合格させるCheckPoint 156-315.81にはJPNTest提供の試験問題集で2024年11月更新 [Q360-Q378]

合格させるCheckPoint 156-315.81にはJPNTest提供の試験問題集で2024年11月更新

完全版最新の156-315.81問題集、100%カバー率問題と解答があなたをリアル試験で合格させる

チェックポイント156-315.81試験としても知られるチェックポイント認定セキュリティエキスパート（CCSE）R81認定試験は、チェックポイントセキュリティソリューションの管理と構成のスキルを証明したいセキュリティ専門家向けに設計されています。この認定試験では、セキュリティポリシー、ネットワークセキュリティ、VPNS、および高度なトラブルシューティング手法に関する候補者の知識をテストします。 CCSE R81認証は、チェックポイントセキュリティソリューションを使用してエンタープライズネットワークを保護することに関する個人の専門知識を示す貴重な資格情報です。

質問 # 360
What is the SandBlast Agent designed to do?

A. Performs OS-level sandboxing for SandBlast Cloud architecture
B. Ensure the Check Point SandBlast services is running on the end user's system
C. If malware enters an end user's system, the SandBlast Agent prevents the malware from spreading with the network
D. Clean up email sent with malicious attachments

正解：C

質問 # 361
GAIA greatly increases operational efficiency by offering an advanced and intuitive software update agent, commonly referred to as the:

A. Check Point Software Update Agent
B. Check Point Remote Installation Daemon (CPRID)
C. Check Point Software Update Daemon
D. Check Point Update Service Engine

正解：D

質問 # 362
Fill in the blanks: Gaia can be configured using the ______ or _____ .

A. WebUI; Gaia Interface
B. Command line interface; WebUI
C. GaiaUI; command line interface
D. Gaia Interface; GaiaUI

正解：B

質問 # 363
Which of the following is a task of the CPD process?

A. Invoke and monitor critical processes and attempts to restart them if they fail
B. Responsible for processing most traffic on a security gateway
C. Log forwarding
D. Transfers messages between Firewall processes

正解：D

解説：
https://sc1.checkpoint.com/documents/R76/CP_R76_CLI_WebAdmin/12496.htm

質問 # 364
Which of these statements describes the Check Point ThreatCloud?

A. A worldwide collaborative security network
B. Prevents Cloud vulnerability exploits
C. Blocks or limits usage of web applications
D. Prevents or controls access to web sites based on category

正解：A

解説：
Explanation
The Check Point ThreatCloud is a worldwide collaborative security network that collects and analyzes threat data from millions of sensors, security gateways, and other sources, and delivers real-time threat intelligence and protection to Check Point products. References: Check Point ThreatCloud

質問 # 365
What technologies are used to deny or permit network traffic?

A. Firewall Blade, URL/Application Blade, and IPS
B. Stateful Inspection, Firewall Blade, and URL/Application Blade
C. Packet Filtering, Stateful Inspection, and Application Layer Firewall
D. Stateful Inspection, URL/Application Blade, and Threat Prevention

正解：C

解説：
Packet filtering, stateful inspection, and application layer firewall are technologies used to deny or permit network traffic based on different criteria. Packet filtering is a basic firewall technology that examines the header of each packet and compares it to a set of rules to decide whether to allow or drop it. Stateful inspection is an advanced firewall technology that tracks the state and context of each connection and applies security rules based on the connection information. Application layer firewall is a firewall technology that inspects the content and behavior of applications and protocols at the application layer of the OSI model and enforces granular policies based on the application identity, user identity, and content type. Reference: Check Point R81 Firewall Administration Guide, page 9-10

質問 # 366
Which of the following is NOT a valid type of SecureXL template?

A. Accept Template
B. Drop Template
C. Deny template
D. NAT Template

正解：C

解説：
The type of SecureXL template that is not valid among the options is Deny template. SecureXL templates are pre-allocated data structures that store information about connections that match certain criteria. They are used to accelerate the processing of packets that belong to those connections. The valid types of SecureXL templates are Accept, Drop, NAT, and Crypt. The Accept template is used for connections that are allowed by the Firewall policy. The Drop template is used for connections that are blocked by the Firewall policy. The NAT template is used for connections that require Network Address Translation. The Crypt template is used for connections that require encryption or decryption. Reference: [SecureXL Templates]

質問 # 367
What will be the effect of running the following command on the Security Management Server?

