検証済みのHPE0-S59試験問題集PDF [2025年最新] 成功の秘訣はここにある
ベストを体験せよ！HPE0-S59試験問題トレーニングを提供していますJPNTest
質問 # 28
Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer's requirements?
- A. HPE Synergy 480 Gen10 Plus
- B. HPE Superdome Flex 280
- C. HPE ProLiant DL560 Gen10
- D. HPE ProLiant DL380 Gen 10 Plus
正解：D
質問 # 29
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
正解：
解説：
Explanation:
To prevent a timeout and loss of communication during an external switch firmware upgrade, the customer should configure theLACP failover triggerwithin the uplink set. By setting the LACP failover trigger to "All active uplinks transition to offline," the configuration ensures that the traffic will be redirected to available uplinks in the event of an uplink failure or during the upgrade process, maintaining communication and preventing timeouts.
質問 # 30
Which statement about a new HPE SimpliVity deployment is true?
- A. New HPE SimpliVity deployments are licensed per node not per physical socket
- B. New HPE SimpliVity deployments give customer flexible choice of hypervisor
- C. All new HPE SimpliVity models support deduplication and compression
- D. All new HPE SimpliVity models are based on AMD CPUs
正解：C
質問 # 31
The proposal consists of.
- 3 HPE Synergy 12000 frames
- 6 HPE Composer 2 modules
- 2 HPE Virtual Connect SE 100 GO F32 Module
- 4 HPE Synergy 50 GO interconnect Link Module
Which statements about this proposed design are true? (Select two.)
- A. The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules
- B. FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added
- C. The selected interconnect modules do not provide the requested WWN virtualization
- D. Remove 4 HPE Composer 2 modules from the design, as they are not required
- E. HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100 GO F32 modules
正解：B、D
解説：
* D. FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added:To enable Fibre Channel functionality on the HPE Virtual Connect SE 100Gb F32 Modules, it is necessary to add FC upgrade licenses. These licenses unlock the FC capabilities required for the proposed setup.
* E. Remove 4 HPE Composer 2 modules from the design, as they are not required:The proposed design includes 6 HPE Composer 2 modules, but typically, only a pair of HPE Composer 2 modules is required to manage up to 21 frames. Therefore, the remaining 4 Composer 2 modules are not necessary and can be removed from the design.
質問 # 32
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
- B. At HPE OneView Interface to verify whether the iLO processor is disabled
- C. At the iLO interface to verify whether the ILO Advanced license is properly applied
- D. At HPE OneView Interface to verify whether the server is In the maintenance mode
正解：A
解説：
When the iLO interface prompts for a login instead of automatically logging in via HPE OneView, a common issue is that the Single Sign-On (SSO) certificate might have been removed or is not properly configured on the iLO. Verifying the presence and validity of the SSO certificate on the iLO interface is a critical step in troubleshooting this issue.
質問 # 33
Your customer manages HPE Synergy using HPE OneView. For one of its projects, the company purchased
50 HPE.
ProLiant DK385 Gen10 Plus v2.They plan to manage the new systems using HPE OneView as well.
What should the customer do to manage rack system using HPE OneView?
- A. add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.
- B. connect the rack system to an IPDU and add the IPDU to the HPE. OneView instance that is used for HPE synergy management.
- C. Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.
- D. Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.
正解：A
解説：
HPE OneView can manage both Synergy and ProLiant systems, allowing for centralized management of all infrastructure components. By adding the HPE ProLiant DL385 Gen10 Plus v2 systems to the existing HPE OneView instance used for Synergy, the customer can streamline management processes and maintain a unified management interface for all systems.
質問 # 34
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?
- A. It is equipped with HPE Persistent memory by default
- B. It can support a single processor only and up to 4 per chassis
- C. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
- D. It is fully managed using HPE OneView including all connections
正解：B
質問 # 35
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Disable deduplication for this volume at the array level
- B. Remove the offline disks using array management tools
- C. Install and configure MPIO on me Windows system
- D. Remove the offline disks using Windows Disk Management
正解：C
解説：
The issue of seeing multiple instances of an FC boot volume in Disk Management, with one online and three offline, is typically caused by the lack of Multi-Path I/O (MPIO) configuration. Installing and configuring MPIO on the Windows system will enable the operating system to recognize multiple paths to the same storage volume and manage them correctly, presenting only one online instance of the volume.
質問 # 36
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?
- A. if both FiexNICs are connected to different networks
- B. If the logical enclosure is built on at least three HPE Synergy frames
- C. if the logical enclosure is configured with redundant master modules
- D. if both FiexNICs are configured with the same speed
正解：D
質問 # 37
Which statement about the HPE D3940 storage module is true?
- A. Only one type of drives (SATA, SAS, SSD) can be installed in each module.
- B. It is configured through CLI available from HPE Synergy console.
- C. SATA drives require redundant IO adapters to be installed in this module.
- D. Up to five modules can be installed in a single frame with Gen10 servers.
正解：C
質問 # 38
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis.
Which components must be included in the proposal to meet the customer's needs?
- A. At least Tour HPE Persistent Memory DIMMs per nPar
- B. Rack Management Controller for nPar management
- C. HPE Superdome Flex Grid licenses enabling connectivity between chassis
- D. One base chassis and three expansion chassis with licenses
正解：B
解説：
To deploy HPE Superdome Flex and configure two nPars, each based on two chassis, you must include the HPE Superdome Flex Grid licenses. These licenses enable connectivity between the chassis, allowing the creation of nPars (nPartitions) that span multiple chassis. This is essential for the system's proper configuration and operation in a multi-chassis nPar setup.
