[2025年08月07日] 最新UiPath-ADPv1のPDF問題集リアル無料テスト本日更新です
UiPath-ADPv1問題集には100%厳密検証された問題と解答で合格保証もしくは全額返金
UiPath UiPath-ADPv1 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
質問 # 85
A developer is building an automation which types text into a text file. The Activity Project Settings tor UI Automation Modern activities are set as follows:
The developer has configured the properties of a Type Into activity as follows:
What is the behavior of the Type Into activity when executing the workflow?
- A. The activity will remove a Single Line in Run mode and Multi Line in Debug mode.
- B. The activity will remove a Single Line in Run mode and in Debug mode.
- C. The activity will use only properties set in Activity Project Settings.
- D. The activity will remove Multi Line in Run mode and a Single Line in Debug mode.
正解：A
解説：
The behavior of the Type Into activity when executing the workflow is that the activity will remove a Single Line in Run mode and Multi Line in Debug mode. This is because the activity has the Empty field property set to NEmptyFieldMode.SingleLine, which means that the activity will delete the existing content in the field by sending Ctrl+A and Delete keystrokes before typing the text. However, the activity also has the Debug mode property set to NEmptyFieldMode.MultiLine, which means that the activity will delete the existing content in the field by sending Ctrl+A, Shift+Home, and Delete keystrokes before typing the text. The Debug mode property overrides the Empty field property when the workflow is executed in Debug mode. Therefore, the activity will use different keystrokes to empty the field depending on the mode of execution. References:
[Type Into], [Empty Field], [Debug Mode]
質問 # 86
A developer has created a string array variable as shown below:
UserNames = {"Jane", "Jack", "Jill", "John"}
Which expression should the developer use in a Log Message activity to print the elements of the array separated by the string ","?
- A. String.Join(", ", UserNames)
- B. String.Join(UserNames, ", ")
- C. String.Concat(",", UserNames)
- D. String.Concat(UserNames,",")
正解：A
解説：
To print the elements of a string array separated by a specific string, the String.Join method is used in C#. This method takes two parameters: the first is the separator string and the second is the array to join into a single string.
Given the options and the requirement to separate array elements with a comma and a space (", "), the correct expression to use in a Log Message activity would be:
C: String.Join(", ", UserNames)
This will produce a single string with each element of the UserNames array separated by ", " (a comma followed by a space).
質問 # 87
A developer wants to add items to a list of strings using the Invoke Method activity. The list is declared as follows:
The Invoke Method activity has the following properties:
The Parameters property is as follows:
Based on the information shown in the exhibits what is the outcome of the Invoke Method activity?
- A. Colors will contain an item with an empty value.
- B. Colors will contain an item with the value "Colors: Yellow".
- C. Colors will contain an item with the value "Yellow".
- D. An exception will be thrown.
正解：C
解説：
The Invoke Method activity is used to invoke a method of a class or an object. In this case, the developer wants to add items to a list of strings using the Invoke Method activity. The list is declared as follows:
Dim Colors As New List(Of String)
This means that the list is named Colors and it can store strings. The Invoke Method activity has the following properties:
* TargetType: System.Collections.Generic.List`1[System.String]. This means that the target type is a generic list of strings.
* TargetObject: Colors. This means that the target object is the list named Colors.
* MethodName: Add. This means that the method name is Add, which is a method of the list class that adds an item to the end of the list.
* Parameters: In, String, Yellow. This means that the parameter direction is In, which means that the value is passed to the method. The parameter type is String, which means that the value is a string. The parameter value is Yellow, which means that the value is the string "Yellow".
Based on the information shown in the exhibits, the outcome of the Invoke Method activity is that Colors will contain an item with the value "Yellow". This is because the Invoke Method activity will add "Yellow" to the list of strings declared as Colors.
質問 # 88
Which one of the following expressions Is the equivalent of the If activity from the picture?
