練習できる201問題には認定ガイド問題と解答とトレーニングを提供しています [Q88-Q106]

練習できる201問題には認定ガイド問題と解答とトレーニングを提供しています

無料F5 201テスト練習問題試験問題集

F5 201認定試験は、候補者がBIG-IPシステムを深く理解する必要がある挑戦的なテストです。この認定を保持しているIT専門家が、F5の製品を使用して複雑なネットワーク環境を管理および構成するために必要な知識とスキルを確保するように設計されています。

質問 # 88
Generally speaking, should the monitor templates be used as production monitors or should they be customized prior to use.

A. Monitor template customization is only a matter of preference, not an issue of effectiveness or performance.
B. Most templates, such as https, should have the receive rule customized to make the monitor more robust.
C. While some templates, such as ftp, must be customized, those that can be used without modification are not improved by specific changes.
D. Most templates, such as http and tcp, are as effective as customized monitors.

正解：B

質問 # 89
Which statement describes a typical purpose of iRules?

A. iRules can examine a server response and remove it from a pool if the response is unexpected.
B. iRules can be used to update the timers on monitors as a server load changes.
C. iRules can be used to add individual control characters to an HTTP data stream.
D. iRules can be used to look at client requests and server responses to choose a pool member to select for load balancing

正解：C

質問 # 90
The incoming client IP address is 195.64.45.52 and the last five connections have been sent to members A, C, E, D and B. Given the virtual server, pool, and persistence definitions and statistics shown in the above graphic, which member will be used for the next connection?

A. 10.10.20.4:80
B. 10.10.20.5:80
C. It cannot be determined with the information given.
D. 10.10.20.3:80
E. 10.10.20.2:80
F. 10.10.20.1:80

正解：D

質問 # 91
Refer to the exhibit.

A user attempts to connect to 10.10.10.1.80 using FTP over SSL with an FTPS client. Which virtual server will match and attempt to process the request?

A. nvfs
B. vs_http
C. vsjutps
D. vs_ftp

正解：D

質問 # 92
Refer to the exhibit.

A BIG-IP Administrator configures a now VLAN on an HA pair of devices that does NOT yet have any traffic. This action causes the assigned traffic group to fail over to the standby device.
Which VLAN setting should be changed to prevent this issue?

A. Source Check
B. Customer Tag
C. Auto Last Hop
D. Fail-safe

正解：D

質問 # 93
A BIG-IP device has only LTM and ASM modules provisioned. Both have nominal provisioning level. The BI6-IP Administrator wants to dedicate more resources to the LTM module. The ASM module must remain enabled. Which tmsh command should the BIG-IP Administrator execute to obtain the desired result?

A. modify /sys provision Itm level minimum
B. modify/sys provision asm level minimum
C. modify /sys provision asm level none
D. modify /sys provision Itm level dedicated

正解：B

質問 # 94
A BIG-IP Administrator defines a device Self IP . The Self IP is NOT reachable from the network. What should the BIG-IP Administrator verify first?

A. The correct interface has been selected.
B. The correct Trunk has been selected.
C. Verify if auto last hop is disabled.
D. The correct VLAN has been selected.

正解：D

質問 # 95
A user wants to use the iHealth Upgrade Advisor to determine any issues with upgrading TMOS from 13.0 to
13.1.
Where can the user generate the QKView to upload to iHealth?

A. System > Archives
B. System > Configuration
C. System > Software Management
D. System > Support

正解：D

質問 # 96
When network failover is enabled, which of the following is true?

A. The presence or absence of voltage over the fail over cable takes precedence over network failover.
B. A network failure will not cause a failover as long as there is a voltage across the failover cable.
C. The failover cable status is ignored. Failover is determined by the network status only.
D. Either a network failure or loss of voltage across the failover cable will cause a failover.

正解：B

質問 # 97
Which statement
is true concerning the default
communication between a redundant pair of BIGElIP devices.

A. Regardless of the configuration,
some data is communicated between the systems at regular intervals.
B. Connection mirroring data is shared through the serial faEl ilover cable unless network failover is enabled.
C. Communication between the systems cannot be effected by
port lockdown settings.
D. Data for both connection and persistence mirroring are shared through the same TCP connection.

正解：D

質問 # 98
A virtual server at 10.10.1.100:80 has the rule listed below applied. when HTTP_REQUEST { if {[HTTP::uri] ends_with "htm" } { pool pool1 } else if {[HTTP::uri] ends_with "xt" } { pool pool2 } If a user connects to http://10.10.1.100/foo.txt which pool will receive the request?

A. Unknown. The pool cannot be determined from the information provided.
B. None. The request will be dropped.
C. pool1
D. pool2

正解：D

質問 # 99
Refer to the exhibit.

Why is the virtual server responsive to incoming connections?

A. The pool member is disabled
B. The node monitor failed
C. The pool member monitor failed
D. The node is disabled.

正解：C

質問 # 100
Which three iRule events are likely to be seen in iRules designed to select a pool for load balancing? (Choose three.)

A. CLIENT_DATA
B. SERVER_DATA
C. SERVER_SELECTED
D. HTTP_REQUEST
E. HTTP_RESPONSE
F. CLIENT_ACCEPTED
G. SERVER_CONNECTED

正解：A、D、F

質問 # 101
Which two statements are true about SNATs. (Choose two.)

A. SNATs can be configured within a Profile definition.
B. SNATs can be configured within a Virtual Server definition.
C. SNAT's are enabled only on the VLAN where origin traffic arrives, by default
D. SNATs are enabled on all VLANs, by default.

正解：B、D

質問 # 102
A BIG-IP Administrator creates a new VLAN on BIG-IP Cluster Member A and attaches an Interface to it. Although the Auto Config Sync is in place, the new VLAN does NOT show up on Cluster Member B.
What should the BIG-IP Administrator do to ensure the new VLAN is configured on each Cluster Member?

A. Enable the Interface that is attached to the new VLAN on Cluster Member A.
B. Configure a Default Route for the new VLAN on Cluster Member A.
C. Reset the Device Trust of the BIG-IP Cluster on either Cluster Member.
D. Configure the new VLAN manually on Cluster Member B.

正解：D

質問 # 103
When can a single virtual server be associated with multiple profiles?

A. Never. Each virtual server has a maximum of one profile.
B. Often. Profiles work on different layers and combining profiles is common.
C. Unlimited. Profiles can work together in any combination to ensure that all traffic types are supported in a given virtual server.
D. Rarely. One combination, using both the TCP and HTTP profile does occur, but it is the exception.

正解：B

質問 # 104
Refer to the exhibit.

How many nodes are represented on the network map shown?

A. Two
B. One
C. Four
D. Three

正解：D

質問 # 105
To increase available bandwidth of an existing Trunk, the BIG-IP Administrator is adding additional interfaces.
Which command should the BIG-IP Administrator run from within bosh shell?