1Z0-1048-21問題集を掴み取れ！[最新2022]Oracle試験合格させます [Q34-Q57]

1Z0-1048-21問題集を掴み取れ！[最新2022]Oracle試験合格させます

1Z0-1048-21試験問題集PDF正確率保証と更新された問題

質問 34
Which is not a predefined approval task and task rule for payroll and project costing time entry approvals?

A. a Project Time Card Approval task that routes time cards that contain time entries with a reported project, task, and expenditure type to the appropriate Project Manager
B. a Payroll Time Card Approval task that automatically approves the time card if the total hours for time entries is 40 hours or less.
C. a Payroll Time Card Approval taskthat automatically approves the time card unless it contains absences
D. a Payroll Time Card Approval task that routes payroll time entries to the Line Manager if the total hours for a time card exceed 40 hours

正解: C

解説:
Explanation
Reference https://docs.oracle.com/cloud/farel12/globalcs_gs/FAUTL/FAUTL1471283.htm#FAUTL1471283

質問 35
Your customer has asked you to define an overtime period that is different from the time card period and wants todisplay the overtime bar on the calendar page and in the time card matrix.
Which two solutions meet this requirement?

A. Enable the highlight overtime periods option in the time entry properties section of time card matrix.
B. Enable the overtime option on the time categories to show overtime periods separately.
C. Create a repeating time period by selecting formula option to enable overtime periods separately.
D. Create a separate repeating time period by selecting overtime checkbox in period usage section.
E. Create a repeating time period by selecting period type as overtime to enable overtime periods separately.

正解: A,E

質問 36
Which two statements are true?

A. Time Card Approval Period must be a multiple of the Time Card period.
B. Time Card Approval Period is defined in the Time Consumer Set.
C. Time Card Approval Period can be less than the Time Card Period.
D. Time Card approval period must be the same as the Time Card period.

正解: B,D

質問 37
A customer requirement is todefine TCR rules that relate different types of time attribute (i.e., Payroll Time Type or Project and Task) values to the rule results.
Which option will allow the administrator to meet this requirement?

A. Use a delivered TCR formula to define new customer-defined templates. In the templates,enable the selection of Time Attribute Type and time attribute values in the Rule. Define the rules and assign them using a rule set.
B. Create a new customer-defined TCR formula andtemplates. In the templates, enable the selection of Time Attribute Type and time attribute values in the Rule. Define the rules and assign them using a rule set.
C. Use either a delivered TCR formula or create a new formula to define new customer-defined templates.
Enable the variousTime Attributes along with the data source in the templates. Define the new rules by selecting the specific type of attribute values for the time attributes in the rules. Assign the rules using a rule set.
D. This is not possible using the existing functionality.
E. Create a new customer-defined TCR formula and templates. In the template, define the RuleExecution Type as "Create" to enable the selection of Time Attribute Types and time attribute values in the Rule.
Define the rules and assign them using a rule set.

正解: E

質問 38
Workers can be assigned a night shift allowance when reporting time between 08:00PM and 11:00PM.
Which two options should you perform to configure that?

A. You define a unit's x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributes process, define a time entry field dependent on the payroll time type time attribute using the units x rate timeattribute, and manually assign one quantity of the dependent time attribute on the worker's time card.
B. You define a unit's x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributes process, and define a time calculation rule to automatically generate the night shift allowance based on the night conditions.
C. You define a unit's x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributes process, and manually assign one quantity of the payroll time type related to the night shift allowance on the worker's time card.
D. You define an hours x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributesprocess, and define a time calculation rule to automatically generate the night shift allowance based on the night conditions.

正解: C,D

質問 39
Workers need to record two mandatory and an additional four optional time card fields against each row of their start/stop time card. Which option will minimize the quantity of horizontal scrolling required when completing the weekly time card?

A. Configure the layout with the optional fields as Row Level Details.
B. Configure the layout to show all six time card fields and use personalization to adjust the column widths, including those for recording the start & stop time tothe smallest appropriate for the data.
C. Implement the same changes as in the first answer but also fix the two mandatory columns, so that only the optional and days of the week scroll.
D. Combine the optional fields together into one or two "multi attribute time card fields" and display these on the time card.
E. Use Daily Details to record optional fields.

正解: B

質問 40
How do you configure a time submission rule set used with time devices?

A. ManageTime Submission Rule Set and add the submission rules to the set.
B. Every time you create a time submission rule, the save action alsocreates a corresponding rule set.
C. Every time you associate a time submission rule with the processing profile, the add action creates a corresponding rule set.
D. Use the time device import process to add time submission rules to the rule set.

正解: C

解説:
Explanation
Reference https://docs.oracle.com/cloud/farel12/globalcs_gs/FAITL/FAITL2021781.htm#FAITL1788995

質問 41
When selecting delivered formula to use in defining a new template, if two delivered formula accomplish the same results, when must the formula with _AP be selected?

