リアルなNACE-CIP2-001最新試験JPNTest 2023年最新ののNACE-CIP2-001練習テスト問題集を提供しています
全問NACE-CIP2-001問題集でandCoating Inspector Level 2トレーニングコース受験生を学習してパスさせるCoating Inspector Level 2試験無料問題集！
質問 # 56
The cost of qualified Coating Inspection is normally offset by:
- A. Lower Supervision Costs
- B. Lower Coating Life Cycle Costs
- C. Lower Application Costs
- D. Lower Safety Enforcement Costs
正解：B
質問 # 57
When completing the Final Inspection report the Inspector should write the report using:
- A. Language that only technical experts would understand
- B. Language that only in the project would understand
- C. Language that another NACE Inspector would understand
- D. Language that the most would understand
正解：D
質問 # 58
Galvanizing performs best in which of the following exposures:
- A. pH below 4
- B. pH above 12
- C. pH between 5-10
- D. pH of 13
正解：C
質問 # 59
Antifouling coatings are regulated by international treaties.
- A. False
- B. True
正解：B
質問 # 60
You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor's supervisor. Upon arriving onsite the Contractor's supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.
Your FIRST preferred course of action is to:
- A. Suggest to the Owner that the supervisor should be removed from site
- B. Challenge the supervisor's authority
- C. Express a willingness to work with the site team and follow the specification
- D. Defend the previous inspector
正解：C
質問 # 61
You should bulk store coatings containing isocyanates
- A. wherever it is convenient
- B. in a refrigerated warehouses
- C. in a heated warehouse.
- D. in a well ventilated area separate from the work place.
正解：D
質問 # 62
A single component water borne acrylic coating cures by:
- A. Oxidation
- B. Solvent Evaporation
- C. Coalescence
- D. Co-Reaction
正解：C
質問 # 63
When ASIN D 3363 is specified the Inspector must:
- A. Use the correct solvent
- B. Record the two end points identified in the standard
- C. Record the percentage of failure
- D. Record the highest value attained
正解：B
質問 # 64
Surface preparation of concrete is performed using:
- A. Methods that are completely different to steel
- B. Methods that are exactly the same as steel
- C. Methods that are the same as wood
- D. Methods that have been modified for concrete
正解：D
質問 # 65
You are a NACE Level 2 in-house inspector working in a shop. Your in-house requires you to perform a sleeve test to test for soluble salts; however the 3 rd party NACE Level 3 inspector, the owner, has a san smart meter and has achieved a very different result and has rejected the pre-cleaning.
Your FIRST course of action is to:
- A. Advise the other inspector he is using an incorrect method
- B. Advise your QC Manager to change the ITP to the use of the salt smart meter
- C. Redo the pre-cleaning based on the other inspectors results
- D. Review the specification with the other inspector to see what method was specified
正解：D
質問 # 66
Thermal Spray coatings provide:
- A. Barrier protection
- B. Thermal protection
- C. Sacrificial protection
- D. Inhibitive protection
正解：C
質問 # 67
Which product, when closely inspected has a green or red layer of fusion bonded epoxy (FBE) that is visible directly on the steel?
- A. 3-Layer Polyethylene (PE)
- B. Coal Tar Enamel
- C. Fusion Bonded Epoxy
- D. 2-Layer Polyethylene (PE)
正解：A
質問 # 68
The number of air turns in an enclosure can be affected by all of these EXCEPT
- A. manufacturer of the equipment.
- B. type of dehumidification equipment (refrigerant or desiccant).
- C. coating type.
- D. time of the year (winter/summer).
正解：C
質問 # 69
Non-Conformance Reports are designed to:
- A. Assist the Owner in negotiating credits from the Contractor
- B. Elevate the status of the Inspector
- C. Punish the Contractor for substandard work
- D. To identify items that do not meet the specification requirements
正解：D
質問 # 70
A failure caused by applying a coating too thinly is known as
- A. cracking.
- B. failure to cure.
- C. chalking.
- D. pinholes.
正解：D
質問 # 71
......
有効な学習方法でNACEのNACE-CIP2-001試験をパス：https://www.jpntest.com/shiken/NACE-CIP2-001-mondaishu