[2024年更新]合格できるFortinet NSE7_SDW-7.0プレミアム資料テストエンジンPDFの無料問題集お試しセット [Q42-Q57]

[2024年更新]合格できるFortinet NSE7_SDW-7.0プレミアム資料テストエンジンPDFの無料問題集お試しセット

2024年最新のリアルNSE7_SDW-7.0問題集テストエンジン試験問題はここにある

Fortinet NSE7_SDW-7.0試験は、SD-WAN技術に携わるネットワークセキュリティ専門家にとって重要な認証です。この試験は、この分野のスキルと専門知識を有する候補者の能力を検証し、雇用主が従業員の知識とスキルを正確に評価するための信頼性のある方法を提供することを目的としています。NSE7_SDW-7.0試験に合格した候補者は、SD-WAN技術の専門家として認められ、この急速に進化する分野でのキャリアアップに有利な立場にあります。

FortinetのNSE7_SDW-7.0認定試験は、ITプロフェッショナルのSD-WANソリューションに関する知識とスキルを検証するために設計されています。ネットワークエンジニア、セキュリティ管理者、SD-WANソリューションを組織で導入および管理する責任を負う他の専門家を対象としています。試験内容は、アーキテクチャ、導入、セキュリティ、およびトラブルシューティングに関するSD-WANに関するさまざまなトピックをカバーしています。

Fortinet NSE7_SDW-7.0試験は、SD-WAN技術に関連するトピックについて、SD-WANソリューションの設計と展開、トラフィックのセキュリティと最適化、およびネットワークの問題のトラブルシューティングをカバーしています。この試験は、SD-WANソリューションの実装と管理に責任を持つネットワークエンジニア、セキュリティプロフェッショナル、およびITマネージャーを対象としています。

質問 # 42
Refer to the exhibit.

The exhibit shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured latency will make T_MPLS_0 the new preferred member?

A. When T_MPLS_0 has a latency of 100 ms.
B. When T_N1PLS_0 has a latency of 80 ms.
C. When T_INET_0_0 has a latency of 250 ms.
D. When T_INET_0_0 and T_MPLS_0 have the same latency.

正解：B

質問 # 43
Refer to the exhibit.

Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)

A. Set priority 10.
B. Set load-balance-mode source-ip-ip-based.
C. Set cost 15.
D. Set source 100.64.1.1.

正解：A、C

質問 # 44
Refer to the exhibits.
Exhibit A

Exhibit B -

Exhibit A shows the configuration for an SD-WAN rule and exhibit B shows the respective rule status, the routing table, and the member status.
The administrator wants to understand the expected behavior for traffic matching the SD-WAN rule.
Based on the exhibits, what can the administrator expect for traffic matching the SD-WAN rule?

A. The traffic will be routed over T_INET_0_0.
B. The traffic will be routed over T_INET_1_0.
C. The traffic will be load balanced across all three overlays.
D. The traffic will be routed over T_MPLS_0.

正解：D

質問 # 45
Which two statements about SD-WAN central management are true? (Choose two.)

A. It supports normalized interfaces for SD-WAN member configuration.
B. The objects are saved in the ADOM common object database.
C. It uses templates to configure SD-WAN on managed devices.
D. It does not support meta fields.

正解：B、C

解説：
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-fmg

質問 # 46
Refer to the exhibits.

An administrator is testing application steering in SD-WAN. Before generating test traffic, the administrator collected the information shown in exhibit A.
After generating GoToMeeting test traffic, the administrator examined the respective traffic log on FortiAnalyzer, which is shown in exhibit B.
The administrator noticed that the traffic matched the implicit SD-WAN rule, but they expected the traffic to match rule ID 1.
Which two reasons explain why the traffic matched the implicit SD-WAN rule? (Choose two.)

A. FortiGate did not refresh the routing information on the session after the application was detected.
B. Full SSL inspection is not enabled on the matching firewall policy.
C. Port1 and port2 do not have a valid route to the destination.
D. The session 3-tuple did not match any of the existing entries in the ISDB application cache.