A. No effect.
B. Reset SIC on all gateways.
C. Remove the local ACL lists.
D. Remove the installed Security Policy.

正解：D

質問 # 368
Name the file that is an electronically signed file used by Check Point to translate the features in the license into a code?

A. cp.macro
B. Both License (.lic) and Contract (.xml) files
C. Contract file (.xml)
D. license File (.lic)

正解：A

解説：
Explanation
cp.macro is an electronically signed file used by Check Point to translate the features in the license into a code. It is located in the $FWDIR/conf directory on the Security Management Server. The cp.macro file contains a list of features and their corresponding codes, which are used to generate the license file (.lic) based on the contract file (.xml). The license file (.lic) is then installed on the Security Gateway or Security Management Server to activate the licensed features. References: Check Point R81 Licensing and Contract Administration Guide, page 10

質問 # 369
Rugged appliances are small appliances with ruggedized hardware and like Quantum Spark appliance they use which operating system?

A. Centos Linux
B. Gaia embedded.
C. Gaia
D. Red Hat Enterprise Linux version 5

正解：B

解説：
Explanation
Rugged appliances are small appliances with ruggedized hardware that are designed for harsh environments.
Like Quantum Spark appliances, they use Gaia embedded as their operating system. Gaia embedded is a lightweight version of Gaia that supports a subset of features and commands. References: [Check Point R81 Gaia Embedded Administration Guide]

質問 # 370
What are the methods of SandBlast Threat Emulation deployment?

A. Cloud, OpenServer and Vmware
B. Cloud, Smart-1 and Hybrid
C. Cloud, Appliance and Hybrid
D. Cloud, Appliance and Private

正解：D

解説：
Explanation
The methods of SandBlast Threat Emulation deployment are Cloud, Appliance, and Private. SandBlast Threat Emulation is a solution that detects and prevents zero-day attacks by emulating files in a sandbox environment and analyzing their behavior for malicious indicators. SandBlast Threat Emulation can be deployed in three different methods: Cloud, Appliance, and Private. Cloud method is when the files are sent to the Check Point cloud service for emulation and analysis. This method does not require any additional hardware or software on the customer's side, and provides the fastest updates and feeds from ThreatCloud. Appliance method is when the files are sent to a dedicated appliance on the customer's network for emulation and analysis. This method provides more control and privacy for the customer, and supports more file types and sizes. Private method is when the files are sent to a private cloud service on the customer's network for emulation and analysis. This method provides the highest level of control and privacy for the customer, and supports customizing the emulation environment and scenarios.

質問 # 371
In R81, where do you manage your Mobile Access Policy?

A. From the Dedicated Mobility Tab
B. Shared Gateways Policy
C. Through the Mobile Console
D. Access Control Policy

正解：C

解説：
Explanation
In R81, you manage your Mobile Access Policy from the Mobile Console. The Mobile Console is a separate web-based interface that allows you to configure and monitor Mobile Access features, such as VPN, portal, applications, users, devices, and certificates. The Mobile Console can be accessed from any browser by entering https://<Management_Server_IP>/mobileconsole. References: [Mobile Console]

質問 # 372
Fill in the blank: __________ information is included in "Full Log" tracking option, but is not included in
"Log" tracking option?

A. Application
B. Destination port
C. File attributes
D. Data type

正解：D

質問 # 373
Which component is NOT required to communicate with the Web Services API?

