リアルFortinet NSE7_SDW-7.0試験問題集には正解70問題と解答があります
有効なNSE7_SDW-7.0テスト解答とFortinet NSE7_SDW-7.0試験PDF問題を試そう
Fortinet NSE7_SDW-7.0 認定試験は、SD-WAN ソリューションを実装し管理することができる資格を持つ専門家を特定し、採用するために設計されています。候補者に SD-WAN ソリューションの知識や技能を実証することを求めることで、組織は自社の SD-WAN ソリューションを実装・管理できる正しい人材を確保できます。この認定試験は、ネットワークのパフォーマンスとセキュリティを向上させるために SD-WAN ソリューションを使用または計画している組織にとって最適です。
質問 # 24
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.
When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferred member in the matching SD-WAN rule.
Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?
- A. Disable allow-subnet-overlap under config system settings.
- B. Disable tcp-session-without-syn under config system settings.
- C. Enable snat-route-change under config system global.
- D. Enable auxiliary-session under config system settings.
正解：D
解説：
Controlling return path with auxiliary session When multiple incoming or outgoing interfaces are used in ECMP or for load balancing, changes to routing, incoming, or return traffic interfaces impacts how an existing sessions handles the traffic. Auxiliary sessions can be used to handle these changes to traffic patterns.https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/14295/controlling-return-path-with-auxiliary-session
質問 # 25
What are two benefits of using the Internet service database (ISDB) in an SD-WAN rule? (Choose two.)
- A. The ISDB is dynamically updated and reduces administrative overhead.
- B. The ISDB contains the IP addresses and port ranges of well-known internet services.
- C. The ISDB applies rules to traffic from specific sources, based on application type.
- D. The ISDB requires application control to maintain signatures and perform load balancing.
正解：A、B
質問 # 26
Which two statements are correct when traffic matches the implicit SD-WAN rule? (Choose two.)
- A. Traffic is load balanced using the algorithm set for the v4-ecmp-mode setting.
- B. Traffic does not match any of the entries in the policy route table.
- C. The sdwan_service_id flag in the session information is 0.
- D. All SD-WAN rules have the default setting enabled.
正解：B、C
質問 # 27 
Two hub-and-spoke groups are connected through a site-to-site IPsec VPN between Hub 1 and Hub 2. The administrator configured ADVPN on both hub-and-spoke groups.
Which two outcomes are expected if a user in Toronto sends traffic to London? (Choose two.)
- A. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
- B. London generates an IKE information message that contains the Toronto public IP address.
- C. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN.
- D. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
正解：C、D
質問 # 28
What does enabling the exchange-interface-ip setting enable FortiGate devices to exchange?
- A. The tunnel ID of their IPsec interfaces
- B. The gateway address of their IPsec interfaces
- C. The name of their IPsec interfaces
- D. The IP address of their IPsec interfaces
正解：D
質問 # 29 
Exhibit B -
Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.
Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an SD-WAN zone for port1 and port2?
- A. port2 is referenced in a static route.
- B. port1 is referenced in a firewall policy.
- C. port1 and port2 are not administratively down.
- D. port1 is assigned a manual IP address.
正解：B
質問 # 30
Which two interfaces are considered overlay links? (Choose two.)
- A. Physical
- B. IPsec
- C. GRE
- D. LAG
正解：B、C
質問 # 31
Refer to the exhibit.
Which configuration change is required if the responder FortiGate uses a dynamic routing protocol to exchange routes over IPsec?
- A. mode-cfg must be enabled.
- B. exchange-interface-ip must be enabled.
- C. type must be set to static.
- D. add-route must be disabled.
正解：D
解説：
for using "non ike" routes (for example BGP/static and so on) you must do disable the add-route that inject automatically kernel route based on p2 selectors from the remote site from the SD-WAN_7.2_Study_Guide page 236
質問 # 32
Refer to the exhibit, which shows the IPsec phase 1 configuration of a spoke.
What must you configure on the IPsec phase 1 configuration for ADVPN to work with SD-WAN?
- A. You must disable idle-timeout.
- B. You must enable auto-discovery-sender.
- C. You must enable net-device.
- D. You must set ike-version to 1.
正解：C
質問 # 33
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )
- A. An absolute SD-WAN rule was defined and matched traffic.
- B. The FIB lookup resolved interface was the SD-WAN interface.
- C. Matched traffic failed RPF and was caught by the rule.
- D. Traffic has matched none of the FortiGate policy routes.
正解：B、D
質問 # 34
Refer to the exhibit, which shows the IPsec phase 1 configuration of a spoke.
What must you configure on the IPsec phase 1 configuration for ADVPN to work with SD-WAN?
- A. You must disable idle-timeout.
- B. You must enable auto-discovery-sender.
- C. You must enable net-device.
- D. You must set ike-version to 1.
正解：C
質問 # 35
Which two performance SLA protocols enable you to verify that the server response contains a specific value?
(Choose two.)
- A. twamp
- B. dns
- C. icmp
- D. http
正解：B、D
質問 # 36
Which two statements about SD-WAN central management are true? (Choose two.)
- A. The objects are saved in the ADOM common object database.
- B. It uses templates to configure SD-WAN on managed devices.
- C. It supports normalized interfaces for SD-WAN member configuration.
- D. It does not support meta fields.
