最適な1z0-996-22試験準備問題集でOracle 1z0-996-22問題集PDFを試そう！[2024]
Oracle 1z0-996-22試験受験生を確実にパスさせる1z0-996-22学習問題集
質問 # 30
There has been a meter exchange at a service point in the past year.
How many installation events exist for the service point for the past year?
- A. None
- B. Three
- C. Two
- D. One
- E. Four
正解：C
解説：
Whenever a device is installed or removed at a service point, an installation event is created. Installation events capture the history of the devices that have been installed at a service point and link a specific device configuration to the service point. There are different types of installation events for different types of devices, such as smart meters, manual meters, items, and communication components. In this case, since there has been a meter exchange at a service point in the past year, there must be two installation events: one for the removal of the old meter and one for the installation of the new meter. Both installation events will have the same service point ID, but different device configuration IDs and dates/times. References: About Install Events, Maintaining Install Events
質問 # 31
Throughout its lifecycle, an asset's disposition changes as it is moved between locations and service statuses.
Which are valid asset dispositions?
- A. Receiving; Installed; Storage; Retired
- B. In Receipt; In Field; In Stores; Retired
- C. InReceipt; Installed; In Stores; Retired
- D. Receiving; In Field; Storage; Retired
正解：C
解説：
In Oracle Utilities Customer Cloud Service, the valid asset dispositions reflect the various stages an asset undergoes throughout its lifecycle. The correct answer, "C. In Receipt; Installed; In Stores; Retired", represents these stages. These dispositions indicate the status and location of assets as they move in and out of service or undergo maintenance or repair. For example, 'In Receipt' may indicate an asset newly received and not yet deployed, 'Installed' represents assets actively in use, 'In Stores' for assets held in storage, and 'Retired' for assets that are no longer in service.
References:
Oracle documentation on About Assets: About Assets.
Oracle documentation on Asset Locations: Asset Locations.
質問 # 32
Which describes derived values and their relationship with Final Measurements?
- A. Derived values can have multiple Final Measurements, which represent other values for the same Initial Measurement Date/Time.
- B. Final Measurements can have one derived value, which represents an alternative for the same Final Measurement Date/Time.
- C. Final Measurements can have multiple derived values, which represent other values for the same Final Measurement Date/Time.
- D. Final Measurements can have one derived value, which represents the Initial Measurement for the same Final Measurement Date/Time.
正解：D
質問 # 33
Which configuration steps are required to derive loss-adjusted kWh on a measuring component based on a loss factor value related to a service point?
- A. Configure an SQI and the derivation algorithm, and then associate the algorithm to the Measuring Component Type and SQI to the service point.
- B. Configure a factor and derivation algorithm, and then associate the factor to the Measuring Component Type and the derivation algorithm to the service point.
- C. Configure a Service Point Characteristic Type, factor, derivation algorithm, and Service Quantity Identifier (SQI), and then associate the SQI and derivation algorithm to the Measuring Component Type and the characteristic value to the service point.
- D. Configure a Service Point Characteristic Type and derivation algorithm, and then associate the algorithm to the Measuring Component Type and the characteristic value to the service point.
- E. Configure a factor and derivation algorithm, and then associate both to the Measuring Component Type and service point.
正解：A
質問 # 34
Which relationship must be established with an external system or a service provider before creating bill determinants?
- A. Usage Rule
- B. Usage Factor
- C. Usage Subscription
- D. Usage Transaction
正解：C
質問 # 35
Which three initial measurement data (IMD) exception categories are available when you execute VEE rules?
(Choose three.)
- A. Complete
- B. Terminate
- C. Issue
- D. Information
- E. Low
正解：C、D、E
解説：
Initial measurement data (IMD) exception categories are the groupings of exceptions for an IMD based on their functional similarity1. They provide a way to define VEE exceptions in a distinct enough way to understand the root issue that was generated from the VEE rule. The following are the three IMD exception categories that are available when you execute VEE rules:
Issue: This category indicates that there is a problem with the IMD that needs to be resolved before it can be used for further processing. For example, an IMD might have an issue exception if it has a missing or invalid identifier, a missing or invalid date/time, a missing or invalid UOM, or a missing or invalid status2.
Low: This category indicates that the IMD value is lower than expected based on the previous values or the configured thresholds. For example, an IMD might have a low exception if it has a negative consumption, a zero consumption, a low consumption, or a low demand2.
Information: This category indicates that the IMD value is valid but has some additional information that might be useful for analysis or reporting. For example, an IMD might have an information exception if it has a rollover, a reset, a leap year adjustment, or a daylight saving time adjustment2. References:
1: Understanding Exception Types
2: Configuring Exception Types
質問 # 36
Your client has the following requirements:
Many customers are installing their own solar electrical generationequipment. When these customers generate more electricity than required for their own use, the surplus can he exported back to the power grid.
