検証済み5V0-62.22問題集と解答で2024年最新の5V0-62.22をダウンロード
更新された100%カバー率リアル5V0-62.22試験問題で100%合格保証付いてます
質問 # 18
An organization wants to use the VMware Tunnel edge service of VMware Workspace ONE UAG (Unified Access Gateway) to allow an application on managed Android, iOS. and Windows devices to access server resources on their internal network.
An organization administrator deployed UAG and configured the VMware Tunnel edge service, but in the UEM console, "Test Connection" with VMware Tunnel fails What is the most likely cause of this issue"?
- A. The Device Traffic Rules are configured incorrectly in the Unified Access Gateway system
- B. The Device Traffic Rules are incorrect in UEM.
- C. The VPN payload in a device profile is configured incorrectly in UEM.
- D. The Unified Access Gateway is unable to communicate with UEM.
正解：C
解説：
Explanation
The most likely cause of this issue is that the VPN payload in a device profile is configured incorrectly in UEM. The VPN payload defines how devices connect to the VMware Tunnel edge service and access internal resources. If the VPN payload is incorrect, the devices will not be able to establish a VPN connection with the VMware Tunnel edge service and "Test Connection" with VMware Tunnel will fail. The organization should review and correct the VPN payload settings in UEM. The other options are not likely causes of this issue because:
* The Device Traffic Rules are configured in UEM, not in Unified Access Gateway. They define which applications or domains are allowed or blocked by the VMware Tunnel edge service.
* If the Device Traffic Rules are incorrect in UEM, they would affect all devices that connect to the VMware Tunnel edge service, not just "Test Connection" with VMware Tunnel.
* If the Unified Access Gateway is unable to communicate with UEM, it would affect all edge services that require UEM integration, such as Content Gateway and Horizon, not just VMware Tunnel.
質問 # 19
New information security requirements were put in place where remote access of any device must have a user present, and the user must consent to many of the remote actions Which VMware Workspace ONE Assist Agent mode will meet this requirement?
- A. Attended
- B. User Secure
- C. Unattended
- D. COPE
正解：A
解説：
Explanation
The VMware Workspace ONE Assist Agent mode that will meet this requirement is Attended Mode. Attended Mode is a mode that requires user consent and presence for remote sessions. The user can see and control the remote session, and can also pause or end it at any time for enhanced privacy2. Attended Mode also allows the user to approve or deny many of the remote actions, such as file transfer, command execution, or device information access2.
質問 # 20
Which VMware Tunnel utility can help troubleshooting by gathering all the necessary component log files that may be required during the process?
- A. tunnel_snap
- B. tunnela_udrt
- C. tunnel_vi
- D. tunnel_nano
正解：A
解説：
Explanation
The tunnel_snap utility can help troubleshooting by gathering all the necessary component log files that may be required during the process. This utility is available on both Linux and Windows versions of VMware Tunnel1. The tunnel_snap utility collects logs from the following components:
* VMware Tunnel service
* Per-App Tunnel service
* Proxy service
* Content Gateway service
* VMware Tunnel configuration files
* System information
* Network information The other options are not valid utilities for VMware Tunnel.
質問 # 21
An administrator has mistakenly selected the prevent re-enrollment option when enterprise wiping a device that was intended to be re-enrolled. The administrator needs to remove this block and ensure that users are successful when they re-attempt enrollment Which console page should be used to meet these goals?
- A. Devices > Lifecycle > Enrollment Status
- B. Devices > Wipe Log
- C. Resources > Device Updates
- D. Monitor > Events > Device Events
正解：A
解説：
Explanation
The console page that should be used to meet these goals is Devices > Lifecycle > Enrollment Status. This page allows the administrator to view and manage the enrollment status of devices, such as blocked, unenrolled, or pending1. The administrator can also remove the block on a device that was enterprise wiped with the prevent re-enrollment option, and allow the user to re-enroll the device.
質問 # 22
The following error is seen on the AirWatch Cloud Connector (ACC) logging:
Which connectivity should be investigated to restore ACC functionality?
