更新された2023年12月18日検証済み！NACE-CIP2-001問題集と解答で100%合格できる
2023年最新のの問題NACE-CIP2-001問題集を試そう！更新されたNACE試験合格させます
NACE-CIP2-001認定試験に合格するためには、候補者は少なくとも2年間のコーティング業界での経験を持ち、コーティングインスペクターレベル1試験を成功裏に修了している必要があります。レベル2試験では、表面処理、塗装施工、塗装システム、検査技術、安全性など、幅広いトピックがカバーされます。試験には筆記と実技の両方が含まれており、両方のコンポーネントに合格することが認定を取得するために必要です。
NACE-CIP2-001認定試験は、表面処理、塗装施工、検査技術、および塗料の種類など、コーティング検査に関連する幅広いトピックをカバーしています。この試験は、候補者がこれらのトピックの知識を試験し、またその知識を実際の現場で適用できる能力をテストすることを目的としています。試験は、筆記試験と実技試験の2つに分かれています。
質問 # 55
NACE International Standards are developed by:
- A. Standard committees
- B. Regional mandates
- C. Government mandates
- D. International mandates
正解：A
質問 # 56
Because a NACE Level 2 Inspector has been trained in specific destructive tests, it is up to the Inspector to decide if and when a destructive test is required.
- A. True
- B. False
正解：B
質問 # 57
The standards defining surface cleanliness achieved by centrifugal blast cleaning are:
- A. Comparable to air blast cleaning
- B. Different than air blast cleaning
- C. Slightly different to air blast cleaning
- D. The same as air blast cleaning
正解：D
質問 # 58
The Concrete Repair Institute's comparators can be used to assess:
- A. Compressive and tensile strength prior to coating
- B. Contamination levels prior to coating
- C. Surface profile prior to coating
- D. Surface cleanliness prior to coating
正解：C
質問 # 59
In which type of concrete are laitance commonly encountered?
- A. Gunite
- B. Poured (wet cast)
- C. Concrete block (poured with a form)
- D. Glass fiber cement
正解：B
質問 # 60
Surface preparation of concrete is performed using:
- A. Methods that are exactly the same as steel
- B. Methods that are the same as wood
- C. Methods that are completely different to steel
- D. Methods that have been modified for concrete
正解：D
質問 # 61
When ASIN D 3363 is specified the Inspector must:
- A. Record the percentage of failure
- B. Use the correct solvent
- C. Record the two end points identified in the standard
- D. Record the highest value attained
正解：C
質問 # 62
Coating surveys may include which steps?
Select All That Apply:
- A. Summarize the collected data
- B. Schedule the remedial work
- C. Evaluate the coatings performance
- D. Develop a survey plan
正解：A、B、C、D
質問 # 63
You are NACE Level 2 Inspector working on a tank lining job where a mobile centrifugal blast unit is being used to blast the tank floor to a NACE No.1/SSPC SP 5. The Contractor has completed his final blast and has called for a hold point inspection. This is the 1 st time you have seen field based centrifugal blast cleaning. You observe what appears to be staining on the substrate however the Contractor assures you this is normal when using centrifugal blast units and what you are seeing is what is defined in the standard as an acceptable variation in appearance.
Your FIRST preferred course of action is to:
- A. Call your supervisor
- B. Request that the Contractor re-blast the floor
- C. Shut the job down
- D. Review the standard with the Contractor and re-inspect the floor
正解：D
質問 # 64
When conducting inspections the Inspector should follow which standards:
- A. Australian standards in Australia
- B. The specified standards
- C. NACE and SSPC standards in North America
- D. ISO standards in Europe and Asia
正解：B
質問 # 65
NACE Standards include:
- A. Standard Practices
- B. a) only
- C. Material Requirements
- D. a) & b)
正解：D
質問 # 66
The number of air turns in an enclosure can be affected by all of these EXCEPT
- A. time of the year (winter/summer).
- B. coating type.
- C. type of dehumidification equipment (refrigerant or desiccant).
- D. manufacturer of the equipment.
正解：B
質問 # 67
You can use magnifiers to examine all of the following EXCEPT
- A. Surface profile
- B. Blisters
- C. Surface cleanliness
- D. Mill scale
正解：C
質問 # 68
The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cure of
- A. inorganic zincs.
- B. powder coatings.
- C. epoxies.
- D. urethanes.
正解：A
質問 # 69
The main reason dehumidification is used during coating operations is to
- A. allow the contractor to guarantee the completion date.
- B. avoid repetitive blasting/coating operations.
- C. reduce the possibility of missing the recoat window.
- D. control the environment
正解：D
質問 # 70
A reinforced coating is
- A. more resistant to movement, abrasion, and impact than a non-reinforced coating.
- B. equally resistant to movement and impact as a non-reinforced coating.
- C. less resistant to movement, abrasion, and impact than a non-reinforced coating.
- D. equally resistant to abrasion and impact as a non-reinforced coating.
正解：A
質問 # 71
As a NACE Level 2 Inspector, NACE clearly indicates that you ate qualified to independently produce final documentation for a shop project.
- A. False
- B. True
正解：B
質問 # 72
NACE No.13/ SSPC 6 identifies the use of:
- A. Abrasive blasting only
- B. Steam cleaning only
- C. Watterjetting only
- D. Various methods of cleaning
正解：D
質問 # 73
NACE Level 2 Inspectors have been authorized to perform:
- A. All types of inspection without supervision
- B. Visual inspection, Non-Destructive and Destructive testing
- C. Visual inspection and Non-destructive testing
- D. Visual inspection only
正解：B
質問 # 74
You are a NACE Level 2 Coating Inspector who has just arrived on a job in progress where there is no Inspection and Test Plan (ITP). The first morning you arrive the job is behind schedule and you are asked to take DIY Film Thickness readings.
Your FIRST preferred course of action is to:
- A. Call your supervisor
- B. Develop your own methodology and proceed take the readings
- C. Use a generally accepted industry standard and to take readings
- D. Refuse to take readings until an is in place
正解：C
質問 # 75
Examples of non-ferrous metals include
Select All that Apply:
- A. copper
- B. aluminum
- C. iron
- D. mild steel.
正解：A、B
質問 # 76
When performing inspection in accordance with ASTM D 4138 the Inspector will use:
- A. A set of 14 pencils of varying hardness
- B. A mechanical adhesion tester
- C. A hardness tester
- D. A destructive paint inspection Tooke gauge
正解：D
質問 # 77
You are the NACE Level 2 Coating Inspector where SSPC PA 2 has been specified with an additional requirement that no individual gauge reading shall be below a certain value.
As this is not part of the standard you should:
- A. Call your supervisor
- B. Ignore the additional requirement
- C. Request clarification from the specifier
- D. Enforce the additional requirement
正解：D
質問 # 78
......
最新のNACE-CIP2-001試験問題集でNACEトレーニング試験には：https://www.jpntest.com/shiken/NACE-CIP2-001-mondaishu