正解：A、B
解説：
Explanation
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-
質問 # 37
Refer to the exhibit.
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
- A. Firewall policy ID 1 has source NAT disabled.
- B. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
- C. Changes have been made on firewall policy ID 1 on FortiGate.
- D. FortiGate has terminated the session after a change on policy ID 1.
正解：C
質問 # 38
Refer to the exhibits.
Which two statements about the IPsec VPN configuration and the status of the IPsec VPN tunnel are true? (Choose two.)
- A. The phase 1 configuration supports the network-overlay setting.
- B. Dead peer detection is disabled.
- C. FortiGate does not install IPsec static routes for remote protected networks in the routing table.
- D. FortiGate facilitated the negotiation of the T_INET_1_0_0 ADVPN shortcut over T_INET_1_0.
正解：A、C
質問 # 39
Refer to the exhibit.
Which are two expected behaviors of the traffic that matches the traffic shaper? (Choose two.)
- A. The traffic shaper limits the combined bandwidth of all connections to a maximum of 5 MB/sec.
- B. The traffic shaper limits the bandwidth of each source IP address to a maximum of 625 KB/sec.
- C. The number of simultaneous connections among all source IP addresses cannot exceed five connections.
- D. The number of simultaneous connections allowed for each source IP address cannot exceed five connections.
正解：B、D
質問 # 40
Refer to the exhibit.
FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)
- A. Use different proposals are used between the interfaces.
- B. Use unique Diffie Hellman groups on each VPN interface.
- C. Configure the IKE mode to be aggressive mode.
- D. Specify a unique peer ID for each dial-up VPN interface.
正解：C、D
質問 # 41
Which two performance SLA protocols enable you to verify that the server response contains a specific value? (Choose two.)
- A. twamp
- B. dns
- C. icmp
- D. http
正解：B、D
解説：
Pages 85,86 in Study guide 7.0 Pages 100,101 in Study guide 7
質問 # 42
Which two statements about SD-WAN central management are true? (Choose two.)
- A. The objects are saved in the ADOM common object database.
- B. It uses templates to configure SD-WAN on managed devices.
- C. It supports normalized interfaces for SD-WAN member configuration.
- D. It does not support meta fields.
正解：A、B
解説：
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-fmg
質問 # 43
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit A shows an SD-WAN event log and exhibit B shows the member status and the SD-WAN rule configuration.
Based on the exhibits, which two statements are correct? (Choose two.)
- A. FortiGate updated the outgoing interface list on the rule so it prefers port2.
- B. SD-WAN rule ID 1 is set to lowest cost (SLA) mode.
- C. Port2 has the highest member priority.
- D. Port2 has a lower latency than port1.
正解：A、D
質問 # 44
Which two statements about SLA targets and SD-WAN rules are true? (Choose two.)
- A. SLA targets are used only by SD-WAN rules that are configured with Lowest Cost (SLA) or Maximize Bandwidth (SLA) as strategy.
- B. SD-WAN rules use SLA targets to check if the preferred members meet the SLA requirements.
- C. Member metrics are measured only if an SLA target is configured.
- D. When configuring an SD-WAN rule, you can select multiple SLA targets of the same performance SLA.
正解：A、B
質問 # 45
Refer to the exhibit.
Based on the exhibit, which two statements are correct about the health of the selected members? (Choose two.)
- A. FortiGate passively monitors the member if TCP traffic is passing through the member.
- B. During passive monitoring, FortiGate can't detect dead members.
- C. FortiGate can offload the traffic that is subject to passive monitoring to hardware.
- D. After FortiGate switches to active mode, FortiGate never fails back to passive monitoring.
正解：A、B
質問 # 46
Refer to the exhibit.
In a dual-hub hub-and-spoke SD-WAN deployment, which is a benefit of disabling the anti-replay setting on the hubs?
- A. It instructs the hub to disable TCP sequence number check, which is required for TCP sessions originated from spokes to fail over back and forth between the hubs.
- B. It instructs the hub to not check the ESP sequence numbers on IPsec traffic, to improve performance.
- C. It instructs the hub to skip content inspection on TCP traffic, to improve performance.
- D. It instructs the hub to disable the reordering of TCP packets on behalf of the receiver, to improve performance.
正解：A
質問 # 47 
Which two conclusions for traffic that matches the traffic shaper are true? (Choose two.)
- A. The measured bandwidth is less than 100 KBps.
- B. The traffic shaper drops packets if the bandwidth exceeds 6250 KBps.
- C. The traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps.
- D. The traffic shaper drops packets if the bandwidth is less than 2500 KBps.
正解：A、B
質問 # 48
......
Fortinet NSE7_SDW-7.0 認定試験は、世界的に認知されており、Fortinet SD-WAN 技術を使用する組織にとって高く評価されています。この認定は、候補者がFortinetの技術を使用して安全なSD-WANソリューションを設計、実装するために必要なスキルと知識を持っていることを証明します。
NSE7_SDW-7.0試験問題と有効なNSE7_SDW-7.0問題集でPDF：https://www.jpntest.com/shiken/NSE7_SDW-7.0-mondaishu
Fortinet NSE7_SDW-7.0認定リアル2023年最新の模擬試験：https://drive.google.com/open?id=1_4bgz1-loGxJRWxOGknLqPNGBqvs8A_w