- A. From the Active Directory Server to the ACC
- B. From ACC to AWCM
- C. From the ACC to the Active Directory server
- D. From AWCM to the Active Directory Server
正解：C
解説：
Explanation
The connectivity that should be investigated to restore ACC functionality is from the ACC to the Active Directory server. The error message in the ACC logging indicates that the ACC cannot connect to the Active Directory server due to a network error. This could be caused by firewall settings, proxy settings, network configuration, or other factors that prevent the ACC from communicating with the Active Directory server. The administrator should check and resolve these issues to restore the ACC functionality2.
質問 # 23
Which VMware Workspace ONE UEM console configuration page would be
- A. Groups & Settings > All Settings > Troubleshooting > Logging
- B. Groups & Settings > All Settings > System > Logging
- C. Groups & Settings > All Settings > Admin > Diagnostics > Logging
- D. Groups & Settings > All Settings > Storage > Logging
正解：C
解説：
Explanation
The VMware Workspace ONE UEM console configuration page that would be used to enable debug logging for a specific device is Groups & Settings > All Settings > Admin > Diagnostics > Logging5. This page allows administrators to enable debug logging for a specific device or a group of devices based on various criteria, such as platform, model, ownership, and so on5. Debug logging can help collect more detailed information about device events, actions, and errors for troubleshooting purposes.
質問 # 24
Which feature is included in VMware Workspace ONE Assist in Attended Mode?
- A. Remotely connect to any unenrolled or enrolled device in seconds, directly from the VMware Workspace ONE console
- B. View and export detailed device information, access activity logs, run commands, and manage files
- C. Restrict employees' ability to pause or end a remote session for enhanced privacy.
- D. Restrict additional users to a remote session to assist with issues.
正解：B
解説：
Explanation
The feature that is included in VMware Workspace ONE Assist in Attended Mode is view and export detailed device information, access activity logs, run commands, and manage files. This feature allows the administrator to remotely access the device screen and perform various actions to troubleshoot issues or assist the user. The administrator can also view the device details, such as battery level, network status, memory usage, and so on. The administrator can also access the device logs, run commands such as ping or traceroute, and manage the device files1.
質問 # 25
An administrator has been troubleshooting an issue where a single device is unable to check in to VMware Workspace ONE UEM and receive commands All services are functioning, and this issue appears to be isolated to this specific device. Service logs have also been reviewed and do not show any instances of communication with the device in question.
Which troubleshooting step should be taken next to find the root cause, while not causing any data loss to the end user's device?
- A. Renew the Device Root Certificate.
- B. Use Device Wipe, and then re-enroll the device.
- C. Manually update the device record in the DB.
- D. Gather Device Side Logging.
正解：D
解説：
Explanation
The troubleshooting step that should be taken next to find the root cause, while not causing any data loss to the end user's device, is to gather device side logging. Device side logging can help collect more detailed information about device events, actions, and errors for troubleshooting purposes. Device side logging can be enabled from the Workspace ONE UEM console or from the device itself. Device side logging does not affect the user's data or settings on the device.
質問 # 26
receiving a timeout error when accessing files using the VMware Workspace ONF Content application. The administrator needs to gather log files for troubleshooting these issues with the organization's internal file servers and shared SaaS Workspace ONE- UEM On which component should the administrator enable verbose logging?
- A. AWCM (AirWatch Cloud Messaging) service
- B. ACC (AirWatch Cloud Connector)
- C. Device Services service
- D. UAG (Unified Access Gateway) Edge service
正解：D
解説：
Explanation
The component that the administrator should enable verbose logging on is UAG (Unified Access Gateway) Edge service. UAG is a component that provides secure edge services for Workspace ONE UEM, such as VMware Tunnel, Content Gateway, or Secure Email Gateway2. If users are receiving a timeout error when accessing files using the Workspace ONE Content application, it could indicate that there is a problem with UAG configuration, connectivity, or performance. Enabling verbose logging for UAG can help identify and troubleshoot the issue.
質問 # 27
When an administrator attempted to integrate an organization's Microsoft Office 365 email system with their shared SaaS Workspace ONE UEM using PowerShell the "Session initialized" portion of the Test Connection process failed in the UEM Console What is the most likely cause of this issue?
