（2026)2V0-16.25問題集と練習テスト（62問題)
ガイド（2026年最新)リアルなVMware 2V0-16.25試験問題
VMware 2V0-16.25 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 33
In VMware Cloud Foundation (VCF) Operations, which node type is responsible for providing fault tolerance for administrative functions within the VCF Operations cluster?
- A. Data Node
- B. Witness Node
- C. Primary Node
- D. Replica Node
正解：D
解説：
InVCF Operations (vRealize Operations) cluster architecture:
* ThePrimary Nodehandles administration and management.
* TheReplica Nodeprovidesfault tolerance for the Primary Node, ensuring that administrative functions remain available in case of failure.
* Data Nodeshandle data collection and analytics.
* Witness Node# Not a role in VCF Operations; relevant to vSAN clusters.
Thus, the node type providingfault tolerance for administrative functionsis theReplica Node.
References:
VMware Cloud Foundation 9.0 -Operations Cluster Roles
VMware Docs: vROps Node Types
質問 # 34
The security team requests the ability to log into VMware vCenter and review datacenter, cluster and network configurations. The following details are provided:
* The security team is not authorized to make any changes to the environment.
* Each user must login with unique credentials.
What steps should the administrator perform to grant access to the security team?
- A. Create a security user, assign the user the Read-Only role, share the credentials with the security team.
- B. Share the password for '[email protected]' with the security team.
- C. Create a group for the security team, add the users to the group, and assign the group the Network Administrator role.
- D. Create a group for the security team, add the users to the group, and assign the group the Read-Only role.
正解：D
解説：
The security team requiresvisibility into vCenter configurationsbut must not make changes.
* Best practice is tocreate an Active Directory or vCenter group, add the security users, and assign them theRead-Only roleat thedatacenter/cluster/networklevel.
* This ensures each user logs in with unique credentials, maintaining accountability.
Why others are incorrect:
* A. Share [email protected] password# Violates security best practices.
* B. Create a single user and share credentials# Still insecure, lacks unique audit trails.
* C. Assign Network Administrator role# Grants configuration permissions, not allowed.
References:
VMware vSphere 9.0 Documentation -Roles and Permissions Best Practices
VMware Docs: vCenter Server Role-Based Access Control
質問 # 35
An administrator is tasked with developing an automated, repeatable process to:
* Connect to the corporate Active Directory and create a Windows computer object in a defined Organizational Unit.
* Connect to the target vCenter and create a Windows VM from a template.
* Power on the VM and join it to the corporate domain.
Which VMware vSphere Foundation (VVF) component is best suited for this task?
- A. VCF Operations
- B. VCF CLI
- C. VCF Operations Orchestrator
- D. vSphere Supervisor
正解：C
解説：
The scenario describes anautomated, repeatable workflow:
* Create an AD computer object.
* Deploy a VM from a template.
* Power on the VM and join domain.
The correct tool isVCF Operations Orchestrator(formerly vRealize Orchestrator), which:
* Provides automation and integration withActive DirectoryandvCenter APIs.
* Can execute workflows for VM provisioning and domain joining.
Other options:
* A. vSphere Supervisor# Kubernetes workload management, not AD/VM automation.
* B. VCF Operations# Monitoring and analytics, not workflow automation.
* C. VCF CLI# Useful for manual scripting but not suited for automated workflows.
References:
VMware Cloud Foundation 9.0 -VCF Operations Orchestrator Automation Use Cases VMware Docs: vRealize Orchestrator Integration with vSphere & AD
質問 # 36
An administrator is tasked to optimize storage utilization in an existing VMware vSAN Original Storage Architecture (OSA) cluster.
The cluster has the following configuration:
* Eight-node cluster with 1 disk group per node.
* Virtual machines (VMs) are configured with 1 failure - RAID-1 storage policy.
* Storage utilization is at 70%.
Which action can the administrator take to reduce the existing storage utilization with the minimum impact to the cluster?
- A. Change the storage policy to 2 failure - RAID-6.
- B. Enable Deduplication and Compression on the cluster.
- C. Enable Compression only on the cluster.