A. When the formula, template, and rule must access the time card data in an advanced sort order to complete correctly.
B. Selecting the formula defined with _AP is not required.
C. When the formula, template, and rule must process first in the rule set. Formula identified with _AP enables additional processing order logic from within the Time and Labor rule processing engine.
D. When the rule created with the formula/template must access data outside the current time card data.

正解: D

質問 42
You need to create an HCM group of workers that have the same value stored in their People Group field.
Howshould you define the HCM group?

A. Define a customer-defined value set and select from the Include Group section on the page.
B. Select a specific People Group Segment in the Group Eligibility section on the page,
C. Select a delivered value set in the Group Eligibility section.
D. Select a People Group from the list of Additional Employment Attributes in the Group Eligibility section.
E. This cannot be done.

正解: D

質問 43
What is the process for correcting errors in recent time cards that have been approved, transferred to Oracle Cloud Payroll, and paid?

A. The worker should correctand submit the time card which will be transferred to Oracle Cloud Payroll immediately.
B. The worker should correct and submit the time card which, after approval,will be transferred to Oracle Cloud Payroll the next time the Load Time Card batches process is run.
C. The worker should inform Payroll, who will correct the error directly in Oracle Cloud Payroll.
D. The worker should inform the manager of the error and the manager will inform Payroll, who will correct the error directly in Oracle Cloud Payroll.
E. The worker should correct and submit the time card which, after approval, will be transferred to Oracle Cloud Payroll immediately.

正解: D

質問 44
On a Payroll Time Card, workers enter time against different cost codes, and the customer requires the time card to be routed to the manager of the appropriate cost center or centers.
Which option iscorrect?

A. Use the Manage Approval Groups task to define an approval groupcomprising all Cost Center managers, and use an HCM group in the workers' Time Processing Profile to restrict approvers to only those required for the cost centers used on the time card.
B. Modify the delivered project's approval to route the time card to each Cost Center Manager instead of each Project Manager.
C. Cost center-based approval cannot be implemented.
D. Use the Manage Approval Groups task to define an approval group comprising all Cost Center managers. The Approval Rule will then route to the appropriate Cost Center managers.

正解: A

質問 45
You are setting up a scheduler profile for a manager, but you cannot find this manager in the Group Manager list.
What are three reasons for this?

A. This manager's hire date is later than the scheduler profile effectivestart date.
B. This manager is not identified as a Line Manager in his HR record.
C. You didn't run the Refresh Manager Hierarchy job.
D. This manager doesn't have the Time and Labor Manager role.

正解: A,C,D

解説:
Explanation
The Refresh Manager Hierarchy process populates the denormalized manager hierarchy table when personrecords are migrated from other applications. Otherwise, whenever a change is made to a person's manager hierarchy, the change is reflected automatically in the denormalized manager hierarchy table.
However, by running the Refresh Manager Hierarchy processin addition to these automatic individual updates, you can ensure that the denormalized manager hierarchy is as accurate as possible. Refresh Manager Hierarchy processes all types of manager hierarchies.

質問 46
A senior system designer has asked you to create time consumersets for both Project Costing and Project Execution Management by using the delivered time category of All Projects Entries and for time to be transferred only when approved. How should you achieve this?

A. This cannot be done because although the time consumer set can be configured to transfer time cards to Project Execution Management only when approved, the time category of All Projects Entries cannot beused.
B. This cannot be done because although All Projects Entries can be used for the time category, time cards can be transferred to Project Execution Management only when they are submitted.
C. You would modify the delivered All Projects Entries time category to contain only absence entries and use this in both time consumer sets. Transferring only on approval is the default behavior for both time consumers.
D. This cannot be done because only absence entries can be transferred to Project Execution Management and time cards transferred to Project Execution Management are transferred when they are submitted.

正解: D

質問 47
Your customer wants to customize time card layouts for managers and workers, so that a manager's layout displays and allows the override of default pay rates, but worker's layout displays it as read-only.
Whichstatement is correct about customizing the time card layout sets?

A. The worker layout automatically inherits any manager layout edits.
B. Manager layout doesn't inherit any worker layout edits.
C. Edit theworker layout first so that the manager layout inherits the edits, which you can then revise as required.
D. Edit the manager layout first so that the worker layout inherits the edits, which you can then revise as required.

正解: D

解説:
Explanation
Reference
https://docs.oracle.com/cloud/r13_update17b/globalcs_gs/FAITL/FAITL1470627.htm#FAITL1470627

質問 48
Which two capabilities are defined for workers in the Time Entry Profiles in Time and Labor?

A. rules for time card actions that control when workers can enter, update, and delete their time
B. layouts for reporting time
C. consumer set, validation, approval, and transfer processing
D. time card period

正解: A,B

解説:
Explanation
Reference https://docs.oracle.com/cd/E51367_01/globalop_gs/FAUTL/F1471298AN1531B.htm

質問 49
The Time and Labor Manager of an organization needs to search, edit, and enter time for employees.
What feature should they be given access to?

A. Timekeeper for Managers
B. Calendar Entry for Workers
C. Time Work Area for Workers
D. Set-up Manager Work Area
E. Time Management WorkArea

正解: A

解説:
Explanation
Reference https://docs.oracle.com/cd/E18727_01/doc.121/e13521/T83865T412733.htm

質問 50
How do you configure a Time Calculation Rule (TCR) formula and template to enable the TCR rule to display process results and a validation message from the same rule?