- A. message = lf(number mod 2 = 0 then "Odd number" else "Even number")
- B. message = lf(number mod 2 = 0. "Even number", "Odd number")
- C. message = lf(number mod 2 = 0. Odd number. Even number)
- D. message = lf(number mod 2 = 0 {"Odd number"} else {'Even number"})
正解：B
解説：
This expression evaluates if the number modulo 2 equals 0, which would mean it is even. If true, it assigns the string "Even number" to the variable message. If false (meaning the number is odd), it assigns "Odd number" to message
質問 # 89
At indication time, the Strict Selector has the following functionalities available:
- A. Ignore text. Copy to clipboard. Show all matches.
- B. Refresh, Open in UiExplorer, Copy to clipboard.
- C. Accuracy, Open in UiExplorer, Copy to clipboard. Show all matches.
- D. Open in UiExplorer, Copy to clipboard, Show all matches.
正解：D
解説：
The Strict Selector is a targeting method that uses the selector information of a UI element to identify it on the screen. It is one of the four targeting methods available in UiPath Studio, along with Fuzzy Selector, Image, and Computer Vision1. The Strict Selector is considered to be the most reliable and stable targeting method, as it uses the attributes and properties of the UI element that are unlikely to change2.
At indication time, the Strict Selector has the following functionalities available:
* Open in UiExplorer: This option opens the UiPath Explorer window, where you can inspect and edit the selector information of the indicated UI element, as well as use advanced features such as anchors, wildcards, variables, and regex3.
* Copy to clipboard: This option copies the selector information of the indicated UI element to the clipboard, so you can paste it elsewhere, such as in a text editor or another activity.
* Show all matches: This option highlights all the UI elements on the screen that match the selector information of the indicated UI element. This helps you to check if there are any duplicates that might cause the automation to fail at runtime. You can also use the Ignore text option to exclude the text attribute from the selector information, which might reduce the number of matches4.
The other options are incorrect because:
* Option A is incorrect because it does not include the Show all matches option, which is available for the Strict Selector.
* Option B is incorrect because it does not include the Open in UiExplorer option, which is available for the Strict Selector.
* Option D is incorrect because it includes the Accuracy option, which is not available for the Strict Selector. The Accuracy option is only available for the Image targeting method, which allows you to adjust the similarity threshold between the indicated image and the target image5.
References:
* Studio - Targeting Methods - UiPath Documentation Portal
* Studio - Strict Selector - UiPath Documentation Portal
* Studio - UiPath Explorer - UiPath Documentation Portal
* Activities - Advanced descriptor configuration - UiPath Documentation Portal
* Studio - Image - UiPath Documentation Portal
質問 # 90
A developer plans to build an automation process using the REFramework with Orchestrator queues. Based on UiPath best practice, what is the recommended sequence of steps to update the template and create/update Queues and Values?
Instructions: Drag the Description found on the left and drop on the correct Step Sequence found on the right.
正解：
解説：
Explanation:
A screenshot of a computer program Description automatically generated
To align with UiPath's best practices when updating the REFramework template for use with Orchestrator queues, the sequence of steps should ensure proper setup of the queues in Orchestrator, configuration of the project to interact with these queues, and implementation of the business logic to process items from the queues.
Here's how the steps should be sequenced:
Step 1: Create the queue in Orchestrator and set its Auto Retry value as required by the process documentation.This step ensures that the queue is available in Orchestrator with the correct settings before the automation attempts to interact with it.
Step 2: Edit the project's configuration file (Data/Config.xlsx) and configure parameters OrchestratorQueueName and OrchestratorQueueFolder.Once the queue is created, the next step is to ensure that the automation project is configured to reference the correct queue and folder within Orchestrator.
Step 3: Edit GetTransactionData.xaml workflow and assign a proper value for the out_TransactionID argument.This configuration allows the workflow to correctly fetch transaction items from the Orchestrator queue for processing.
