2023年最新の実際に出ると確認された無料HP HPE0-S59試験問題 [Q13-Q30]

2023年最新の実際に出ると確認された無料HP HPE0-S59試験問題

HPE0-S59リアル試験問題解答は無料

質問 # 13
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?

A. At HPE OneView Interface to verify whether the server is In the maintenance mode
B. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
C. At the iLO interface to verify whether the ILO Advanced license is properly applied
D. At HPE OneView Interface to verify whether the iLO processor is disabled

正解：C

質問 # 14
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?

A. HPE Synergy 12 Gb SAS Connection Module
B. HPE virtual Connect SE 32 Gb FC Module for Synergy
C. HPE Virtual Connect SE 100 Gb F32 Module tor Synergy
D. Brocade 32GB Fibre Channel Switch Module for HPE Synergy

正解：C

質問 # 15
Which compute node parameters are captured within server hardware type?

A. Number of the CPUs
B. Size of the memory Installed
C. Mezzanine card configuration
D. installed operating system

正解：D

質問 # 16
Which statement about the HPE D3940 storage module is true?

A. it is configured through CLl available from HPE Synergy console
B. Up to five modules can be installed in a single frame with Gen10 servers
C. Only one type of drives (SATA, SAS, SSD) can be installed in each module
D. SATA drives requires redundant 10 adapters to be installed in this module

正解：A

質問 # 17
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?

A. For Brocade switches, a logical interconnect group must be created in HPE OneView.
B. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
C. SAS switches must be moved to second fabric and FC modules Installed in the first one.
D. For VC-FC modules, all of server facing ports must be property licensed.

正解：C

質問 # 18
Refer to the exhibit.

Which statement about this logical interconnect group is true?

A. Both modules are located in different frames for redundancy
B. interconnect modules are installed in interconnect bays 1 and 4
C. An additional license is required to change the enclosure count
D. For an uplink set, ports from different modules can be selected

正解：C

質問 # 19
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?

A. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
B. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
C. All logical interconnects configured using this logical interconnect group will be automatically updated
D. All logical interconnects configured using this logical Interconnect group will report inconsistency

正解：A

質問 # 20
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?

A. Load balancing cluster
B. vSphere Standard license
C. Dedicated VMKernel port
D. Virtual Distributed Switch

正解：C

質問 # 21
Which statement about a new HPE SimpliVity deployment is true?

A. New HPE SimpliVity deployments give customer flexible choice of hypervisor
B. New HPE SimpliVity deployments are licensed per node not per physical socket
C. All new HPE SimpliVity models are based on AMD CPUs
D. All new HPE SimpliVity models support deduplication and compression

正解：D

質問 # 22
Click the area within the iLO management interface that will allow you to access workload Advisor.

正解：

解説：

質問 # 23
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?

A. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
B. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.
C. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

正解：C

質問 # 24
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?

A. At least Tour HPE Persistent Memory DIMMs per nPar
B. HPE Superdome Flex Grid licenses enabling connectivity between chassis
C. Rack Management Controller for nPar management
D. One base chassis and three expansion chassis with licenses

正解：D

質問 # 25
Which statement about an HPE Oneview support dump is true?

A. Support dump is a binary file that can be opened only in a dedicated application
B. Appliance support dump by default contains a logical enclosure support dump
C. Support dump can be created if HPE Virtual Connect modules are installed in the frame
D. Preview support dump is available only when creating an appliance support dump

正解：A

質問 # 26
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.

正解：

解説：

質問 # 27
What is a restriction of using a RoCE network?

A. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
B. It is by default configured as an untagged network and cannot be a part of a network set.
C. It does not support Private VLAN and Multicast VLAN.
D. It does not support smart link and private network features.

正解：B

質問 # 28
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?