[2023年06月] 最新のFortinet NSE6_FWF-6.4テスト問題集とオンライン試験エンジン
Fortinet NSE6_FWF-6.4問題を提供していますNSE 6 Network Security Specialist問題集と完璧な解答付き
Fortinet NSE6_FWF-6.4試験は、セキュアな無線LANソリューションの知識と理解をテストする多肢選択問題からなります。試験は時間制限があり、候補者は特定の時間内に完了する必要があります。試験に合格するには、候補者は少なくとも70％のスコアを取得する必要があります。
質問 # 16
Which two statements about background rogue scanning are correct? (Choose two.)
- A. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- B. Background rogue scanning requires DARRP to be enabled on the AP instance
- C. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- D. A dedicated radio configured for background scanning can support the connection of wireless clients
正解：A、B
質問 # 17
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. 509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.
- B. A WPA2 or WPA3 personal wireless network
- C. A WPA2 or WPA3 Enterprise wireless network
- D. An X.509 to authenticate the authentication server
- E. An X.509 certificate to authenticate the client
正解：D、E
質問 # 18
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- B. Areas with the signal strength weaker than -68 dB are cut out of the map
- C. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- D. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
正解：C
質問 # 19
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- B. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
正解：B、C
質問 # 20
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Enable frequency handoff on the AP to band steer clients
- B. Increase the transmission power of the AP radios
- C. Install another AP in the reception area to improve available bandwidth
- D. Reduce the number of wireless networks being broadcast by the AP
正解：B
質問 # 21
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the AP CLI, using the cw_diag -d sta command
- B. On the AP CLI, using the cw_diag ksta command
- C. On the controller CLI, using the diag wireless-controller wlac -d sta command
- D. On the controller CLI, using the WiFi Client monitor
正解：B
質問 # 22
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
- B. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- C. DARRP measurements can be scheduled to occur at specific times.
- D. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
正解：A、B
解説：
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
質問 # 23
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
- A. Configure a bridge mode wireless network and enable the Local standalone configuration option
- B. Configure a tunnel mode wireless network and enable split tunneling to the local network
- C. Install supported FortiAP and configure a bridge mode wireless network
- D. Configure a bridge mode wireless network and enable the Local authentication configuration option
正解：B
質問 # 24
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user online activity
- B. Provides real-time insight into user usage stats
- C. Provides real-time insight into user purchase activity
- D. Provides real-time insight into user movements
正解：B
解説：
This geographical data analysis provides real-time insights into user behavior.
質問 # 25
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Project information phase
- B. Site survey phase
- C. Hardware selection phase
- D. Installation phase
正解：A、B
質問 # 26
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Static
- B. Broadcast
- C. DHCP
- D. Multicast
正解：C
質問 # 27
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Configure the controller for the correct country code for Germany
- B. Create a new FortiAP profile and change the county code settings on the profile
- C. Clone a suitable FortiAP profile and change the county code settings on the profile
- D. Configure the APs individually by overriding the settings in Managed FortiAPs
正解：C
質問 # 28
Which two statements about background rogue scanning are correct? (Choose two.)
- A. A dedicated radio configured for background scanning can support the connection of wireless clients
- B. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- C. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- D. Background rogue scanning requires DARRP to be enabled on the AP instance
正解：A、B
解説：
To enable rogue AP scanning
質問 # 29
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 58 Egress-VLAN-Name
- B. 81 Tunnel-Private-Group-ID
- C. 83 Tunnel-Preference
- D. 65 Tunnel-Medium-Type
- E. 64 Tunnel-Type
正解：B、D、E
解説：
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
質問 # 30
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA2 Enterprise
- B. Open, with radius MAC filtering
- C. WPA3 Enterprise
- D. WPA2 Personal and radius MAC filtering
正解：A
解説：
Best security option is WPA2-AES.
質問 # 31
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user online activity
- B. Provides real-time insight into user purchase activity
- C. Provides real-time insight into user usage stats
- D. Provides real-time insight into user movements
正解：D
質問 # 32
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?
- A. Security Fabric and HTTPS must be enabled on the wireless network interface
- B. The wireless network interface must be assigned a Layer 3 address
- C. The new network must be manually assigned to a FortiAP profile.
- D. The wireless network to Internet firewall policy must be configured
正解：D
解説：
A FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.
質問 # 33
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)
- A. Predicting the number of guest users visiting on-site
- B. Gathering details about on site visitors
- C. Reporting potential threats by guests on site
- D. Comparing current data with historical records
正解：B、D
質問 # 34
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)
- A. Gathering details about on site visitors
- B. Comparing current data with historical records
- C. Predicting the number of guest users visiting on-site
- D. Reporting potential threats by guests on site
正解：A、C
質問 # 35
......
2023年最新のNSE6_FWF-6.4テスト解説（更新されたのは31問があります)：https://www.jpntest.com/shiken/NSE6_FWF-6.4-mondaishu