- D. Change the storage policy to 3 failure - RAID-1.
正解：A
解説：
In avSAN Original Storage Architecture (OSA)cluster, the choice of storage policy directly impacts storage efficiency and resilience:
* Current Setup:
* Eight-node cluster, 1 disk group per node.
* VMs are usingFTT=1 RAID-1 (mirroring)policy.
* Storage utilization is already at70%.
* RAID-1 (Mirroring):
* Each piece of data is mirrored, requiring2x storage capacity.
* Space efficiency ~50%.
* RAID-6 (Erasure Coding, FTT=2):
* Requires a minimum of6 hosts, satisfied here with 8.
* Uses erasure coding instead of full mirroring, giving ~67% space efficiency.
* Provides resilience against2 host failureswhile using less space than RAID-1.
Thus, switching fromRAID-1 FTT=1toRAID-6 FTT=2reduces overall storage utilization while still improving resilience.
Why not the other options?
* A. Enable Deduplication and Compression##In OSA, enabling this requires acluster-wide disk group reformat, which is disruptive and not the minimal impact choice.
* B. Change policy to 3 failure - RAID-1##Increases redundancy but consumesmuch more capacity, worsening utilization.
* C. Enable Compression only##Not available in OSA (only in ESA). OSA supportsdeduplication + compression together, not compression-only.
* D. Change to 2 failure - RAID-6##Meets resilience requirements,reduces storage usage, and is supported on 8-node OSA clusters.
References:
VMware vSAN 9.0 Documentation -RAID-5/6 Erasure Coding requires 6+ hosts and improves space efficiency VMware vSAN Design Guide -RAID-1 vs RAID-5/6 efficiency and requirements VMware Cloud Foundation 9.0 Documentation -Changing storage policies triggers online reconfiguration without cluster-wide reformat
質問 # 37
An administrator is tasked to configure shared storage for a VMware vSphere Foundation (VVF) cluster at a remote location.
The following is available at the remote location:
* Two ESX servers.
* Two 1GbE network cards per ESX.
* One sixteen port 1GbE Switch.
* One NVMe per ESX for the Operating System.
* One storage system supporting network and fiber channel capabilities.
What storage protocol must the administrator use at the remote location?
- A. NFS
- B. Fiber Channel
- C. vSAN
- D. Local Storage
正解：A
解説：
The scenario:
* Remote sitewith 2 ESXi servers, 1GbE networking only.
* Storage system supports both network (NAS/iSCSI/NFS) and Fiber Channel.
* Fiber Channel is not feasible (no FC switches/HBAs).
* vSAN requires more than 2 nodes (minimum 3 for standard vSAN, 2+Witness for 2-node), not mentioned here.
The most suitable solution:
* UseNFS storage over 1GbE. (D)
* Provides shared storage accessible to both ESXi hosts.
Other options:
* A. vSAN# Needs 3+ nodes or a witness, not supported in this config.
* B. Local storage# Not shared, fails HA/DRS requirements.
* C. Fiber Channel# Requires HBAs and FC switch, not available.
References:
VMware vSphere 9.0 -Supported Storage Protocols
VMware Docs: Using NFS with ESXi Hosts
質問 # 38
An administrator has been tasked to share resources in the cluster between the Quality Assurance (QA) Department and Marketing Department. The following information has been provided:
* In the case of contention, the QA Department must not lose any performance.
* When the QA Department is not using all of its allocated resources, the Marketing Department requires the ability to consume them.
* The administrator has set up resource pools for the QA Department (RP-QA) and Marketing Department (RP-MKT).
How should the resource shares be configured for each pool?
- A. Set both Resource Pools to Fixed.
- B. It is not possible to satisfy the requirements of both departments.
- C. Set RP-QA to Scalable and RP-MKT to Fixed.
- D. Set RP-QA to Fixed and RP-MKT to Scalable.
正解：D
解説：
The requirements:
* QA must not lose performance during contention# QA must haveguaranteed resources, soFixedis correct.
* Marketing can use leftover resources when QA is idle# Marketing must beScalable, so it can borrow resources from QA's allocation when available.
