最新版を今すぐ試そう！[2022年04月] 試験準備には欠かさない！HPE6-A75問題集 [Q14-Q34]

最新版を今すぐ試そう！[2022年04月] 試験準備には欠かさない！HPE6-A75問題集

有能な受験者がシミュレーション済みのHPE6-A75試験PDF問題を試そう

HP HPE6-A75 認定試験の出題範囲：

トピック	出題範囲
トピック 1	シナリオを前提として、セキュリティ構成の変更に基づいて結果を予測します Aruba Mobile FirstArchitectureのコンポーネントを統合します
トピック 2	AirWaveを使用してArubaモビリティマスターとモビリティコントローラーを監視します ArubaOS-Switchのセキュリティ機能と構成の概念を説明します
トピック 3	Aruba WLANの安全な従業員およびゲストソリューションの構成と検証顧客の要件を考慮して、コンポーネントの詳細を決定し、高レベルの設計を文書化します
トピック 4	セキュリティの問題が特定されたシナリオを前提として、修復アクションを決定しますシナリオを前提として、環境のビジネスニーズを技術的な顧客要件に変換します
トピック 5	お客様のシナリオを前提として、特定のテクノロジーまたはソリューションがお客様の要件をどのように満たすかを説明しますリモートアクセスアーキテクチャを説明し、アーキテクチャを統合する方法を説明します
トピック 6	モビリティ統合機能と構成の概念を説明するお客様のシナリオを前提として、BOMに含める必要のある適切なコンポーネントを選択します
トピック 7	シナリオを前提として、お客様の技術要件に基づいて適切な製品を選択し、冗長性の方法を区別し、L2およびL3クラスタリングの利点を説明します

質問 14
Refer to the exhibit.

Controllers are configured m a cluster as shown in the exhibit. These are the network details.
* A Mobility Master (MM) manages the cluster.
* The cluster contains two controllers: C l and C2.
* API and AP2 use CI as their Active AP Anchor Controller (A-AAC). with C2 as their Standby AAC (S-AAC).
* AP3 and AP4 use C2 as their A-AAC, with CI as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A-UAC) assigned is CI. with C2 as the standby. What happens when User I roams the wireless network and eventually their session is handled by AP3?

A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.
C. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
D. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.

正解: B

質問 15
Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

A. The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.
B. Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.
C. Only the attribute values of department and memberOf can be used in role mapping policies.
D. The attribute values of department and memberOf are directly applied as ClearPass roles.
E. Only the attribute value of company can be used in role mapping policies, not the other attributes.

正解: D

質問 16
Refer to the exhibit.

When configuring a Web Login Page in ClearPass Guest, the information shown is displayed. What is the Address field value 'securelogin.arubanetworks.com' used for?

A. for appending to the Web Login URL, before the page name
B. for the client to POST the user credentials to the NAD
C. for ClearPass to send a RADIUS request to the NAD
D. for ClearPass to send a TACACS+ request to the NAD
E. for appending to the Web Login URL, after the page name.

正解: B

質問 17
Refer to the exhibit.

A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What must be changed to meet these requirements?

A. Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.
B. Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.
C. Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.
D. Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.

正解: C

質問 18
Refer to the exhibit.

A. Employee
B. john
C. We can't know this from the screenshot above.
D. mike

正解: C

質問 19
in a VPN that uses certificate-based authentication, which component must be configured on the Mobility Master (MM) to allow a RAP to successfully connect to a Mobility Controller (MC)

A. RAP IPSec pre-shared key
B. RAP VPN username and password
C. WLAN and new RAP group
D. RAP whitelist

正解: D

質問 20
A company requires AOS-Switches at the campus core. The switches:
Will act as the default gateways for several campus VLANs
Must provide redundancy for their services and tolerate the loss of a link or an entire switch Must recover from the failure of one of the switches within a second or less VRRP and MSTP are proposed to meet these requirements. What is an issue with this proposal?

A. VRRP provides redundancy against lost links but not a failed switch.
B. VRRP does not interoperate with MSTP.
C. VRRP provides routing redundancy but not default gateway redundancy.
D. VRRP takes longer than a second to fail over.