A. session ID token
B. Request payload
C. content-type
D. API key

正解：D

解説：
Explanation
The component that is not required to communicate with the Web Services API is the API key. The Web Services API uses a session ID token for authentication, which is obtained by sending a login request with a valid username and password. The other components are required for sending requests and receiving responses from the Web Services API. The content-type specifies the format of the data being sent or received, such as JSON or XML. The request payload contains the data and parameters for the API call, such as command name, object name, etc. References: [Web Services API Reference Guide]

質問 # 374
To fully enable Dynamic Dispatcher with Firewall Priority Queues on a Security Gateway, run the following command in Expert mode then reboot:

A. fw ctl Dynamic_Priority_Queue on
B. fw ctl Dynamic_Priority_Queue enable
C. fw ctl multik set_mode 9
D. fw ctl multik set_mode 1

正解：C

解説：
Dynamic Dispatcher is a feature that optimizes the performance of Security Gateways with multiple CPU cores by dynamically allocating traffic to different cores based on their load and priority. Firewall Priority Queues is a feature that prioritizes traffic based on its type and importance by assigning it to different queues with different weights and limits. To fully enable Dynamic Dispatcher with Firewall Priority Queues on a Security Gateway, you need to run the following command in Expert mode then reboot:

This command sets the multi-core mode to 9, which means that Dynamic Dispatcher is enabled with Firewall Priority Queues. The other commands are not valid or do not enable both features. Reference: R81 Performance Tuning Administration Guide

質問 # 375
From SecureXL perspective, what are the tree paths of traffic flow:

A. Initial Path; Medium Path; Accelerated Path
B. Layer Path; Blade Path; Rule Path
C. Firewall Path; Accept Path; Drop Path
D. Firewall Path; Accelerated Path; Medium Path

正解：D

解説：
SecureXL is a technology that improves the performance of Security Gateway by offloading the processing of some packets from the Firewall kernel to the SecureXL device driver1. SecureXL can handle packets in three different paths, depending on the type and state of the packet2:
Firewall Path: This is the slowest path, where packets are processed by the Firewall kernel and all the inspection blades. This path is used for packets that require full inspection, such as the first packet of a connection, packets that match a rule with a UTM blade, or packets that are not eligible for acceleration.
Accelerated Path: This is the fastest path, where packets are processed by the SecureXL device driver and bypass the Firewall kernel. This path is used for packets that belong to an established connection that is marked for acceleration, and do not require any further inspection by the Firewall or other blades.
Medium Path: This is a hybrid path, where packets are processed by both the SecureXL device driver and the Firewall kernel, but skip some inspection steps. This path is used for packets that belong to an established connection that is not marked for acceleration, but do not require full inspection by all the blades.
The other options are not correct because:
A) Initial Path; Medium Path; Accelerated Path: There is no such thing as Initial Path in SecureXL terminology. The initial packet of a connection is always handled by the Firewall Path.
B) Layer Path; Blade Path; Rule Path: These are not paths of traffic flow, but components of the unified policy in R80 and above versions. The Layer Path refers to the order of layers in the policy, the Blade Path refers to the order of blades within a layer, and the Rule Path refers to the order of rules within a blade3.
C) Firewall Path; Accept Path; Drop Path: These are not paths of traffic flow, but possible actions that the Firewall can take on a packet. The Firewall Path is one of the paths of traffic flow, but the Accept Path and Drop Path are not. The Accept Path means that the packet is allowed to pass through the Firewall, and the Drop Path means that the packet is blocked by the Firewall4.

質問 # 376
What must you do first if "fwm sic_reset" could not be completed?

A. Reset SIC from Smart Dashboard
B. Change internal CA via cpconfig
C. Reinitialize SIC on the security gateway then run "fw unloadlocal"
D. Cpstop then find keyword "certificate" in objects_5_0.C and delete the section

正解：B

解説：
Explanation
The first thing that must be done if "fwm sic_reset" could not be completed is to change internal CA via cpconfig. Fwm sic_reset is a command that allows administrators to reset Secure Internal Communication (SIC) between Security Management Server and Security Gateways or other Check Point modules. SIC is a mechanism that ensures secure and authenticated communication between Check Point components by using certificates issued by an internal Certificate Authority (ICA). If fwm sic_reset fails, it means that there is a problem with the ICA or the certificates that prevents SIC from being reset. To resolve this problem, administrators need to change internal CA via cpconfig, which is a command that allows administrators to configure various settings on Security Gateways or Management Servers, including the ICA. Changing internal CA via cpconfig will create a new ICA with a new certificate, and allow SIC to be reset with the new certificate.

質問 # 377
As an administrator, you may be required to add the company logo to reports. To do this, you would save the logo as a PNG file with the name 'cover-company-logo.png' and then copy that image file to which directory on the SmartEvent server?