Other options:
* A. Both Fixed# Marketing would not be able to use QA's unused resources.
* C. QA Scalable, MKT Fixed# QA would lose guaranteed resources, violating requirements.
* D. Not possible# Incorrect; VMware supports this configuration.
References:
VMware vSphere 9.0 -Resource Pool Allocation (Fixed vs. Scalable)
VMware Docs: Using Resource Pools
質問 # 39
An administrator is tasked to create a new view in VMware Cloud Foundation (VCF) Operations to monitor CPU demand on ESX hosts, including the historical and forecast data.
Which view type is appropriate to display such information?
- A. Trend
- B. Table
- C. Distribution
- D. Text
正解：A
解説：
InVCF Operations, when monitoring metrics like CPU demand across ESX hosts, includinghistorical usage and forecast data, the best visualization is aTrend view.
* Trend viewsdisplay data over time, showing both past and predicted future behavior.
* This makes them ideal forcapacity planning, performance forecasting, and demand analysis.
* Table (A)# Shows raw values but lacks predictive visualization.
* Distribution (B)# Useful for comparing values across objects but not for time-based or forecasted trends.
* Text (C)# Displays static values or metrics, not historical/forecasting data.
References:
VMware Cloud Foundation 9.0 Operations Guide -Creating Views (Trend, Distribution, Table, Text) VMware Docs: vRealize Operations - Creating Views
質問 # 40
Which action allows a Content Library in VMware vSphere Foundation (VVF) to be accessed by other VMware vCenter Server instances?
- A. Enable automatic synchronization.
- B. Store the library on a shared NFS datastore.
- C. Store the library on a vSAN datastore.
- D. Publish the Content Library.
正解：D
解説：
To allow a Content Library in vSphere Foundation to be accessed byother vCenter Server instances, it must bepublished.
* Once published, other vCenters cansubscribeto the library.
* Synchronization ensures subscribed vCenters receive updated templates and ISOs.
Other options:
* A. Automatic synchronization# Works only for subscribers, not for publishing.
* B. Store on vSAN datastore# Storage choice does not enable multi-vCenter access.
* C. Store on NFS datastore# Similar, datastore type does not matter.
References:
VMware vSphere 9.0 -Content Library Publishing and Subscription
VMware Docs: Publishing and Subscribing Content Libraries
質問 # 41
An administrator has successfully deployed the VMware Cloud Foundation (VCF) Installer appliance to begin a new VMware vSphere Foundation (VVF) deployment. The VMware ESX hosts are powered on and meet all hardware and connectivity prerequisites.
What is the next step to begin deploying vSphere Foundation?
- A. Launch the VCF Installer deployment wizard.
- B. Manually deploy the vCenter Server Appliance.
- C. Enable SSH on all ESX hosts.
- D. Install SDDC Manager using the VCF Installer.
正解：A
解説：
After successfully deploying theVCF Installer appliance, and ensuring ESXi hosts are powered on and meet prerequisites, thenext stepis to:
* Launch the VCF Installer deployment wizard, which guides administrators through host onboarding, vCenter deployment, and cluster setup forvSphere Foundation.
Other options:
* A. Enable SSH on all ESX hosts# Not required unless troubleshooting.
* C. Install SDDC Manager using VCF Installer# Only applies to full Cloud Foundation, not vSphere Foundation deployment.
* D. Manually deploy vCenter Server Appliance# The Installer wizard automates this.
References:
VMware Cloud Foundation 9.0 -Using VCF Installer for vSphere Foundation VMware Docs: VCF Installer Deployment Workflow
質問 # 42
An administrator is informed that a digital certificate used by vSphere has been revoked by the issuing Certificate Authority (CA) before the scheduled expiration date. The administrator checks the Certificate Revocation List (CRL) in VMware Cloud Foundation (VCF) Operations but the CRL tab is not activated.
What must the administrator do to view the CRL?
- A. Select the Activate Standard Certificate Validation under Global Settings.
- B. Set the Threshold For Adapters Certificate Expiration Alert to 6 under Global Settings.