質問 # 39
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
- B. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- C. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- D. This logical JBOD can be presented to the compute nodes in a different frame.
正解：D
解説：
In HPE Synergy, logical JBODs (Just a Bunch of Disks) can be configured to be accessible by compute nodes across different frames. This flexibility allows for the logical JBOD to be presented to compute nodes that are not in the same frame as the storage module, facilitating better resource utilization and workload management.
質問 # 40
Which statement about HPE OneView milestone releases is true?
- A. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
- B. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
- C. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
- D. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.
正解：D
解説：
A milestone release in HPE OneView refers to a version that includes significant architectural enhancements and updates. It serves as a prerequisite for subsequent updates, ensuring that the system is prepared for the next set of features and improvements. This type of release is essential for maintaining compatibility and stability as new hardware components and features are introduced.
質問 # 41
Match HPE SimpliVity team with the definition.
正解：
解説：
質問 # 42
You discovered that somebody deleted the SSO certificate that affects accessing iLO from HPE OneView from an iLO processor in an HPE Synergy compute node.
How will you recover from this problem?
- A. Login to the HPE Composer CLI and use the efuse procedure for the affected server.
- B. Remove the affected server from HPE OneView and add it again to reconfigure the iLO processor.
- C. Navigate to HPE OneView, locate the affected server hardware and use the Reset iLO option.
- D. Navigate to HPE OneView, locate the affected server hardware and use Refresh option.
正解：D
質問 # 43
Click the area within the iLO management interface that will allow you to access workload Advisor.
正解：
解説：
Explanation:
The Performance section within the iLO management interface provides access to the Workload Advisor.
This feature offers insights and analytics regarding the server's performance, helping to optimize workloads and manage resources efficiently.
質問 # 44
Match HPE SimpliVity team with the definition.
正解：
解説：
Explanation:
Here are the correct matches for each HPE SimpliVity term with their respective definitions:
* ArbiterDefinition:Facilitates communication between nodes and resolves state conflicts to ensure service continuity.
* Compute nodeDefinition:Non-hyperconverged servers that can exist in an HPE SimpliVity environment and provide additional compute capacity while consuming the storage provided by the hyperconverged nodes.
* Intelligent Workload OptimizerDefinition:Integrates with VMware Distributed Resources Scheduler to ensure optimal placement of the VM compute resources.
* Management Virtual ControllerDefinition:Provides centralized management and events end-point for vCenter.
* Arbiter:The Arbiter in an HPE SimpliVity environment is responsible for ensuring communication between nodes and resolving any state conflicts, which is crucial for maintaining service continuity.
* Compute node:In an HPE SimpliVity environment, a compute node refers to non-hyperconverged servers that provide additional compute capacity while utilizing the storage from hyperconverged nodes.
* Intelligent Workload Optimizer:This component integrates with VMware's Distributed Resources Scheduler (DRS) to optimize the placement of virtual machine (VM) compute resources, ensuring they
* are efficiently distributed across the environment.
* Management Virtual Controller:This controller provides centralized management and serves as the events end-point for vCenter, allowing for streamlined management and monitoring of the SimpliVity environment.
質問 # 45
Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32 Module for HPE Synergy. They have recently purchased HPE VC FC modules.
What must you be aware of regarding utilization sampling for the new modules?
- A. For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied
- B. Utilization sampling for HPE VC FC modules must be enabled manually using CLI.
- C. Utilization sampling works the same way tor any type of HPE Synergy interconnect modules
- D. For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled
正解：D
解説：
For HPE Virtual Connect Fibre Channel (VC FC) modules, utilization sampling is always enabled by default and cannot be disabled. This feature ensures continuous monitoring of the module's performance and utilization, providing valuable insights for managing the Fibre Channel network.
質問 # 46
Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer's requirements?
- A. HPE Synergy 480 Gen10 Plus
- B. HPE Superdome Flex 280
- C. HPE ProLiant DL560 Gen10
- D. HPE ProLiant DL380 Gen 10 Plus
正解：B
解説：
The HPE Superdome Flex 280 is the appropriate hardware platform for a customer requiring up to 24 TB of physical memory. This system is designed for high scalability and performance, supporting large memory configurations suitable for demanding applications and workloads.
質問 # 47
......
HP HPE0-S59（HPE Compute Solutions）認証試験は、HPEコンピューティングソリューションの設計、実装、および維持の専門家の知識と専門知識をテストするように設計されています。この認定は、HPE製品とソリューションを扱った経験があり、潜在的な雇用主にスキルと知識を紹介したい個人を対象としています。この試験では、HPE Compute Solutionsアーキテクチャ、構成、管理、トラブルシューティングなど、さまざまなトピックをカバーしています。
HP HPE0-S59試験の準備には、HPEはインストラクター主導のトレーニング、オンライントレーニング、自己ペーストレーニングを含むさまざまなトレーニングコースを提供しています。さらに、HPE Learning Centerでは、模擬試験、学習ガイド、その他のリソースを提供して、試験の準備をサポートします。
最新の100%合格保証付きの素晴らしいHPE0-S59試験問題PDF：https://www.jpntest.com/shiken/HPE0-S59-mondaishu
練習サンプルと問題集と秘訣には2025年最新のHPE0-S59有効なテスト問題集：https://drive.google.com/open?id=1dIAVKOFBi4qVfd1gi_q5rd-oS2BlASs7