有効なCPIMテスト解答APICS CPIM試験PDF問題を試そう
APICS CPIM認定リアル2023年最新の模擬試験合格させます
CPIM認定は、生産管理や在庫管理のスキルと知識を向上させ、組織のサプライチェーンのパフォーマンスを改善するために必要なツールを提供することを目的としています。この認定は世界的に認められており、製造、ロジスティクス、およびサプライチェーン産業の雇用主に高く評価されています。
CPIM認定プログラムは、需要管理、在庫管理、サプライチェーン計画、およびオペレーションの実行と制御などのトピックを含む5つのモジュールをカバーしています。これらのモジュールは、プロフェッショナルが生産および在庫プロセスを効果的に管理し、効率を改善し、コストを削減するために必要なスキルと知識を提供するように設計されています。認定プログラムは、生産および在庫プロセスの計画、スケジュール管理、および制御を担当するプロフェッショナル、およびサプライチェーンオペレーションを管理する責任があるプロフェッショナルに最適です。
質問 # 241
XYZ Company is pursuing improved quality levels. Which of the following actions would produce the best results for XYZ?
- A. reduce process variability
- B. adopt a quality first slogan
- C. Hire additional inspectors
- D. tighten tolerances
正解：A
質問 # 242
The material planner works with the type of orders
- A. Three
- B. Two
- C. Seven
- D. Four
正解：A
質問 # 243
What means doing it right the first time and, if something does go wrong, stopping the process and fixing it?
- A. Process balancing
- B. Quality assurance
- C. All of the above
- D. Quality at the source
正解：D
質問 # 244
"The function of establishing, measuring, monitoring and adjusting limits or levels of capacity in order to execute all manufacturing schedules". This definition is related to:
- A. Capacity planning
- B. Capacity control
- C. None of these
- D. Capacity management
正解：D
質問 # 245
A schedule (priority plan) that establishes to show the components required at each level of the assembly and based on lead time, calculates the time when these component will be needed called:
- A. Master Production Schedule
- B. Inventory control Planning
- C. Material Requirements Planning
- D. B & C
正解：C
質問 # 246
A routing file should contain the following information EXCEPT:
- A. Operations to be performed
- B. Work centers to be used
- C. Priority plan
- D. Sequence of operations
正解：C
質問 # 247
To design products for low-cost manufacture requires close coordination between product design and process design, which is called:
- A. Product engineering
- B. Low-cost engineering
- C. Simultaneous engineering
- D. Marketplace engineering
正解：C
質問 # 248
A company wants to produce 10, 000 units of an item over the next three months at a level rate. The first month has 20 working days; the second, 21 working days; and the third, 12 working days because of an annual shutdown. On the average, how much should the company produce each day to level production?
- A. 180.00 units
- B. 188.7 units
- C. 118.8 units
- D. 189.7 units
正解：B
質問 # 249
and products made. depends on the design of the product and the mix of the
- A. Product specification and product quality
- B. Product quality and product line
- C. Product specification and product mix
- D. Product demand and ordered quantity
正解：C
質問 # 250
What will be the impact on inventory turns if average inventory levels are cut in half and all other operating conditions remain the same?
- A. Turns will increase by the square root of 2
- B. Turns will double
- C. Turns will remain constant
- D. Turns will be cut in half
正解：B
質問 # 251
What is concerned with the transfer of ownership and its function is to negotiate, sell, and contract?
- A. Transaction channel
- B. Distribution channel
- C. Contracted channel
- D. Business channel
正解：A
質問 # 252
The total line-haul cost varies with:
- A. weight moved
- B. cost per mile
- C. Only A and B
- D. the distance moved
正解：C
質問 # 253
The systematic use of techniques that identify a required function, establish a value for that function, and finally provide that function at the lowest overall cost, is known as:
- A. Quality analysis
- B. Functional analysis
- C. Specification analysis
- D. Value analysis
正解：D
質問 # 254
Government regulations majorly apply to areas as:
- A. Environment and taxation
- B. Population growth
- C. All of these
- D. Product liability and safety
正解：A、D
質問 # 255
Stockout cost money for which of the following reason?
- A. All of the above
- B. Back-order costs
- C. Lost costs
- D. Lost customers
正解：A
質問 # 256
Which of the following is NOT categorized modeling approaches in SCM?
- A. Supply Chain Network Design Method:
- B. MIP Optimization Modeling:
- C. Heuristic Methods:
- D. None of these
正解：D
質問 # 257
1. Flow of work through the shop is varied and depends on the design of a particular product. As orders are processed, they will take more time at once workstation than at another. Thus, the work flow is not balanced.
2. Machinery and workers must be flexible enough to do the variety of work. Machinery and work centers are usually grouped according to the function they perform (e.g. all lathes in one department).
3. Throughput times are generally long. Scheduling work to arrive just when needed is difficult, the time taken by an order at each work center varies, and work queues before work centers, causing long delays in processing. Work-in-process inventory is often large.
4. The capacity required depends on the particular mix of products being built and is difficult to predict. These are the characteristics of:
- A. All of these
- B. Intermittent manufacturing
- C. Flow manufacturing
- D. Project manufacturing
正解：D
質問 # 258
What is concerned with removing work content, not with spending money on better and faster machines?
- A. Increasing volume
- B. Improving productivity
- C. Continuous project improvement
- D. Continuous process improvement
正解：D
質問 # 259
What is based on a comparative analysis of the introduction and growth of similar products in the hope that the new product behaves in a similar fashion?
- A. Forecasting analogy
- B. Historical analogy
- C. Estimated analogy
- D. Future analogy
正解：B
質問 # 260
What is calculated by taking into account the work center utilization and efficiency?
- A. resource availability
- B. None of the above
- C. Rated capacity
- D. actual rate of production
正解：C
質問 # 261
The quantity on hand plus the quantity ordered must equal the sum of the demand during the lead time plus the demand during the review period plus safety stock.
- A. True
- B. False
正解：A
質問 # 262
A 100% inspection means:
- A. Both of these
- B. Testing every unit in the lot
- C. None of these
- D. Appropriate when the cost of inspection is less than the cost of any loss resulting from failure of the parts
正解：A
質問 # 263
......
APICS CPIM認定を取得することは、個人が自分の職業に取り組み、業界のトレンドやベストプラクティスに常に最新情報を取り入れる意欲を示すことを示し、雇用市場での競争力を高め、キャリアアップの機会を開くことを示します。
CPIM試験問題と有効なCPIM問題集PDF：https://www.jpntest.com/shiken/CPIM-mondaishu