- C. Select the External Event Based Active Symptoms under Global Settings.
- D. The CRL tab is not available when VCF Operations is licensed under vSphere Foundation.
正解：A
解説：
InVCF Operations, theCertificate Revocation List (CRL) tabis visible only whenStandard Certificate Validationis activated in Global Settings.
* Once enabled, administrators can view the CRL tab and monitor revoked certificates.
Other options:
* A. External Event Based Active Symptoms# Related to alerting, not CRL.
* C. Threshold for Expiration Alert# Configures warnings, not CRL visibility.
* D. Not available under vSphere Foundation license# Incorrect; CRL is available if validation is enabled.
References:
VMware Cloud Foundation 9.0 -Certificate Validation Settings in Operations VMware Docs: Managing Certificates in vROps
質問 # 43
An administrator has been tasked with creating a custom alert for an object in VMware Cloud Foundation (VCF) Operations.
When creating the alert, the administrator completes the following:
* A new symptom definition.
* A new alert definition.
* Select the Object type.
What additional step must the administrator take to complete the stated objective and ensure the alert is triggered?
- A. Create a new Payload Template.
- B. Create an instance of the Rest Notification Plugin.
- C. Create and enable a super metric for read latency in the Active Policy.
- D. Enable the alert in an Active Policy.
正解：D
解説：
When creating acustom alert in VCF Operations, the final required step is:
* Enable the alert in an Active Policy, so it applies to the target objects.
Without policy activation, the alert exists but will never trigger.
Other options:
* A. Super metric# Only required if monitoring a custom metric, not for standard alerts.
* B. REST Notification Plugin# Used for outbound integration, not triggering alerts.
* C. Payload Template# Used in notifications, not in core alert configuration.
References:
VMware Cloud Foundation 9.0 -Custom Alerts and Policies
VMware Docs: Alert Definitions in vRealize Operations
質問 # 44
Which component must be added after an initial deployment of VMware vSphere Foundation (VVF) to provide a central location for logs collection?
- A. VCF Operations
- B. VCF Operations for Logs
- C. Fleet Manager
- D. VCF Operations for Networks
正解：B
解説：
After deployingvSphere Foundation, to centralizelog collection and analysis, you must add:
* VCF Operations for Logs, which provides log ingestion, alerting, and centralized troubleshooting.
Other options:
* B. VCF Operations# Focuses on performance/capacity, not log collection.
* C. VCF Operations for Networks# Focuses on networking insights.
* D. Fleet Manager# Used for multi-instance management, not logging.
References:
VMware Cloud Foundation 9.0 -Extending VCF with Logs
VMware Docs: vRealize Log Insight Deployment
質問 # 45
An administrator is tasked with adding a 96-core VMware ESX host to a VMware vSphere Foundation (VVF)
9.0 vCenter cluster. The vCenter has been previously licensed for 1024 cores and the existing hosts equal 960 cores. The administrator adds the host to the vCenter cluster and places the cluster back into production.
What issue will occur if the administrator performs no additional actions to this vCenter?
- A. No issue will occur. The new host was added to the vCenter cluster successfully and will operate for the valid period of the applied license.
- B. The new ESX host will operate in evaluation mode until more capacity is added to the license to license the host. If the host is not licensed when the evaluation period expires, it is disconnected from the vCenter instance.
- C. The new ESX host has been limited to 64 cores until more capacity is added to the license to license the host. Once 32 cores or greater is added to the license, the full 96 cores of the new host will be useable.
- D. The new ESX host will operate in evaluation mode until more capacity is added to the license to license the host. If the host is not licensed when the evaluation period expires, the host will be limited to 64 cores until 32 cores or greater is added to the license.
正解：B
解説：
ThevSphere Foundation 9.0 licensing modelusesper-core licensing.
* Current license covers1024 cores.
* Existing hosts =960 cores, leaving64 cores licensed.
* Adding a96-core host# 32 cores exceed the license.
Result:
* The new host runs inevaluation mode.
* If not licensed after the evaluation period, the host isdisconnected from vCenter.
Other options:
* A. Limited to 64 cores# Not how VMware licensing enforcement works.