- A. The administrator incorrectly configured UE:M with the PowerShell "Set-Execution Pol icy" command
- B. The administrator configured the email service account on Unified Access Gateway incorrectly
- C. The administrator configured the Office 365 service account incorrectly.
- D. The administrator incorrectly configured Secure Email Gateway.
正解：C
解説：
Explanation
The administrator configured the Office 365 service account incorrectly. The Office 365 service account is an account that Workspace ONE UEM uses to connect to the Exchange Online server via PowerShell and perform email management tasks, such as quarantine, wipe, or block. If the Office 365 service account is configured incorrectly, such as using an invalid username, password, or domain, Workspace ONE UEM will not be able to connect to the Exchange Online server, and the PowerShell integration test connection will fail.
The administrator should check and correct the Office 365 service account settings in Workspace ONE UEM.
質問 # 28
An VMware Workspace ONE administrator is using device-based commands to manage Android mobile devices, but the devices stopped receiving the UEM Commands from the Workspace ONE UEM Console (e.g.
"Lock Device")
Why is this problem occurring?
- A. The Workspace ONE UEM Console stopped communicating with VMware AirWatch Cloud Messaging (AWCM)
- B. The VMware AirWatch Cloud Connector (ACC) stopped communicating with VMware AirWatch Cloud Messaging (AWCM).
- C. The VMware AirWatch Cloud Connector (ACC) stopped communicating with Workspace ONE UAG.
- D. The Workspace ONE UEM Console stopped communicating with Workspace ONE Access.
正解：A
解説：
Explanation
The reason that this problem is occurring is that the Workspace ONE UEM Console stopped communicating with VMware AirWatch Cloud Messaging (AWCM). AWCM is a service that delivers push notifications to devices and enables device-based commands from the Workspace ONE UEM Console3. If the Workspace ONE UEM Console cannot communicate with AWCM, it will not be able to send commands to devices, such as "Lock Device". The administrator should check and resolve any issues with AWCM connectivity.
質問 # 29
An organization administrator recently integrated their shared SaaS VMware Workspace ONE UEM and their internal Microsoft Active Directory Most users report they can enroll their Android and iOS devices using their user account from the organization's internal Microsoft Active Directory, but a few users report they cannot The organization administrator find the user accounts of the users unable to enroll failed to synchronize to VMware Workspace ONE UEM What is the most likely cause of this issue?
- A. The organization administrator misconfigured the Bind Authentication Type.
- B. The users that failed to synchronize have two or more globally unique identifiers.
- C. The users that failed to synchronize are missing a phone number in Active Directory
- D. The organization administrator misconfigured the bind user credentials.
正解：B
解説：
Explanation
The most likely cause of this issue is that the users that failed to synchronize have two or more globally unique identifiers. The globally unique identifier (GUID) is a unique value that identifies each user account in Active Directory2. If a user account has more than one GUID, it will cause a conflict when synchronizing with Workspace ONE UEM and prevent the user from enrolling their devices3. The administrator should check and resolve any duplicate GUIDs in Active Directory.
質問 # 30
An organization administrator configures VMware Workspace ONE UEM to deploy a new internal Win32 application to Windows devices, which are all located in the same OG (organization group). Users of newer Windows devices with increased hardware capacities can install this application, but older Windows devices with lower capacities are unable to complete the installation.
What is the most likely cause of this issue?
- A. The assignment of the internal application via the common OG (organization group) is misconfigured
- B. The VMware Workspace ONE administrator set "RAM Required" for the application in the "Details" tab options.
- C. The organization's Windows Azure AD credentials in their Microsoft Store for Business expired.
- D. The VMware Workspace ONE administrator set "Admin Privileges" for the application in the "Details" tab options
正解：B
解説：
Explanation
The most likely cause of this issue is that the VMware Workspace ONE administrator set "RAM Required" for the application in the "Details" tab options. The "RAM Required" option specifies the minimum amount of RAM needed for the application to run on Windows devices. If some devices do not meet this requirement, they will not be able to complete the installation of the application. The administrator should check and adjust the "RAM Required" option for the application according to the device capabilities.
質問 # 31
An administrator has assigned a purchased application to a new group of EP devices and enabled device-based-licensing. However none of the assigned devices could install the application Which statement describes the possible cause of this problem?