Step 4: Edit workflow Process.xaml and implement the logic to process each TransactionItem.Finally, the core processing logic that operates on each queue item is implemented, allowing the automation to perform the necessary actions for each transaction.
質問 # 91
How does UiPath handle different dependency versions for multiple running processes that run at the same time?
- A. Each running process automatically adapts to the available dependency version.
- B. All running processes use the latest version of the dependency available.
- C. Running processes use the earliest compatible dependency version.
- D. Each running process uses its own required version of the dependency.
正解：D
解説：
UiPath handles different dependency versions for multiple running processes that run at the same time by using the concept of isolation. This means that each running process uses its own required version of the dependency, without affecting or being affected by other processes. This ensures that the processes run smoothly and consistently, regardless of the dependency versions. The isolation is achieved by using the NuGet protocol, which allows the robot to download and store the dependencies in a local cache folder. The robot then loads the dependencies from the cache folder into separate application domains for each process, creating isolated environments for each process. References: [Managing Dependencies], [About the NuGet Protocol]
質問 # 92
Which of the following demonstrates the correct syntax for using the Vb.Net "If" Operator?
- A. If(condition1, valueIfTrue) ElseIf(valueIfFalse)
- B. If(condition1, valueIfTrue, valueIfFalse)
- C. If condition1 Then valueIfTrue Elself valueIfFalse
- D. valueIfTrue If condition1 Else valueIfFalse
正解：B
解説：
The correct syntax for using the Vb.Net If operator is If(condition1, valueIfTrue, valueIfFalse). The If operator is a ternary operator that returns one of two values, depending on whether the condition is true or false. The condition must be a Boolean expression or a data type that can be implicitly converted to Boolean. The valueIfTrue and valueIfFalse arguments can be any data type, but they must be the same or implicitly convertible to a common type. The If operator uses short-circuit evaluation, which means that it only evaluates the argument that corresponds to the result of the condition. For example, the following expression returns
"Positive" if the variable number is greater than or equal to zero, and "Negative" otherwise:
VB Dim result As String = If(number >= 0, "Positive", "Negative") References: [If Operator], [Ternary Operator]
質問 # 93
What is a pre-requisite for running functional test cases in REFramework?
- A. Invoke Process XAML file
- B. Invoke Main XAML file
- C. Invoke InitAIISettings XAML file
- D. Invoke SetTransactionStatus XAML file
正解：C
解説：
A pre-requisite for running functional test cases in REFramework is to invoke the InitAIISettings XAML file.
This file is responsible for initializing the AI Fabric settings and connecting to the Orchestrator. It also checks if the AI Fabric environment is ready and if the ML skills are deployed and available. Without invoking this file, the functional test cases that use AI Fabric features will not work properly. References: [REFramework for AI Fabric]
質問 # 94
Where in the REFramework template project is the "SetTransactionStatus.xaml" invoked?
- A. In the Try section of the Try Catch activity in the Process Transaction state.
- B. In the Try section of the Try Catch activity in the End Process state.
- C. In the Try and Catches sections of the Try Catch activity in the Process Transaction state.
- D. In the Finally section of the Try Catch activity in the End Process state.
正解：C
質問 # 95
Consider testing a workflow that computes the sum of two numbers having the data driven test data from the Excel file below:
Expanding the functionality of the workflow to compute the sum of three numbers, the data needs to be updated as well to accommodate the new scenario:
What are steps to do that?
- A. Click Right on the Test Case and select Remove Test Data.
- B. Click Right on the Test Case and select Add Test Data.
- C. Click Right on the Test Case and select Refresh Test Data
- D. Click Right on the Test Case and select Update Test Data
正解：C
解説：
When expanding the functionality of a workflow to compute the sum of three numbers instead of two, and having to update the test data in an Excel file accordingly, you would generally need to:
* Open the Excel file that contains the test data.
* Add a new column for the third number (e.g., Number3).
