.
Which type of monitor can the administrator create to accomplish this scenario?

A. An UDP-ECV monitor with the keyword in the Special Parameters - Receive String field.
B. HTTP-ECV monitor with the keyword in the Special Parameters - Receive String field.
C. A HTTP monitor with the keyword in the Special Parameters - Response Codes field.
D. A TCP monitor with the keyword in the Special Parameters - Response Code field.

正解：B

解説：
Explanation/Reference:
Reference: https://support.citrix.com/article/CTX209292ef

質問 # 88
What are three valid ways to configure Virtual Delivery Agent (VDA) registration? (Choose three.)

A. CONFIG.XML file
B. MCS-based PERSONALITY.INI
C. DHCP Options
D. Organizational Unit (OU) based Controller discovery
E. Group Policy Object (GPO)

正解：B、D、E

解説：
Explanation/Reference: https://docs.citrix.com/en-us/citrix-virtual-apps-desktops/manage-deployment/vda- registration.html

質問 # 89
A user calls the help desk to report that when launching any application from within their published desktop session, it takes a long time and the overall performance is poor.
Which Citrix Director report can a Citrix Administrator use to initiate the investigation of the issue?

A. Launch Failures in Trends
B. Machine Utilization in Machine Details
C. Session Data in Filters
D. Load Evaluator in Trends

正解：B

質問 # 90
A user calls the help desk and states that launching a pooled random desktop takes as long as five minutes.
Which Citrix Director report can a Citrix Administrator review to find out what might be causing the delay?

A. Logon Performance
B. Resource Utilization
C. Connection Failures
D. Load Evaluators

正解：A

質問 # 91
What information from the Citrix License Server does a Citrix Administrator need in order to allocate the Citrix Virtual Desktops license file from the Citrix.com account?

A. IP address
B. Hostname
C. FQDN
D. MAC address

正解：B

質問 # 92
Which layer can optionally be managed by Citrix Cloud, when designing Citrix Cloud architecture?

A. Hardware
B. Resource
C. Control
D. Access

正解：D

解説：
Explanation
The architecture Layer is the following:
User: represent the endpoints
Access: represent the storefront and Citrix Gateway
Control: represent the delivery controller, database, studio, license, director Resources: represent the VDAs Host: represent the hardware, fiscal server, storage, network, etc.
Page 33, 34 and 35from the hand
book:https://docs.citrix.com/en-us/xenapp-and-xendesktop/7-15-ltsr/downloads/handbook-715-ltsr.pdf

質問 # 93
When hosting Citrix Virtual Apps and Desktops on the Citrix Cloud platform, the ___________ Layer is always managed by Citrix. (Choose the correct option to complete the sentence.)

A. Control
B. Resource
C. User
D. Access

正解：A

解説：
Explanation
According to the Citrix Virtual Apps and Desktops service on Citrix Cloud documentation, the control layer is always managed by Citrix when hosting Citrix Virtual Apps and Desktops on the Citrix Cloud platform. The control layer consists of the Citrix Cloud Connector, Studio, Director, and other components that orchestrate the delivery of applications and desktops. The resource layer, which contains the VDAs, hypervisors, and storage, is managed by the customer or a service provider. The user layer, which contains the user profiles, policies, and data, is also managed by the customer or a service provider. The access layer, which contains the StoreFront and NetScaler Gateway components, can be either managed by Citrix or the customer, depending on the deployment scenario.

質問 # 94
Scenario: A Citrix Administrator configured Citrix ADC with multiple admin partitions, with different resources running one each. The administrator receives an SNMP alert stating 'a Load Balanced Virtual Server is down'. When the administrator checks the Citrix ADC, the resource on the partition that was usually managed is NOT there.
Now, the administrator has to check each partition to find the load balanced virtual server that is down.
What can the administrator do to add the partition information to the SNMP traps to avoid this from happening in the future?