- A. VPP invites are not accepted
- B. VPP sToken has expired.
- C. Devices do not have Workspace ONE Hub installed
- D. App Store is hidden.
正解：B
解説：
Explanation
The possible cause of this problem is that VPP sToken has expired. VPP (Volume Purchase Program) sToken is a token that allows Workspace ONE UEM to communicate with Apple's VPP service and manage purchased applications for iOS devices. If the VPP sToken expires or becomes invalid, Workspace ONE UEM will not be able to assign or distribute purchased applications to devices. The administrator should check and renew the VPP sToken if needed.
質問 # 32
An organization has successfully used VMware Workspace ONE UEM for the fast few weeks to deploy a public application on demand lo managed Android iOS and Windows devices that are located in the customer OG.
The Windows and Android device users can still install this application. The iOS device users, however, report that they can see and install other iOS applications from the VMware Workspace ONE Catalog, but they are unable see or install this iOS application What is the most likely cause of this issue?
- A. An organization administrator changed the assignment of the application to the customer
- B. An organization administrator changed an assignment group setting for the application.
- C. The organization's APNs certificate expired.
- D. The organization's VMware Workspace ONE UEM license needs updating
正解：A
解説：
Explanation
An organization administrator changed the assignment of the application to the customer OG (organization group). The assignment of an application determines which devices can see and install the application from the Workspace ONE Catalog. If an organization administrator changed the assignment of an application from a lower OG (such as customer) to a higher OG (such as global), it may affect the visibility and availability of the application for some devices in lower OGs. The administrator should check and restore the assignment of the application to the customer OG if needed.
質問 # 33
The SSL certificates for on-premises VMware Workspace ONE UEM recently expired and were rotated Soon after. Android devices entirely stopped receiving push notifications and many reported AWCM as being disconnected. It was confirmed that the SSL certificates held been rotated on IIS as well as the load balancer.
Which strategy accurately describes the solution for this problem?
- A. The AWCM keystore was missed for rotation of SSL certificates, so running the keytool import targeting the new certificate would resolve the issue
- B. The Device Services service was not restarted after the SSL certificate rotation on IIS. so restarting the service would resolve the issue.
- C. The SSL certificates were not updated on all device services servers, so updating the remaining servers would resolve the issue.
- D. The Device Management binding was not updated for SSL handshake compatibility, so selecting the correct binding would resolve the issue.
正解：A
解説：
Explanation
The strategy that accurately describes the solution for this problem is running the keytool import targeting the new certificate. The AWCM keystore is a Java keystore file that contains the SSL certificates used by AWCM to establish secure connections with devices and other components. If the SSL certificates are rotated on IIS and the load balancer, but not on the AWCM keystore, then AWCM will not be able to communicate with devices using push notifications. To resolve this issue, the administrator must import the new SSL certificates into the AWCM keystore using the keytool command2.
質問 # 34
A VMware Workspace ONE UEM administrator is troubleshooting an internal application installation that affects one Android device. Which two pieces of information will help the administrator with this task?
(Choose two)
- A. Verbosed Web Console log
- B. Internal application APK file
- C. Workspace ONE Intelligent Hub log
- D. Console server IIS log
- E. Android OS version
正解：B、E
解説：
Explanation
The two pieces of information that will help the administrator with this task are internal application APK file and Android OS version. The internal application APK file is the installation file for Android applications. The administrator can check if the file is corrupted, compatible, or configured correctly for the device. The Android OS version is the operating system version of the device. The administrator can check if the device meets the minimum requirements for the application or if there are any known issues or bugs with the OS version.
質問 # 35
......
VMware Workspace ONE 21.X UEM トラブルシューティングスペシャリスト認定試験、または5V0-62.22とも呼ばれるこの認定試験は、VMware Workspace ONE 環境を管理およびトラブルシューティングするスキルと知識を向上させたい IT プロフェッショナルを対象としています。この認定試験は、VMware Workspace ONE アーキテクチャ、機能、コンポーネント、および他の技術やシステムとの相互作用について、しっかりと理解している個人を対象としています。
リアル問題集で100%無料5V0-62.22試験問題集を試そう：https://www.jpntest.com/shiken/5V0-62.22-mondaishu