A. Define both a new TER and new TCR formula and TCR and TER templates. The TCR template defines a new input parameter to select the TER template, and then defines aTCR rule to display process and message results.
B. Define the TCR formula to call a Time Entry Rule (TER) formula and pass TER formula results to the TCR formula. Define a new TCR template to display the process and message results on the Output train stop.
C. Define a new TCR formula that calls a WFM validation utility formula within the TCR formula. Create a new TCR template to process time card results and pass back both TCR results and a validation messageto the time card.
D. Define a TER formula to call a TCR formula within the same TER formula. Define in a new TER template to enable the TER. Use theTER template to pass the process results and message back to a new TCR Template on the Outputs train stop.
E. Define both a new TER and new TCR formula and TCR and TER templates. The TCR template defines the process results, the TER defines the validationmessage. Assign the TCR and TER using appropriate rule sets and time processing profiles.

正解: B

質問 51
Which configuration step should you perform to display the unit of measure and quantity fields in time card matrices?

A. Enable display of the unit of measure option in the time entry setup profile.
B. Configure time categories to display the unit of measure column for time entries.
C. Enable display of the unit of measure option in the time processing setup profile.
D. Configure layouts to display the unit of measure column for time entries.
E. Enable display of the unit of measure option on the payroll time type attribute for the required element.

正解: A

解説:
Explanation
Reference
http://www.oracle.com/webfolder/technetwork/tutorials/tutorial/cloud/r13/wn/r13-wf-mgmt-wn.htm

質問 52
Your customer wants to route absence entries on time cards usingabsence approval rules, which uses the absence approval task to approve absence entries.
How can you achieve this requirement?

A. Set up Time Setup Profile with the appropriate option for Absence Approval Routing
B. Set up Time Card layout with the appropriate option for Absence Approval Routing
C. Set up Time Categories with the appropriate option for Absence Approval Routing
D. Set up Time Consumer Set with the appropriate option for Absence Approval Routing
E. Set up Time Processing Profile with the appropriate option for Absence Approval Routing

正解: A

質問 53
A customer needs to evaluate overtime on a weekly basis while using a biweekly time card period.
Which option outlines how this requirement can be supported?

A. A weekly time period would be attached to the Worker Time Processing Setup Profile in the Overtime Period field
B. A weekly time period would be attached to the TCR RuleTemplate, the TCR Rule, the TCR Rule Set
C. A weeklytime period would be attached to the Fast Formula used to create the TCR Rule Template
D. A weekly time period would be attached to the Worker Time Entry Setup Profile in the Overtime Period field

正解: B

質問 54
Which option will not enhance the reusability of a Time Calculation Rule template when defining rules?

A. Rule Template Definition > Time Card Events That Trigger Rule option
B. Rule Template Parameters > Formula Parameters types
C. Rule Template Definition >Summation Level
D. Rule Template Definition > Reporting Level
E. Rule Template Outputs > User Defined Output Sources

正解: E

質問 55
A customer requirement is to use the first part (week) of a biweekly time card period for validation purposes.
Which option outlines how this could be accomplished?

A. Create a new TER formula and rule templates. Define the validation period within the formula. Enable the summation level selection when defining the rule as an input parameter within the rule templates.
Create rules using the new rule templates and assign them using a rule set. Place the "Day Level" rules on Rows 1-7 for days 1-7 in the time card period, and the "Time Card Level" Rule in the 8th row. Use the Processing Sequence to order the rules.
B. Create a new TER formula and rule template. Define the validation period within the formula. Set the summation period to "Time Card Level" in the rule template and enable the input parameters. Create rules using the new rule template and assign them using a rule set.
C. Create a new rule template using a delivered TER formula. Enable input parameters in the template to define the validation period and set summation period to "Time Card Level." Create rules using the new rule template and assign them using a rule set.
D. Create a new rule template using a delivered TER formula. Enable input parameters in the template to define the validation period and set the summation period to "Day Level." Create rules using the new rule template and assign them using a rule set.

正解: A

質問 56
Which optionwill enable WFM formula to access HCM data outside the time entry object?

A. DBIs registered against the proper formula type can be used either directly or indirectly from the different Time and Labor formula types to access HCM data for the workeroutside the time card information.
B. Time and Labor formula must use the Workforce Management Subroutine or Workforce Management Utility formula to access HCM data for the worker outside the time card information.
C. Time and Labor formula can only access time card data passed into the formula from the time card.
Outside HCM data for the worker must be configured to be stored in the time card and passed to the formula using theManage Layout Sets setup task.
D. The formula used must be identified with the suffix _AP to access HCM data for the worker outside the time card information. The _AP stands for Advanced Processing.

正解: C

質問 57
......

最新をゲットせよ！1Z0-1048-21認定練習テスト問題試験問題集：https://www.jpntest.com/shiken/1Z0-1048-21-mondaishu