2024年最新の実際に出ると確認された 無料Fortinet NSE7_SDW-7.0試験問題
NSE7_SDW-7.0リアル試験問題解答は無料
Fortinet NSE7_SDW-7.0試験は、ネットワークセキュリティの分野で働いており、組織のSD-WANインフラストラクチャの設計、実装、または管理を担当する専門家を対象としています。この厳密な試験は、候補者が、ますます複雑で動的な環境でネットワークを安全に安全に保つために必要な知識と実践的なスキルを確保するように設計されています。業界に標準を提供し、組織が安全で信頼できるSD-WANネットワークの構築と維持を支援できる資格のあるセキュリティ担当者にアクセスできるようにするのに役立ちます。
Fortinet NSE7_SDW-7.0（Fortinet NSE 7-SD-WAN 7.0）認定試験は、Fortinetinetを使用してソフトウェア定義の広エリアネットワーク（SD-WAN）の実装と管理において知識とスキルを検証したいITプロフェッショナル向けに設計された認定プログラムです。テクノロジー。認定試験の目的は、候補者がFortinet SD-WANソリューションを設計、展開、構成、およびトラブルシューティングする能力を評価して、最新のエンタープライズネットワークのニーズを満たすことを評価することです。
Fortinet NSE7_SDW-7.0試験は、ソフトウェア定義の広い領域ネットワーキング（SD-WAN）のドメインにおけるネットワークセキュリティの専門家の知識とスキルをテストするように設計されています。ますます多くの組織がSD-WANソリューションの実装に向けて動くにつれて、潜在的なサイバーの脅威からネットワークを保護するのに役立つセキュリティ専門家の必要性が高まっています。 NSE7_SDW-7.0試験は、業界で最も認知され、尊敬される認定の1つであり、最新のSD-WANセキュリティテクノロジーとベストプラクティスに関する候補者の知識に関する包括的な評価を提供します。
質問 # 14
Refer to the exhibit.
FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)
- A. Configure the IKE mode to be aggressive mode.
- B. Use unique Diffie Hellman groups on each VPN interface.
- C. Specify a unique peer ID for each dial-up VPN interface.
- D. Use different proposals are used between the interfaces.
正解：A、C
質問 # 15
Which two statements describe how IPsec phase 1 main mode is different from aggressive mode when performing IKE negotiation? (Choose two )
- A. The use of Diffie Hellman keys is limited by the responder and needs initiator acceptance.
- B. A total of six packets are exchanged between an initiator and a responder instead of three packets.
- C. XAuth is enabled as an additional level of authentication, which requires a username and password.
- D. A peer ID is included in the first packet from the initiator, along with suggested security policies.
正解：B、C
質問 # 16
Refer to the exhibits.
Two hub-and-spoke groups are connected through a site-to-site IPsec VPN between Hub 1 and Hub 2. The administrator configured ADVPN on both hub-and-spoke groups.
Which two outcomes are expected if a user in Toronto sends traffic to London? (Choose two.)
- A. London generates an IKE information message that contains the Toronto public IP address.
- B. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
- C. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN.
- D. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
正解：C、D
質問 # 17
Refer to the exhibit.
Which conclusion about the packet debug flow output is correct?
- A. The reply traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.
- B. The original traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.
- C. The original traffic exceeded the maximum bandwidth of the outgoing interface, and the packet was dropped.
- D. The original traffic exceeded the maximum packets per second of the outgoing interface, and the packet was dropped.
正解：B
質問 # 18
Refer to the exhibits.
An administrator is testing application steering in SD-WAN. Before generating test traffic, the administrator collected the information shown in exhibit A.
After generating GoToMeeting test traffic, the administrator examined the respective traffic log on FortiAnalyzer, which is shown in exhibit B.
The administrator noticed that the traffic matched the implicit SD-WAN rule, but they expected the traffic to match rule ID 1.
Which two reasons explain why the traffic matched the implicit SD-WAN rule? (Choose two.)
- A. Port1 and port2 do not have a valid route to the destination.
- B. The session 3-tuple did not match any of the existing entries in the ISDB application cache.