* B. Limited to 64 cores until license upgrade# Incorrect; VMware does not partially disable cores.
* D. No issue# Incorrect; licensing compliance will cause issues.
References:
VMware Licensing Guide -Per-Core Licensing Enforcement
VMware Docs: vSphere License Enforcement
質問 # 46
An administrator is tasked to create a new storage policy for an eight-node VMware vSAN Original Storage Architecture (OSA) cluster.
The following specifications have been provided:
* Tolerate up to two host failures.
* Ensure maximum usable capacity.
Which storage policy settings must the administrator configure?
- A. 1 failure - RAID-1
- B. 2 failures - RAID-5
- C. 1 failure - RAID-5
- D. 3 failures - RAID-1
正解：B
解説：
For an8-node vSAN OSA cluster, the administrator needs a storage policy that:
* Tolerates2 host failures, and
* Providesmaximum usable capacity.
* RAID-5/6 (erasure coding)is more capacity-efficient than RAID-1 mirroring.
* To tolerate2 failures, the correct policy isRAID-5 with FTT=2.
* RAID-1 (mirroring) would consume far more capacity, reducing usable space.
Other options:
* A. 1 failure - RAID-1# Only tolerates one failure.
* C. 3 failures - RAID-1# Provides higher resilience but uses much more capacity, not maximum efficiency.
* D. 1 failure - RAID-5# Tolerates only one failure.
References:
VMware vSphere 9.0 -vSAN Storage Policy Rules (FTT & RAID)
VMware Docs: vSAN Erasure Coding (RAID-5/6)
質問 # 47
What is the benefit of enabling lockdown mode on VMware ESX hosts?
- A. Simplifies the management of virtual machines.
- B. Increases CPU and memory resources available to virtual machines (VMs).
- C. Improves network performance.
- D. Restricts direct access to the ESX host, enhancing security.
正解：D
解説：
Lockdown Modeon ESXi hosts is asecurity featurethat restrictsdirect loginto the ESXi host.
* Once enabled, administrators must manage the host throughvCenter Serverinstead of direct DCUI/SSH access (except for exception users).
* This prevents unauthorized local access and improves overall security compliance.
Other options:
* A. Improves network performance# Not related.
* C. Increases CPU/memory for VMs# Not related.
* D. Simplifies VM management# It actually makes direct management more restricted.
References:
VMware vSphere 9.0 -ESXi Lockdown Mode Overview
VMware Docs: Lockdown Mode in ESXi
質問 # 48
An administrator must configure identity access for VMware vSphere Foundation (VVF) to allow admin accounts from the enterprise Active Directory domain corp.local to log in using domain credentials. Security requires authentication to use the default Active Directory protocol, without federation.
Which configuration step is required to enable Active Directory users to authenticate to vCenter?
- A. Configure Identity Federation using SAML with corp.local.
- B. Configure a trusted identity provider using OpenID Connect (OIDC).
- C. Add the domain controller certificate to the Trusted Root store in vCenter.
- D. Add Active Directory over LDAP as an identity source.
正解：D
解説：
To allowActive Directory domain users(corp.local) to authenticate in vCenter with domain credentials:
* The correct method is configuringActive Directory over LDAP as an identity source. (D)
* This uses thedefault AD protocol (LDAP/Kerberos)without requiring SAML or OIDC federation.
Other options:
* A. Adding domain controller certificate# Needed for LDAPS but not the main step.
* B. Identity Federation with SAML# Requires federation, not allowed per requirements.
* C. OpenID Connect (OIDC)# Used for external IdPs, not traditional AD auth.
References:
VMware vSphere 9.0 -Configuring Active Directory Identity Sources
VMware Docs: Add AD over LDAP as Identity Source
質問 # 49
......
2V0-16.25試験問題集パスできる2026年最新の認証された試験問題：https://www.jpntest.com/shiken/2V0-16.25-mondaishu
2V0-16.25試験問題リアルな最新問題PDF：https://drive.google.com/open?id=11WFjlJJsg7n7o0K4fMhmotRocc3yCOU7