In order to measure this generation, we have installed special scalar devices. These devices have separate registers to measure the energy generated (export) and the energy received (import) from the National Grid.
Both reads will be stored in kWh, but the import is subtractive and export is consumptive.
What solution should you choose to configure the measuring component types for these specific requirements?
- A. Create two service points: one for subtractive import and the other for consumptive export.
- B. Create one new measuring component type for creating a new measuring component that will be linked to two different scalar devices (one for import and the other for export).
- C. Create two new measuringcomponent types (one for subtractive import and the other for consumptive export) to enable the creation of two measuring components that will be linked to one scalar device.
- D. Create one new measuring component type for creating two measuring components (one for import and the other for export) that will be linked to one scalar device.
正解：C
解説：
According to the Oracle Utilities Customer Cloud Service User Guides, measuring component types define the most important properties of a measuring component, such as what it measures, how regularly it measures it, and whether it should be connected to a physical device1. Measuring component types also specify how the measuring component's final measurements should be stored, and whether they are subtractive or consumptive1. In this case, the client needs to measure both the energy imported and exported by the customers who have solar electrical generation equipment. Therefore, the solution is to create two new measuring component types, one for subtractive import and the other for consumptive export, and link them to the same scalar device that has separate registers for both readings. This way, the measuring components can store the measurements in kWh and apply the appropriate sign to indicate the direction of the energy flow2. References:
Understanding Measuring Component Types
Measuring Components
質問 # 37
Which three statements are true about usage subscriptions? (Choose three.)
- A. A usage subscription can have either parent or child service points.
- B. Usage subscriptions are always related to an account.
- C. A usage subscription can be configured to include only a portion of a service point usage.
- D. A usage subscription can have only one service point.
- E. A usage subscription can have many service points.
正解：A、B、E
質問 # 38
Your customer's initial measurement data (IMD) has been imported and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.
What can you assume that the IMD has passed?
- A. Multiplier Check Validation
- B. Critical Validation
- C. High/Low Check Validation
- D. Critical Validation, High/Low Check Validation, and Sum Check Validation
- E. Sum Check Validation
正解：A
質問 # 39
What correctly describes the possible causes of price proration?
- A. change in Rate Schedule only
- B. changes in Rate Version Calculation Group and Bill Factor only
- C. change in Bill Factor only
- D. changes in Rate Schedule and Bill Factor only
- E. change in Rate Version Calculation Group only
正解：D
質問 # 40
Which two plug-in spots can call the rating functionality using base package-supplied algorithm types?
(Choose two.)
- A. Adjustment Type - Generate
- B. Billable Charge Template
- C. Bill Segment Type - Bill Segment Create
- D. Bill Segment Type - Bill Segment FT Creation
- E. Adjustment Type - Adjustment FT Creation
正解：C、D
解説：
The rating functionality can be called by plug-in spots that are associated with bill segment creation or bill segment financial transaction creation. These plug-in spots allow you to apply custom logic or calculations to the bill segment or the financial transactions that are generated from the bill segment. The base package-supplied algorithm types that can be used for rating are C1-Rate and C1-RateByFormula. These algorithm types can be configured with rate schedules, rate components, and rate formulas to perform various types of rating calculations. References: Oracle Utilities Customer Cloud Service Billing Configuration Guide, Oracle Utilities Customer Cloud Service Billing User Guide, Oracle Utilities Customer Cloud Service Plug-in Spot Configuration Guide
質問 # 41
Which usage rule would be used to retrieve scalar measurements and convert the total from one unitof measure to another?
- A. Get Scalar Details and Apply Formula
- B. Get Scalar Details and Math
- C. A custom set of usage rules must be written.
- D. Get Scalar Details and Axis Conversion
正解：A
解説：
The Get Scalar Details and Apply Formula usage rule is used to retrieve scalar measurements from the measuring components installed at the usage subscription's service points and apply a formula to the total quantity1. This rule can be used to convert the total from one unit of measure to another by using a factor that has a Factor Class of "Number" and a Factor Type of "Conversion"2. For example, this rule can be used to convert the total consumption from cubic feet to therms by applying a factor that multiplies the cubic feet by a conversion rate2. Therefore, the correct answer is B. Get Scalar Details and Apply Formula. References:
Get Scalar Details and Apply Formula
Configuring Usage Calculation Rules
質問 # 42
Which entity defines the type of collection process to start based on ageof debt, amount of debt, and type of customer?
- A. Debt Class
- B. Collection Process Template
- C. Collection Class
- D. Customer Class
- E. Collection Class Control
正解：E
解説：
Collection Class Control is the entity that defines the type of collection process to start based on the age of debt, amount of debt, and type of customer. Collection Class Control is a set of rules that determines which collection class (i.e., the collection process template) to assign to a service agreement based on its debt characteristics and customer class1. Collection Class Control also defines the frequency and timing of the collection process assignment and the criteria for canceling a collection process1. Collection Class Control is associated with a debt class, which is a category of debt that defines how it is calculated, aged, and collected2.
