検証済みのHPE0-J58問題集と解答で合格保証もしくは全額返金 [2023年03月]
HPE0-J58のPDF問題集で2023年03月17日最近更新された問題
HP HPE0-J58 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
質問 32
Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.
A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer's environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.
What should you add the BOM to meet the customer needs?
- A. one HPR 3PAR StoreServ AC RPS Service Processor
- B. one HPE 25m Mini SAS High Density Active Optical Cable for each HPE 3PAR 8440
- C. one HPE 3PAR StoreServ 8000 Direct Connect Cabling Option for Drive Enclosure for each HPE
3PAR 8440 - D. one HPE SN3000B SAN Switch 12-port Upgrade E-LTU per switch, appropriate number of SFPs and cables
正解: A
質問 33
A customer wants to upgrade an existing HPE 3PAR 7000 running HPE 3PAR OS 3.2.2. The customer agrees to run an assessment.
What are the requirements to gather configuration and capacity data and/or performance statistics?
- A. configured FTP Server
- B. enabled Telenet protocol
- C. configured password-less SSM
- D. enabled rest API interface
正解: D
質問 34
Refer to the exhibit.
A customer requests a quote tor an HPE 3PAR 9450 array. The customer will provision a single CPG using RAID 6 (6+2) arx1 require caqe availability What must De changed in the Bin of Materials shown to meet this requirement?
- A. Remove 2 HPE 3PAR 9000 2-port to GD Ethernet Host Pus Adapters.
- B. Add A HPE 3PAR 9000 24-disk 2U SFF (2 Sin) SAS Delve Enclosures.
- C. Add an additional HPE 3PAR StoreServ File Controller v3 System
- D. Change From Direct Connect to Daisy-chain cabling
正解: A
質問 35
What must be considered Alien defining a data compliance strategy?
- A. Organizations must meet the compliance requirements of each country In which they operate.
- B. Backup data must be stored in multiple offsite locations and these different data centers must be in three geographically distinct regions
- C. GDPR applies to all companies processing personal data for people residing in the EU. but only if that company is physically located or based in the EU.
- D. in the united States, company boards, management personnel, and accounting firms must comply with HIPPA regulations regardless of location and financial records must be maintained for seven years.
正解: C
質問 36
A customer asks you to design a solution to protect their existing ERP solution. The solution must allow them to achieve an RTO of ten minutes and an RPO of zero minutes. The existing ERP solution is running on an HPE 3PAR Ail Flash Array, the customer has a DR facility, hut they do not have any DR storage arrays.
in addition to installing a new array in the DR facility, which data protection should you recommend to achieve the customer goals?
- A. synchronous Remote copy
- B. Asynchronous Remote Copy
- C. Peer Persistence
- D. Periodic Asynchronous Remote Copy
正解: A
質問 37
A customer needs to analyze performance and capacity of their storage environment. Their environment consists of HPE 3PAR, EMC VNX, and Pure Systems.
Which tool should you use to begin your assessment of their environment?
- A. HPE Infosight
- B. SAF Collect
- C. DD Analyzer
- D. NinjaCrawler
正解: B
質問 38
A customer attempts to test HPE 3PAR Peer Persistence automated failover by disconnecting the Quorum Witness (QW) link at the source 3PAR. then disconnecting the Remote Copy <RC) link at the source 3PAR one minute later However, failover does not occur
What should you do differently to test Peer Persistence automated failover?
- A. The RC links should be disconnected from both arrays more than 1 minute apart
- B. The QW and RC links should be disabled at the source array more than 1 minute apart
- C. The QW and RC links should be disabled at the source array within 10 seconds of each other
- D. The RC links should be disconnected from both arrays within 10 seconds or each other.
正解: D
質問 39
A customer is monitoring an existing HPE 3PAR array, which is doing synchronous replication to a remote site. The customer notices that controller utilization regularly exceeds 60% on all nodes. An HPE 3AR OS upgrade to 3.3.1 MU2 is planned in the near future to support compression on the array.
What should you inform the customer before performing the upgrade?
- A. Enabling compression requires a backup and restore of all data
- B. Performance cannot he guaranteed during the upgrade.
- C. Enabling compression requires SED capable SSDs In the array.
- D. Performing the upgrade will need to be done in the offline mode
正解: B
質問 40
A customer requires an all-flash solution that will scale out, with multiple arrays for replication. The customer also needs the solution to provide more data per terabyte of flash storage than competing solutions.
Which HPE program should you leverage in your solution to help meet the customer's requirements?
- A. HPE Nimble Timeless Storage
- B. HPE Store More Guarantee
- C. HPE Get Thin Guarantee
- D. HPE Get 6-Nines Guarantee
正解: A
質問 41
A customer experiences a performance issues and blames the HPE 3PAR array. However, you suspect it is caused by a noisy neighbor situation in the VMware environment. Which approach should you use to find and prove a root cause?
- A. Use HPE SAF Collect to gather data for SAF Analyze
- B. Use the advanced performance reports in SSMC
- C. Use HPE InfoSight Cross Stack Analytics
- D. Use Brocade Network Advisor to gather data for analysis
正解: A
質問 42
A customer has a primary site with an HPE Nimble Storage array and a secondary site with another HPE Nimble Storage array. The customer had a planned power outage at their primary site, and now needs to switch back to the primary array.
Place the steps into the order they must be performed to switch back the primary array.
正解:
解説:
質問 43
A customer needs to replicate the data on their HPE 3PAR arrays between their datacenters. Their datacenters are 250km apart. The link between the sites has an RTO of 100 ms, and they have an RPO of 3 minutes.
Which replication method should you recommend to meet the customer needs?