* Fill in the data for the new column with the appropriate values for the test cases.
* Save the Excel file with the updated data.
* Refresh or update the data source in the test case to reflect these changes.
This is because "Refresh Test Data" suggests that the test case will re-import or re-read the test data from its source, which in this case is the updated Excel file with the additional Number3 column. "Update Test Data" might also seem appropriate, but it typically refers to a scenario where you need to update the test case's reference to the data, not the structure of the data itself. "Add Test Data" and "Remove Test Data" are not appropriate as they imply adding a new data set or removing an existing one, rather than refreshing or updating the existing data set with the new column.
質問 # 96
How are mock files organized in an automation project structure?
- A. They are stored in a dedicated folder for mock testing configuration.
- B. They are stored in a nested structure based on the source workflow's file tree.
- C. They are stored in a separate folder called "Mocks".
- D. They are stored in the same folder as the source workflow.
正解：C
解説：
Mock files in an automation project structure are usually stored in a separate folder named "Mocks". This organization helps in managing and accessing mock data efficiently during testing.
質問 # 97
Considering that the attached table is stored in a variable called "dt":
Which LINQ query can be used to return the maximum total Quantity?
- A. dt.AsEnumerable. OrderByDescending(Function(x) Convert.ToInt32(x("Quantity").ToString)).First.Item("Quantity")
- B. dt.AsEnumerable. Max(Function(x) Convert.ToInt32(x("Quantity").ToString))("Item")
- C. dt.AsEnumerable. Max(Function(x) Convert.ToInt32(x("Quantity").ToString))
- D. dt.AsEnumerable. GroupBy(Function(x) x("Item").ToString). Max(Function(x) x.Sum(Function(y) Convert.ToInt32(y("Quantity").ToString)))
正解：D
解説：
The LINQ query that can be used to return the maximum total Quantity from the attached table is dt.AsEnumerable. GroupBy(Function(x) x("Item").ToString). Max(Function(x) x.Sum(Function(y) Convert.ToInt32(y("Quantity").ToString))). This query uses the LINQ methods AsEnumerable, GroupBy, Max, and Sum to manipulate the data in the dt variable. The dt variable is a DataTable that contains the following data:
No.
Item
Quantity
1
apple
10
2
orange
20
3
mango
50
4
kiwi
80
5
pear
1
6
apple
5
7
mango
15
The AsEnumerable method converts the DataTable into an Enumerable collection of DataRow objects. The GroupBy method groups the elements of the collection by the value of the Item column, creating a collection of groups. Each group has a key, which is the Item name, and a list of elements, which are the DataRows that have the same Item value. The Max method returns the maximum value of the collection, based on a selector function. The selector function is a lambda expression that calculates the sum of the Quantity column for each group. The Sum method returns the sum of the elements in a collection, based on a selector function. The selector function is a lambda expression that converts the value of the Quantity column into an integer.
Therefore, the query will group the DataRows by the Item name, calculate the total Quantity for each group, and return the maximum total Quantity among the groups. The maximum total Quantity is 80, which corresponds to the group with the key "kiwi". References: [DataTable.AsEnumerable Method],
[Enumerable.GroupBy Method], [Enumerable.Max Method], [Enumerable.Sum Method]
質問 # 98
While working in an RPA testing project, you encountered the following activity in one of the workflows included in the project.
What action can you perform in your mocked file to replace the functionality of the MessageBox with a LogMessage during mock testing?
- A. Create mock workflow.
- B. Synchronize mock.
- C. Surround activity with mock.
- D. Remove mock activity.
