JPNTest HPE0-S59リアル試験問題解答は更新された[2024年01月12日]
お手軽に合格させる 最新HP HPE0-S59問題集には60問があります
この試験に備えるためには、HPE Compute Solutionsの実践的な経験が重要です。これは、仕事上の経験、トレーニングコース、または自習によって得ることができます。また、実践問題、学習ガイド、トレーニングビデオなど、オンラインで利用できる多数の学習資料があります。これらの資料を活用することで、試験に完全に準備することができます。
質問 # 28
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Pause flood protection
- B. Port flap protection
- C. Storm control
- D. sFlow
正解：D
質問 # 29
Match HPE SimpliVity team with the definition.
正解：
解説：
質問 # 30
Which statement about the SY480 Gen10 Plus Compute Module is true?
- A. It only supports NVDIMM Persistent Memory.
- B. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
- C. It supports 8 memory channels and memory DIMMs of up to 256GB.
- D. It cannot be mixed with Gen9 compute modules in the same frame.
正解：A
質問 # 31
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?
- A. Only HPE Superdome Flex supports HPE Persistent Memory
- B. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
- C. Only HPE Superdome Flex 280 can support multiple nPars
- D. Only HPE Superdome Rex 280 can be managed using HPE OneView
正解：D
質問 # 32
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For an uplink set, ports from different modules can be selected
- B. An additional license is required to change the enclosure count
- C. Both modules are located in different frames for redundancy
- D. interconnect modules are installed in interconnect bays 1 and 4
正解：B
質問 # 33
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At HPE OneView Interface to verify whether the iLO processor is disabled
- B. At HPE OneView Interface to verify whether the server is In the maintenance mode
- C. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
- D. At the iLO interface to verify whether the ILO Advanced license is properly applied
正解：D
質問 # 34
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- B. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
- C. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- D. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
正解：C
質問 # 35
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
正解：
解説：
質問 # 36
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?
- A. One base chassis and three expansion chassis with licenses
- B. Rack Management Controller for nPar management
- C. HPE Superdome Flex Grid licenses enabling connectivity between chassis
- D. At least Tour HPE Persistent Memory DIMMs per nPar
正解：A
質問 # 37
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.
正解：
解説：
質問 # 38
Match each HPE Synergy logical component with the definition.
正解：
解説：
質問 # 39
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?
- A. If HPE OneView credentials are added in vCenter Server
- B. If the HPE Oneview instance Is integrated with HPE OV4VC.
- C. If vCenter Server is licensed in the HPE Oneview interface
- D. If an compute nodes are added to the vCenter Server
正解：D
質問 # 40
Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?
- A. A management ring can contain mixed frame link module configurations
- B. A management ring with mixed FLM modules cannot have more than 12 frames
- C. Mixing different FLM modules is allowed if all of them have the same firmware version
- D. Existing 2-port FLM modules must be replaced with 4-port FLM modules
正解：B
質問 # 41
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?
- A. Brocade 32GB Fibre Channel Switch Module for HPE Synergy
- B. HPE Virtual Connect SE 100 Gb F32 Module tor Synergy
- C. HPE Synergy 12 Gb SAS Connection Module
- D. HPE virtual Connect SE 32 Gb FC Module for Synergy
正解：B
質問 # 42
Match each HPE OneView network type with its definition.
正解：
解説：
質問 # 43
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?
- A. For VC-FC modules, all of server facing ports must be property licensed.
- B. SAS switches must be moved to second fabric and FC modules Installed in the first one.
- C. For Brocade switches, a logical interconnect group must be created in HPE OneView.
- D. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
正解：B
質問 # 44
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- B. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- C. Enable FC primary and secondary boot on the modules through the HPE OneView interface
- D. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
正解：D
質問 # 45
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?
- A. if both FiexNICs are configured with the same speed
- B. if the logical enclosure is configured with redundant master modules
- C. if both FiexNICs are connected to different networks
- D. If the logical enclosure is built on at least three HPE Synergy frames
正解：A
質問 # 46
Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?
- A. HPE SUM if HPE Persistent Memory firmware must be updated
- B. HPE OneView IT HPE Persistent Memory firmware must be updated.
- C. HPE OneView method for I/O firmware update procedure
- D. RMC CLI to update I/O and HPE Persistent Memory firmware
正解：D
質問 # 47
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Remove the offline disks using Windows Disk Management
- B. Disable deduplication for this volume at the array level
- C. Remove the offline disks using array management tools
- D. Install and configure MPIO on me Windows system
正解：D
質問 # 48
Which compute node parameters are captured within server hardware type?
- A. Number of the CPUs
- B. Size of the memory Installed
- C. Mezzanine card configuration
- D. installed operating system
正解：D
質問 # 49
Which statement about login redistribution is true?
- A. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
- B. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
- C. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
- D. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
正解：D
質問 # 50
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. To use all compute nodes, the customer must create at least two logical enclosures
- B. To manage all frames, the customer must buy two additional HPE Composer 2 modules
- C. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- D. The customer can add one D3940 storage Module to each of the frames
正解：C
質問 # 51
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?
- A. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
- B. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
- C. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.
- D. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
正解：D
質問 # 52
......
HP HPE0-S59（HPE Compute Solutions）認証試験は、HPEコンピューティングソリューションの設計、実装、および維持の専門家の知識と専門知識をテストするように設計されています。この認定は、HPE製品とソリューションを扱った経験があり、潜在的な雇用主にスキルと知識を紹介したい個人を対象としています。この試験では、HPE Compute Solutionsアーキテクチャ、構成、管理、トラブルシューティングなど、さまざまなトピックをカバーしています。
最新のHPE0-S59学習ガイド2024年最新の- 提供するのはテストエンジンとPDF：https://www.jpntest.com/shiken/HPE0-S59-mondaishu
最新版を今すぐ試そうHPE0-S59練習テスト問題解答：https://drive.google.com/open?id=1Yu5GiXCrIXbOUBkGpynaIvVGsXs4uCqA