- A. RCFC is Synchronous mode
- B. RCFC in Asynchronous Periodic Mode
- C. RCIP is Synchronous mode
- D. RCIP in Asynchronous Streaming mode
正解: B
質問 44
Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.
A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer's environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.
What should you add the BOM to meet the customer needs?
- A. one HPR 3PAR StoreServ AC RPS Service Processor
- B. one HPE 25m Mini SAS High Density Active Optical Cable for each HPE 3PAR 8440
- C. one HPE 3PAR StoreServ 8000 Direct Connect Cabling Option for Drive Enclosure for each HPE
3PAR 8440 - D. one HPE SN3000B SAN Switch 12-port Upgrade E-LTU per switch, appropriate number of SFPs and cables
正解: A
質問 45
A global customer needs to establish a connection between two SAN islands that are 100O km apart. Which protocol should be used?
- A. RCIP
- B. FC over CWDM
- C. FCoE
- D. FCIP
正解: B
質問 46
A customer requests a proposal for two HPE 3PAR arrays using asynchronous periodic replication. The customer has two data centers, and the current bandwidth available for replication between the data centers is 200 Mb/s.
The customer is replicating 30TB, and the change rate is 3% in 24 hours. The customer wants to achieve an RPO of 10 minutes.
Which statement about bandwidth and replication is true for the customer requirements?
- A. The bandwidth will have to be increased, and replication must happen every 5 minutes
- B. The bandwidth is sufficient, and replication must happen every 10 minutes
- C. The bandwidth is sufficient, and replication must happen every 5 minutes
- D. The bandwidth will have to be increased, and replication must happen every 10 minutes
正解: A
質問 47
A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover. Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?
- A. Site Recovery Manager
- B. Serviceguard Metrocluster
- C. Cluster Extension (CLX)
- D. Peer Persistence
正解: C
解説:
Explanation/Reference: https://tdhpe.techdata.eu/Documents/TDAS-Integrated%20Systems/Technical%20White%
20Paper_HPE%20ConvergedSystem%20700.pdf?epslanguage=en
質問 48
A customer has two sites. The link between sites is Fibre Channel, and the distance between sites is less than 1km. The link latencies are within HPE recommended tolerances.
The customer asks you to design a Peer Persistent solution using HPE servers running physical Windows
2016 servers and HPE 3PAR storage.
What are characteristics of the Quorum Witness? (Select two.)
- A. A physical implementation of the Peer Persistence Quorum Witness is required on a third site
- B. The Quorum Witness initiates the fail-over, passing control to the standby array
- C. Quorum Witness becomes relevant only during 3PAR Peer Persistence failover
- D. A Peer Persistence Quorum Witness is required for normal HPE 3PAR Peer Persistence operation
- E. A virtual implementation of the Peer Persistence Quorum Witness is required on a third site
正解: D,E
質問 49
A customer uses HPE Nimble storage with replication in a VMware environment. The customer wants to implement the Site Recovery Manager plugin in vCenter server to able to create and test disaster recovery plans
Which software do they need to add to the SRM servers?
- A. HPE infoSight
- B. Nimble SmartReplicate
- C. Nimble Storage Replication Adapter
- D. Nimble Connection Manager
正解: B
質問 50
A customer needs to new storage solution, including replication. The replication solution does not need to provide an RTO or RPO of zero.
The customer suffers from severe VM sprawl and has experienced unidentified storage service-level degradations.
What should you point out during your presentation of the solution?
- A. InfoSight and VM details would help in identifying misbehaving VMs putting a high load on the array
- B. Hardware-assisted parity generation and deduplication mitigate the changing performance requirements
- C. When a storage system is being overloaded, the replication software will automatically move the workload
- D. VMs are always individually visible to the array with automatic enablement of VVOL technology
正解: D
質問 51
Two companies merged . The IT department needs a temporary solution to communicate between the two companies' SAN Infrastructure until they can redesign and merge the two fabrics together.
Both companies have B-Series switches that are capable of using Fibre Channel to Fiber Channel routing.
Which zoning option will meet the customer's needs?
- A. LSAN Zoning
- B. Quality of Service Zoning
- C. Traffic Isolation Zoning
- D. Peer zoning
正解: C
質問 52
You are developing reports for a new proposal. You try to use SAF Analyze to upload the customer data you collected, but you receive an error.
What must you do first to begin the process?
- A. Create a new opportunity.
- B. Create a gatekeeper on the SAF utility server
- C. Create a single .zip file of all data exports
- D. Export me data as xml.
正解: C
質問 53
During an HPE 3PAR Remote Copy solution presentation, the customer expresses concern about usable capacity on the target array. The customer wants to use the target array data for safekeeping and recovery purposes only.
How should you respond to address this concern?
- A. Source and target SSD CPGs are automatically created using the most efficient RAID level
- B. Source CPGs and target CPGs can have different RAID levels for optimum efficiency
- C. The source CPGs can use an RAID levels while the target CPGs use RAID 6 14+2.
- D. Source and target CPGs RAID levels adapt automatically to changing requirements.
正解: C
質問 54
A customer needs to analyze performance and capacity of their storage environment. Their environment consists of HPE 3PAR, EMC VNX, and Pure Systems.
Which tool should you use to begin your assessment of their environment?
- A. HPE Infosight
- B. NinjaCrawler
- C. SAF Collect
- D. DD Analyzer
正解: B
質問 55
......
HPE0-J58試験問題有効なHPE0-J58問題集PDF：https://www.jpntest.com/shiken/HPE0-J58-mondaishu
HPE0-J58練習テスト問題解答には更新された118問があります：https://drive.google.com/open?id=1NSAVOzG0PezG4azzWllhAvcR6UFVo0Hi