- C. Full SSL inspection is not enabled on the matching firewall policy.
- D. FortiGate did not refresh the routing information on the session after the application was detected.
正解：C、D
質問 # 19
Refer to the exhibit, which shows the IPsec phase 1 configuration of a spoke.
What must you configure on the IPsec phase 1 configuration for ADVPN to work with SD-WAN?
- A. You must enable net-device.
- B. You must disable idle-timeout.
- C. You must enable auto-discovery-sender.
- D. You must set ike-version to 1.
正解：A
質問 # 20
Refer to the exhibit.
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
- A. FortiGate has terminated the session after a change on policy ID 1.
- B. Changes have been made on firewall policy ID 1 on FortiGate.
- C. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
- D. Firewall policy ID 1 has source NAT disabled.
正解：B
質問 # 21
Which components make up the secure SD-WAN solution?
- A. Telephone, ISDN, and telecom network.
- B. Application, antivirus, and URL, and SSL inspection
- C. Datacenter, branch offices, and public cloud
- D. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
正解：D
質問 # 22
Refer to the exhibit.
Which configuration change is required if the responder FortiGate uses a dynamic routing protocol to exchange routes over IPsec?
- A. exchange-interface-ip must be enabled.
- B. add-route must be disabled.
- C. type must be set to static.
- D. mode-cfg must be enabled.
正解：B
解説：
Explanation
for using "non ike" routes (for example BGP/static and so on) you must do disable the add-route that inject automatically kernel route based on p2 selectors from the remote site from the SD-WAN_7.2_Study_Guide page 236
質問 # 23
Refer to the exhibits.
Exhibit B -
Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.
Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an SD-WAN zone for port1 and port2?
- A. port2 is referenced in a static route.
- B. port1 and port2 are not administratively down.
- C. port1 is referenced in a firewall policy.
- D. port1 is assigned a manual IP address.
正解：C
質問 # 24
Which two statements about SD-WAN central management are true? (Choose two.)
- A. It uses templates to configure SD-WAN on managed devices.
- B. The objects are saved in the ADOM common object database.
- C. It supports normalized interfaces for SD-WAN member configuration.
- D. It does not support meta fields.
正解：A、B
解説：
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-fmg
質問 # 25
Which two interfaces are considered overlay links? (Choose two.)
- A. Physical
- B. IPsec
- C. GRE
- D. LAG
正解：B、C
質問 # 26
Which SD-WAN setting enables FortiGate to delay the recovery of ADVPN shortcuts?
- A. hold-down-time
- B. idle-timeout
- C. link-down-failover
- D. auto-discovery-shortcuts
正解：A
質問 # 27
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows the traffic shaping policy and exhibit B shows the firewall policy.
The administrator wants FortiGate to limit the bandwidth used by YouTube. When testing, the administrator determines that FortiGate does not apply traffic shaping on YouTube traffic.
Based on the policies shown in the exhibits, what configuration change must be made so FortiGate performs traffic shaping on YouTube traffic?
- A. Web filtering must be enabled on the firewall policy.
- B. Application control must be enabled on the firewall policy.
- C. Individual SD-WAN members must be selected as the outgoing interface on the traffic shaping policy.
- D. Destination internet service must be enabled on the traffic shaping policy.
正解：B
質問 # 28
Refer to the exhibits.
Exhibit A
Exhibit B -
Exhibit A shows the configuration for an SD-WAN rule and exhibit B shows the respective rule status, the routing table, and the member status.
The administrator wants to understand the expected behavior for traffic matching the SD-WAN rule.
Based on the exhibits, what can the administrator expect for traffic matching the SD-WAN rule?
- A. The traffic will be routed over T_MPLS_0.
- B. The traffic will be load balanced across all three overlays.
- C. The traffic will be routed over T_INET_1_0.
- D. The traffic will be routed over T_INET_0_0.
正解：A
質問 # 29
Refer to the exhibit.
In a dual-hub hub-and-spoke SD-WAN deployment, which is a benefit of disabling the anti-replay setting on the hubs?
