更新された2023年11月テストエンジンに練習NSE7_PBC-6.4テスト問題 [Q10-Q27]

更新された2023年11月テストエンジンに練習NSE7_PBC-6.4テスト問題

NSE7_PBC-6.4リアル試験問題テストエンジン問題集トレーニングには30問あります

質問 # 10
Which two statements about Amazon Web Services (AWS) networking are correct? (Choose two.)

A. 802.1q VLAN tags are allowed inside the same virtual private cloud.
B. Proxy ARP entries are disregarded.
C. AWS DNS reserves the first host IP address of each subnet.
D. Multicast traffic is not allowed.

正解：C、D

質問 # 11
You are deploying Amazon Web Services (AWS) GuardDuty to monitor malicious or unauthorized behaviors related to AWS resources. You will also use the Fortinet aws-lambda-guardduty script to translate feeds from AWS GuardDuty findings into a list of malicious IP addresses. FortiGate can then consume this list as an external threat feed.
Which Amazon AWS services must you subscribe to in order to use this feature?

A. Inspector, Shield, GuardDuty, S3, and DynamoDB.
B. GuardDuty, CloudWatch, S3, Inspector, WAF, and Shield.
C. WAF, Shield, GuardDuty, S3, and DynamoDB.
D. GuardDuty, CloudWatch, S3, and DynamoDB.

正解：B

質問 # 12

Refer to the exhibit. Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)

A. SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01
B. 172.29.32.71is set as a next hop IP for all routes under FortigateUDR-01
C. SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT-
0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01
D. The network interface of the active unit moves to itself

正解：B、C

質問 # 13
Which two statements about the Amazon Cloud Services (AWS) network access control lists (ACLs) are true?
(Choose two.)

A. Network ACLs are stateless, and inbound and outbound rules are used for traffic filtering.
B. Network ACLs must be manually applied to virtual network interfaces.
C. Network ACLs support allow rules and deny rules.
D. Network ACLs are stateful, and inbound and outbound rules are used for traffic filtering.

正解：A、C

解説：
Explanation/Reference: https://docs.aws.amazon.com/vpc/latest/userguide/vpc-network-acls.html

質問 # 14
Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)

A. A single VPC deployment with multiple subnets
B. A multiple VPC deployment utilizing a transit gateway
C. A single VPC deployment with multiple subnets and a NAT gateway
D. A multiple VPC deployment utilizing a transit VPC topology

正解：A、D

質問 # 15
An Amazon Web Services (AWS) auto-scale FortiGate cluster has just experienced a scale-down event, terminating a FortiGate in availability zone C.
This has now black-holed the private subnet in this availability zone.
What action will the worker node automatically perform to restore access to the black-holed subnet?

A. The worker node migrates the subnet to a different availability zone.
B. The worker node moves the virtual IP of the terminated FortiGate to a running FortiGate on the worker node's private subnet interface.
C. The worker node modifies the route table applied to the black-holed subnet changing its default route to point to a running FortiGate on the worker node's private subnet interface.
D. The worker node applies a route table from a non-black-holed subnet to the black-holed subnet.

正解：C

解説：
Explanation
Official documentation, failover process on a single AZ,
https://github.com/fortinet/aws-cloudformation-templates/blob/main/FGCP/7.0/SingleAZ/README.md#failove
|| Outbound failover is provided by reassigning the secondary IP addresses of ENI1\port2 from FortiGate 1's private interface to FortiGate 2's private interface. ##Additionally any route targets referencing FortiGate 1's private interface will be updated to reference FortiGate 2's private interface.##
https://github.com/fortinet/aws-cloudformation-templates/tree/master/LambdaAA-RouteFailover/6.0

質問 # 16
Refer to the exhibit.

Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)

A. SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01
B. SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT-
0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01
C. The network interface of the active unit moves to itself
D. 172.29.32.71 is set as a next hop IP for all routes under FortigateUDR-01

正解：B、D

質問 # 17
Refer to the exhibit.

Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)

A. SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01
B. SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT- 0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01
C. The network interface of the active unit moves to itself
D. 172.29.32.71 is set as a next hop IP for all routes under FortigateUDR-01

正解：B、D

質問 # 18
Refer to the exhibit.

You are deploying a FortiGate-VM in Microsoft Azure using the PAYG/On-demand licensing model. After you configure the FortiGate-VM, the validation process fails, displaying the error shown in the exhibit.
What caused the validation process to fail?

A. You selected the Bring Your Own License (BYOL) licensing mode.
B. You selected the incorrect resource group.
C. You selected the PAYG/On-demand licensing model, but did not associate a valid Azure subscription.
D. You selected the PAYG/On-demand licensing model, but did not select correct virtual machine size.

正解：B

質問 # 19
Which two statements about Microsoft Azure network security groups are true? (Choose two.)

A. Network security groups are stateless inbound and outbound rules used for traffic filtering.
B. Network security groups are a stateful inbound and outbound rules used for traffic filtering.
C. Network security groups can be applied to subnets only.
D. Network security groups can be applied to subnets and virtual network interfaces.

正解：B、C

質問 # 20
What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

A. Up to 10 Gbps per attachment
B. Up to 1 Gbps per attachment
C. Up to 1.25 Gbps per attachment
D. Up to 50 Gbps per attachment

正解：C

質問 # 21
Which statement about FortiSandbox in Amazon Web Services (AWS) is true?

A. FortiSandbox in AWS can have a maximum of eight virtual machines (VMs) that inspect files.
B. FortiSandbox in AWS uses Windows virtual machines (VMs) to inspect files.
C. In AWS, virtual machines (VMs) that inspect files are constantly up and running.
D. In AWS, virtual machines (VMs) that inspect files do not have to be reset after inspecting a file.

正解：C

質問 # 22
An organization deployed a FortiGate-VM in the Google Cloud Platform and initially configured it with two vNICs. Now, the same organization wants to add additional vNICs to this existing FortiGate-VM to support different workloads in their environment.
How can they do this?

A. They can create additional vNICs in the UI console.
B. They can use the Compute Engine API Explorer.
C. They can create additional vNICs using the Cloud Shell.
D. They cannot create and add additional vNICs to an existing FortiGate-VM.

正解：B

質問 # 23
An organization deploys a FortiGate-VM (VM04 / c4.xlarge) in Amazon Web Services (AWS) and configures two elastic network interfaces (ENIs). Now, the same organization wants to add additional ENIs to support different workloads in their environment.
Which action can you take to accomplish this?

A. Create the ENI and attach it to FortiGate.
B. None, you cannot create and add additional ENIs to an existing FortiGate-VM.
C. Create the ENI, attach it to FortiGate, and then restart FortiGate.
D. Create the ENI, shut down FortiGate, attach the ENI to FortiGate, and then start FortiGate.

正解：D

質問 # 24
When configuring the FortiCASB policy, which three configuration options are available? (Choose three.)

A. Threat protection policies
B. Data loss prevention policies
C. Intrusion prevention policies
D. Antivirus policies
E. Compliance policies

正解：A、B、E

解説：
Explanation
Policy setting allows you to configure each policy to fit the need of your usage. You can select any type of Policy (Data Analysis, Threat Protection or Compliance)
https://docs.fortinet.com/document/forticasb/20.1.0/online-help/482958/policy-configuration

質問 # 25

Refer to the exhibit. The exhibit shows a topology where multiple connections from clients to the same FortiGate-VM instance, regardless of the protocol being used, are required.
Which two statements are correct? (Choose two.)

A. The Cloud Load Balancer Session Affinity setting should be changed to CLIENT_IP.
B. The design shows an active-active FortiGate-VM architecture.
C. The design shows an active-passive FortiGate-VM architecture.
D. The Cloud Load Balancer Session Affinity setting should use the default value.

正解：A、B

質問 # 26
Refer to the exhibit.

You attempted to deploy the FortiGate-VM in Microsoft Azure with the JSON template, and it failed to boot up. The exhibit shows an excerpt from the JSON template.
What is incorrect with the template?