正解：C
解説：
To replace the functionality of the MessageBox with a LogMessage during mock testing, the developer can perform the action of Surround activity with mock. This action inserts a mock activity around the selected activity, which allows the developer to change the behavior of the activity for testing purposes. For example, the developer can right-click on the MessageBox activity and select Surround activity with mock from the dropdown menu. This will create a mock activity that contains the MessageBox activity. The developer can then edit the mock activity and replace the MessageBox activity with a LogMessage activity, which will write the message to the output panel instead of displaying it in a dialog box. This way, the developer can test the functionality of the workflow without having to interact with the MessageBox dialog box. References: [Mock Testing], [Surround Activity with Mock]
質問 # 99
Which of the following options is correct about a State Machine layout?
- A. Can have only one initial state and only one final state.
- B. Can have only one initial state and multiple final states.
- C. Can have multiple initial states and multiple final states.
- D. Can have multiple initial states and only one final state.
正解：B
解説：
The correct option about a State Machine layout is that it can have only one initial state and multiple final states. A State Machine is a type of workflow that consists of a set of states, transitions, and triggers. A state represents a stage of the process, a transition represents a change from one state to another, and a trigger represents a condition or an event that activates a transition. A State Machine can have only one initial state, which is the starting point of the workflow, and one or more final states, which are the end points of the workflow. A State Machine can also have intermediate states, which are the states between the initial and the final states. A State Machine can have multiple paths and branches, depending on the logic and the triggers of the workflow.
質問 # 100
A developer extracts a date from an email. The date will always be In the same format and always from the past. Some examples of this format are: "3 Mar 2023". "20 Nov 2021". The name of the variable where the date is saved is DateString What expression should the developer use to check If the extracted date is within the last 7 days?
- A. (DateTime.Now - DateTime.ParseExact(DateStnng. *dd MMM yyyyH. Culturelnfo.lnvariantCulture)).
AddDays(-7) > 0 - B. (DateTime.Now - DateTime.ParseExact(DateStrlng, "d MMM yyyy". Culturelnfo.lnvariantCulture)).
Days < 7 - C. DateTime Parse(DateTime Now - DateString) Days < 7
- D. (DateTime.Now - DateTime.ParseExact(DateString. "dd MMM yyyy". Culturelnfo.lnvariantCulture)).
Days < 7
正解：B
解説：
* The date is in the format "d MMM yyyy" (e.g., "3 Mar 2023").
* The correct expression is: (DateTime.Now - DateTime.ParseExact(DateString, "d MMM yyyy", CultureInfo.InvariantCulture)).Days < 7.
* This expression calculates the difference in days between the current date (DateTime.Now) and the parsed date (DateTime.ParseExact(DateString, "d MMM yyyy", CultureInfo.InvariantCulture)).
* It then checks if this difference is less than 7 days, which means the date is within the last 7 days.
質問 # 101
While working in an RPA testing project, you encountered the following activity in one of the workflows included in the project.
What action can you perform in your mocked file to replace the functionality of the MessageBox with a LogMessage during mock testing?
- A. Create mock workflow.
- B. Synchronize mock.
- C. Surround activity with mock.
- D. Remove mock activity.
正解：C
解説：
To replace the functionality of the MessageBox with a LogMessage during mock testing, the developer can perform the action of Surround activity with mock. This action inserts a mock activity around the selected activity, which allows the developer to change the behavior of the activity for testing purposes. For example, the developer can right-click on the MessageBox activity and select Surround activity with mock from the dropdown menu. This will create a mock activity that contains the MessageBox activity. The developer can then edit the mock activity and replace the MessageBox activity with a LogMessage activity, which will write the message to the output panel instead of displaying it in a dialog box. This way, the developer can test the functionality of the workflow without having to interact with the MessageBox dialog box. References: [Mock Testing], [Surround Activity with Mock]
質問 # 102
......
2025年最新の有効なUiPath-ADPv1テスト解答UiPath試験PDF：https://www.jpntest.com/shiken/UiPath-ADPv1-mondaishu
合格させるUiPath UiPath-ADPv1試験には練習テスト問題集豪華お試しセット：https://drive.google.com/open?id=17EpuOZtxe1fzuemrBDRdKIy3E1UqFoaG