- A. It instructs the hub to disable TCP sequence number check, which is required for TCP sessions originated from spokes to fail over back and forth between the hubs.
- B. It instructs the hub to skip content inspection on TCP traffic, to improve performance.
- C. It instructs the hub to disable the reordering of TCP packets on behalf of the receiver, to improve performance.
- D. It instructs the hub to not check the ESP sequence numbers on IPsec traffic, to improve performance.
正解：A
質問 # 30
Which CLI command do you use to perform real-time troubleshooting for ADVPN negotiation?
- A. get router info routing-table all
- B. diagnose vpn tunnel list
- C. get ipsec tunnel list
- D. diagnose debug application ike
正解：D
質問 # 31
Which two statements are correct when traffic matches the implicit SD-WAN rule? (Choose two.)
- A. All SD-WAN rules have the default setting enabled.
- B. Traffic is load balanced using the algorithm set for the v4-ecmp-mode setting.
- C. The sdwan_service_id flag in the session information is 0.
- D. Traffic does not match any of the entries in the policy route table.
正解：C、D
質問 # 32
Which diagnostic command can you use to show the member utilization statistics measured by performance SLAs for the last 10 minutes?
- A. diagnose sys sdwan sla-log
- B. diagnose sys sdwan log
- C. diagnose sys sdwan intf-sla-log
- D. diagnose sys sdwan health-check
正解：A
解説：
SD-WAN 7.2 Study Guide page 321 You can view the stored member metrics by running the diagnose sys sdwan sla-log command. Note that you must include the name of the performance SLA followed by the member configuration index number. To display the SLA logs per interface, you run the diagnose sys sdwan intf-sla-log command.
質問 # 33
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process?
(Choose two.)
- A. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
- B. The zero-touch provisioning process has completed internally, behind FortiGate.
- C. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
- D. The FortiGate cloud key has not been added to the FortiGate cloud portal.
- E. A factory reset performed on FortiGate.
正解：B、D
質問 # 34
Refer to the exhibit.
Based on the output, which two conclusions are true? (Choose two.)
- A. The all_rules rule represents the implicit SD-WAN rule.
- B. Entry 1(id=1) is a regular policy route.
- C. There is more than one SD-WAN rule configured.
- D. The SD-WAN rules take precedence over regular policy routes.
正解：B、C
質問 # 35
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)
- A. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
- B. The zero-touch provisioning process has completed internally, behind FortiGate.
- C. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
- D. The FortiGate cloud key has not been added to the FortiGate cloud portal.
- E. A factory reset performed on FortiGate.
正解：B、D
質問 # 36
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.
When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferred member in the matching SD-WAN rule.
Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?
- A. Enable auxiliary-session under config system settings.
- B. Disable tcp-session-without-syn under config system settings.
- C. Enable snat-route-change under config system global.
- D. Disable allow-subnet-overlap under config system settings.
正解：A
解説：
Controlling return path with auxiliary session When multiple incoming or outgoing interfaces are used in ECMP or for load balancing, changes to routing, incoming, or return traffic interfaces impacts how an existing sessions handles the traffic. Auxiliary sessions can be used to handle these changes to traffic patterns.https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/14295/controlling-return-path-with-auxiliary-session
質問 # 37
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SD-WAN member status, the routing table, and the performance SLA status.
If port2 is detected dead by FortiGate, what is the expected behavior?
- A. Host 8.8.8.8 is reachable through port1 and port2.
- B. Port2 becomes alive after three successful probes are detected.
- C. FortiGate removes all static routes for port2.
- D. The administrator manually restores the static routes for port2, if port2 becomes alive.
正解：C
解説：
Explanation
This is due to Update static route is enable which removes the static route entry referencing the interface if the interface is dead
質問 # 38
......
試験問題集でNSE7_SDW-7.0練習無料最新のFortinet練習テスト：https://www.jpntest.com/shiken/NSE7_SDW-7.0-mondaishu
NSE7_SDW-7.0試験問題、リアルNSE7_SDW-7.0練習問題集：https://drive.google.com/open?id=172oaJ4XjSQ_EvlvvtvYz9uSFDFPkVVAM