Collection Class Control allows you to create different collection strategies for different types of debt and customers. References: Collection Class Control, Debt Class, Oracle Utilities Customer Cloud Service - Get Started
質問 # 43
When the source of a Financial Transaction is canceled, what does it result in?
- A. The source Financial Transaction is deleted.
- B. No change occurs.
- C. The source Financial Transaction is deleted and a new reversal Financial Transaction is created.
- D. A new reversal Financial Transaction is created.
- E. The source Financial Transaction status is changed to "Canceled".
正解：D
解説：
When the source of a Financial Transaction is canceled, it results in a new reversal Financial Transaction being created. The reversal Financial Transaction has the same amount as the source Financial Transaction, but with the opposite sign. The reversal Financial Transaction also has the same source as the source Financial Transaction, but with a different status. The source Financial Transaction remains in the system, but its status is changed to "Canceled". The reversal Financial Transaction is used to reverse the financial impact of the source Financial Transaction on the account balance and other financial calculations. References: Oracle Utilities Customer Cloud Service Financial Transaction - Main, Oracle Utilities Customer Cloud Service Cancel Reasons, Oracle Utilities Customer Cloud Service Setting Up Payment Cancellation Reasons
質問 # 44
Which two statements about usage subscription types are correct? (Choose two.)
- A. Usage subscription types define the main billing contact.
- B. Usage subscription types define the valid service point types.
- C. Usage subscription types define the time zone.
- D. Usage subscription types define the recipient of the usage.
正解：B、D
解説：
Usage subscription types are used to define the types of usage that can be stored for a service point, such as consumption, demand, or generation. Usage subscription types have the following attributes:
Valid Usage Recipients: A list of usage recipients for which this usage subscription type is applicable. A usage recipient is an entity that receives usage from a service point, such as a customer, a utility, or a third party.
Valid Service Point Types: A list of service point types for which this usage subscription type is applicable. A service point type is a classification of service points based on their characteristics, such as metered, unmetered, or virtual.
Valid Usage Calculation Groups: A list of usage calculation groups for which this usage subscription type is applicable. A usage calculation group is a collection of usage calculation types that define how usage is calculated, such as interval, register, or profile.
Valid Dynamic Option Types: A list of dynamic option types for which this usage subscription type is applicable. A dynamic option type is a type of option that can be used to modify the usage calculation process, such as estimation, editing, or aggregation.
Therefore, usage subscription types define the valid service point types and the recipient of the usage, but not the main billing contact or the time zone. References:
Usage Subscription Types
Understanding Usage Subscription Types
Configuring Usage Subscription Types
質問 # 45
How many bill segment-related financial transactions do Payment Arrangements have?
- A. unlimited
- B. depends on the number of payments that are part of the payment arrangement
- C. one
- D. depends on the number of bills that will contain the customer's payment arrangement details
- E. none
正解：C
解説：
Reference:
20Bill%20Customers/4.2.2.12%20CCB.v2.4.Manage%20Payment%20Arrangement%20Charges.pdf (14)
質問 # 46
Which statement correctly describes the relation between a device and a measuring component?
- A. A device configuration links a device only to interval channels.
- B. A device can have any combination of interval and/or scalar measuring components.
- C. A device should have only one measuring component type.
- D. Two measuring components on the same device should have the same Units of Measure (UOM).
正解：B
質問 # 47
Which statement correctly describes the relation between a device and a measuring component?
- A. A device configuration links a device only to interval channels.
- B. A device can have any combination of interval and/or scalar measuring components.
- C. A device should have only one measuring component type.
- D. Two measuring components on the same device should have the same Units of Measure (UOM).
正解：B
解説：
A device is a physical or logical entity that can measure, control, or monitor something1. A measuring component is a single point for which data will be received and stored in the system2. A device can have one or more measuring components, or none at all2. Measuring components can be classified into two primary classes: scalar and interval2. Scalar measuring components are measured at unpredictable intervals, such as once a month2. Interval measuring components are measured at predictable intervals, such as every 15 minutes, every 30 minutes, every hour, etc2. A device can have any combination of interval and/or scalar measuring components, depending on the device type, device configuration, and measuring component type23. Therefore, the correct answer is D. A device can have any combination of interval and/or scalar measuring components. References:
About Devices
About Measuring Components
Maintaining Measuring Components
質問 # 48
......
完全版1z0-996-22練習テスト問題集で70の別格な問題と解釈、今すぐゲットせよ：https://drive.google.com/open?id=1IUjHojUDX9KojQXABaOVfOkdXfT5HNJP
的確で最適なアンサー模擬試験はここにある：https://www.jpntest.com/shiken/1z0-996-22-mondaishu