正解：A、B

質問 # 47
Refer to the exhibit.

Which statement explains the output shown in the exhibit?

A. FortiGate performed standard FIB routing on the session.
B. FortiGate used 192.2.0.1 as the gateway for the original direction of the traffic.
C. FortiGate must re-evaluate the session due to routing change.
D. FortiGate will not re-evaluate the session following a firewall policy change.

正解：C

質問 # 48
Refer to the exhibits.
Exhibit A -

Exhibit B -

Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.
When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferred member in the matching SD-WAN rule.
Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?

A. Enable auxiliary-session under config system settings.
B. Enable snat-route-change under config system global.
C. Disable allow-subnet-overlap under config system settings.
D. Disable tcp-session-without-syn under config system settings.

正解：A

解説：
Controlling return path with auxiliary session When multiple incoming or outgoing interfaces are used in ECMP or for load balancing, changes to routing, incoming, or return traffic interfaces impacts how an existing sessions handles the traffic. Auxiliary sessions can be used to handle these changes to traffic patterns.https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/14295/controlling-return-path-with-auxiliary-session

質問 # 49
Refer to the exhibit.

Based on the exhibit, which action does FortiGate take?

A. FortiGate bounces port5 after it detects all SD-WAN members as dead.
B. FortiGate brings up port5 after it detects all SD-WAN members as alive.
C. FortiGate brings down port5 after it detects all SD-WAN members as dead.
D. FortiGate fails over to the secondary device after it detects all SD-WAN members as dead.

正解：D

質問 # 50
Refer to the exhibit.

The exhibit shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured packet loss will make T_INET_1_0 the new preferred member?

A. When T_INET_0_0 has 12% packet loss.
B. When T_INET_0_0 has 4% packet loss.
C. When T_INET_1_0 has 4% packet loss.
D. When all three members have the same packet loss.

正解：D

質問 # 51
Refer to the exhibits.
Exhibit A -

Exhibit B -

Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SD-WAN member status, the routing table, and the performance SLA status.
If port2 is detected dead by FortiGate, what is the expected behavior?

A. Host 8.8.8.8 is reachable through port1 and port2.
B. The administrator manually restores the static routes for port2, if port2 becomes alive.
C. FortiGate removes all static routes for port2.
D. Port2 becomes alive after three successful probes are detected.

正解：C

解説：
Explanation
This is due to Update static route is enable which removes the static route entry referencing the interface if the interface is dead

質問 # 52
Refer to the exhibit.

Which configuration change is required if the responder FortiGate uses a dynamic routing protocol to exchange routes over IPsec?

A. mode-cfg must be enabled.
B. add-route must be disabled.
C. exchange-interface-ip must be enabled.
D. type must be set to static.

正解：B

解説：
for using "non ike" routes (for example BGP/static and so on) you must do disable the add-route that inject automatically kernel route based on p2 selectors from the remote site from the SD-WAN_7.2_Study_Guide page 236

質問 # 53
Which diagnostic command can you use to show the configured SD-WAN zones and their assigned members?

A. diagnose sys sdwan member
B. diagnose sys sdwan service
C. diagnose sys sdwan zone
D. diagnose sys sdwan interface

正解：C

質問 # 54

Two hub-and-spoke groups are connected through a site-to-site IPsec VPN between Hub 1 and Hub 2. The administrator configured ADVPN on both hub-and-spoke groups.
Which two outcomes are expected if a user in Toronto sends traffic to London? (Choose two.)

A. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN.
B. London generates an IKE information message that contains the Toronto public IP address.
C. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
D. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.

正解：A、C

質問 # 55
Refer to the exhibit.

Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?

A. Changes have been made on firewall policy ID 1 on FortiGate.
B. Firewall policy ID 1 has source NAT disabled.
C. FortiGate has terminated the session after a change on policy ID 1.
D. The type of traffic defined and allowed on firewall policy ID 1 is UDP.

正解：A

質問 # 56
Refer to the exhibit.

Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)