[2023年11月18日]HPE6-A75試験問題集でHP練習テスト問題 [Q26-Q41]

[2023年11月18日]HPE6-A75試験問題集でHP練習テスト問題

最新でリアルなHPE6-A75試験問題集解答

質問 # 26
Refer to the exhibit.

An administrator implements AP licensing on a Mobility Master (MM).
* Each campus is responsible to purchase its own AP licenses.
* There are 900 AP licenses deployed in the global pool
* There are three dedicated pools.
* From the global pool, 300 AP licenses are assigned to each dedicated pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses m CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?

A. Add 100 more AP licenses to the global pool.
B. Allow CampusA to share from the CampusC pool.
C. Add 100 more AP licenses and assign them to the CampusA pool.
D. Move 100 licenses from the CampusC pool to the global pool.

正解：C

質問 # 27
Refer to the exhibit.

A. We can't know this from the screenshot above.
B. mike
C. Employee
D. john

正解：A

質問 # 28
Which situation requires an AOS-Switch interface to support MAC-based VLANs?

A. The interface is configured to support Local MAC Authentication (LMA), authenticates endpoints against a non-default MAC group, and limits the address count to 1.
B. The interface is configured to support 802.1X in user-based mode, connects to more than one endpoint at a time, and users are assigned to different dynamic VLANs.
C. The interface has an extended MAC ACL applied to it in the outbound direction, and it uses VLAN ID as one of the criteria for rules.
D. The interface has an extended MAC ACL applied to it in the inbound direction, and it has multiple tagged VLAN assignments.

正解：D

質問 # 29
Refer to the exhibit.

When configuring a Web Login Page in ClearPass Guest, the information shown is displayed.
What is the Address field value 'securelogin.arubanetworks.com' used for?

A. for the client to POST the user credentials to the NAD
B. for appending to the Web Login URL, after the page name.
C. for ClearPass to send a TACACS+ request to the NAD
D. for appending to the Web Login URL, before the page name
E. for ClearPass to send a RADIUS request to the NAD

正解：A

質問 # 30
Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?

A. PAPI
B. IPSec
C. SNMP
D. VRRP

正解：C

質問 # 31
An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.
Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?

A. Persistent
B. Standard
C. Backup
D. Always

正解：A

質問 # 32
Refer to the exhibit.

Switch-1 and Switch-2 connect on interface A23. The switches experience a connectivity issue.
The network administrator sees that both switches show this interface as up. The administrator sees the output shown in the exhibit on Switch-1.
What is a typical issue that could cause this output?

A. an issue with queuing, caused by mismatched QoS settings
B. a hardware issue, such as a broken cable
C. mismatched IP addresses on the VLAN for the link
D. asymmetric routing introduced by a routing configuration error

正解：B

質問 # 33
Refer to the exhibit.

The network administrator wants to reduce failover time If a switch link m VIAN 100 goes down.
What should the administrator do?

A. Lower the dead timer on the BDR of VLAN 100.
B. Configure echo mode BFD on VLAN 100 on all OSPF routing devices on VLAN 100.
C. Lower the hello timer only on the BDR of VLAN 100.
D. Configure graceful restart on all of the OSPF routing devices on VLAN 100.

正解：B

質問 # 34
Refer to the exhibit.

Switch-1 and Switch-2 connect on interface A23. The switches experience a connectivity issue. The network administrator sees that both switches show this interface as up. The administrator sees the output shown in the exhibit on Switch-1.
What is a typical issue that could cause this output?

A. an issue with queuing, caused by mismatched QoS settings
B. a hardware issue, such as a broken cable
C. mismatched IP addresses on the VLAN for the link
D. asymmetric routing introduced by a routing configuration error

正解：B

質問 # 35
A university wants to deploy ClearPass with the Guest module. They have two types of users that need to use web login authentication. The first type of users are students whose accounts are in an Active Directory server. The second type of users are friends of students who need to self-register to access the network.
How should the service be setup in the Policy Manager for this Network?

A. Guest User Repository as the authentication source and the Active Directory server as the authorization source
B. Guest User Repository and Active Directory server both as authentication sources
C. Guest User Repository as the authentication source, and Guest User Repository and Active Directory server as authorization sources
D. Active Directory server as the authentication source, and Guest User Repository as the authorization source
E. Either the Guest User Repository or Active Directory server should be the single authentication source

正解：B

質問 # 36
What are Operator Profiles used for?

A. to enforce role based access control for Aruba Controllers
B. to enforce role based access control for ClearPass Policy Manager admin users
C. to enforce role based access control for ClearPass Guest Admin users
D. to map AD attributes to admin privilege levels in ClearPass Guest
E. to assign ClearPass roles to guest users

正解：C

質問 # 37
A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2.
What is the difference?

A. A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type
1 metric does not permit external route aggregation.
B. A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.
C. A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.
D. A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.

正解：D

解説：
The difference between the two is in the way the cost (metric) of the route is being calculated.
The cost of a type 2 route is always the external cost, irrespective of the interior cost to reach that route. A type 1 cost is the addition of the external cost and the internal cost used to reach that route.

質問 # 38
Refer to the exhibit.

Based on the configuration of me create_user form shown, which statement accurately describes the status?

A. The visitor_phone field will be visible to operators creating the account.
B. The visitor_company field will be visible to operators creating the account.
C. The email field will be visible to guest users when they access the web login page.
D. The visitor_phone field will be visible to the guest users in the web login page.
E. The visitor_company field will be visible to the guest users when they access the web login page.

正解：C

質問 # 39
An administrator needs to authenticate users connected to an ArubaOS Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users' traffic. Which connection method should the administrator configure on the ArubaOS-Switch?

A. Per-user tunneled node
B. VLAN tunneled mode
C. Split-tunneled mode
D. Per-port tunneled node

正解：D

質問 # 40
Refer to the exhibit.

An employee connects a corporate laptop to the network and authenticates for the first time using EAP-TLS. Based on the Enforcement Policy configuration shown, which Enforcement Profile wilt be sent?