正解: D

質問 21
A network administrator wants to use Aruba AirWave to audit an AOS-Switch configuration. What rs one requirement?

A. The switch is authorized in AirWave, which has the correct credentials to log in as a CLI manager.
B. The switch specifies the AirWave IP address for the RADIUS server used for Telnet and SSH authentication.
C. The switch defines the AirWave IP address in its zero touch provisioning (ZTP) profile.
D. The switch is set to Manage Read-Write mode in AirWave but is not set to Monitor Only + Firmware Updates.

正解: B

質問 22
Refer to the exhibit.

Traffic between the servers m Area l takes a less optimal path rather than the link associated with VLAN l OOO, subnet 10.0.0.0/30. Based on the exhibits, why is this the case?

A. OSPF routing switches choose the best intra-area routes based on Area 1 links only.
B. The metric on the VLAN 1000 interface is too low.
C. The link between Switch-1 and Switch-2 has gone down.
D. Switch-1 and Switch-2 cannot achieve adjacency on VLAN 1000 due to mismatches.

正解: A

質問 23
What are Operator Profiles used for?

A. to assign ClearPass roles to guest users
B. to map AD attributes to admin privilege levels in ClearPass Guest
C. to enforce role based access control for ClearPass Policy Manager admin users
D. to enforce role based access control for Aruba Controllers
E. to enforce role based access control for ClearPass Guest Admin users

正解: E

質問 24
What is a primary use case for RPVST+ on AOS-Switches?

A. integration of AOS-Switches in a heterogeneous vendor network that uses the Cisco protocol
B. seamless integration with RSTP
C. more granular load balancing than MSTP when access switches connect to two core switches
D. enhanced loop protection in an MSTP network

正解: A

質問 25
An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.
What must the administrator do to fix this problem?

A. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.
B. Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.
C. Have the MultiZone APs initially boot from the standalone controller in the data zone.
D. Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.

正解: A

質問 26
Refer to the exhibit.

Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?

A. Deny Access
B. Internet VLAN
C. Full Access VLAN
D. Employee VLAN

正解: D

質問 27
An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster.
What must the administrator do to solve this problem?

A. Enable MultiZone booting in the MultiZone AP apboot configuration mode.
B. Enable CPSec in the MultiZone profile for both the primary and data zone.
C. Use different AP Group names for the two zones.
D. Add the MultiZone APs to the data zone's CPSec whitelist.

正解: C

質問 28
Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?

A. show aaa cluster essid
B. show ap active
C. show lc-cluster group-membership
D. show switches

正解: C

質問 29
A university wants to deploy ClearPass with the Guest module. They have two types of users that need to use web login authentication. The first type of users are students whose accounts are in an Active Directory server. The second type of users are friends of students who need to self-register to access the network.
How should the service be setup in the Policy Manager for this Network?

A. Active Directory server as the authentication source, and Guest User Repository as the authorization source
B. Guest User Repository and Active Directory server both as authentication sources
C. Guest User Repository as the authentication source and the Active Directory server as the authorization source
D. Guest User Repository as the authentication source, and Guest User Repository and Active Directory server as authorization sources
E. Either the Guest User Repository or Active Directory server should be the single authentication source

正解: B

質問 30
When is it necessary to use an SNMP based Enforcement profile to send a VIAN?

A. When we have to assign a VLAN to a wired user on a third party wired switch that doesn't support RADIUS authentication.
B. When we have to assign a VIAN to a wired user on an Aruba Mobility Controller.
C. When we have to assign a VLAN to a wired user on an Aruba Mobility Access Switch.
D. When we have to assign a vlan to a wired user on a third party wired switch that doesn't support RADIUS return attributes.
E. When we have to assign a VLAN to a wireless user on an Aruba Mobility Controller.

正解: C

質問 31
Refer to the exhibit.

Based on the Enforcement Policy configuration, when a user with Role Engineer connects to the network and the posture token assigned is Unknown, which Enforcement Profile will be applied?

A. Remote Employee ACL
B. HR VLAN
C. Deny Access Profile
D. EMPLOYEE_VLAN
E. RestrictedACL

正解: C

質問 32
An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator accesses an AP associated with this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command. Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?