[2022年03月] 無料CQE試験問題をゲット!CQE実際の無料試験問題 [Q78-Q95]

Share

[2022年03月] 無料CQE試験問題をゲット!CQE実際の無料試験問題

検証済みのCQE問題集と162格別な問題


ASQ CQE 認定試験の出題範囲:

トピック出題範囲
トピック 1
  • QMSに対するトップマネジメントの責任を特定して定義する
  • SPCの目的と利点を特定して説明する
トピック 2
  • チームを開発および編成し、品質イニシアチブを主導するためのさまざまな原則と手法を分析します
  • 倫理的な決定が必要な状況で適切な行動を決定します
トピック 3
  • プロセスと製品の信頼性を維持および改善するために使用されるツールと手法を説明および適用します
  • データを提供する人を含め、QISの基本要素を特定して説明します
トピック 4
  • 離散(属性)データと連続(変数)データを定義、分類、比較する
  • 利害関係者の識別と分析を定義、説明、使用する
トピック 5
  • 相互に関連するプロセスの設計と調整を戦略計画とコアプロセスに分析します
  • 品質哲学と基盤
トピック 6
  • サンプルの完全性を確立および維持するための手法を特定して適用する
  • パフォーマンス測定ツールを定義、説明、および使用する
トピック 7
  • PERTチャート、ガントチャートなどのプロジェクト管理ツールを定義、説明、および使用する
  • 設計レビュープロセスの一般的な要素を特定して適用する
トピック 8
  • ポリシーと目標の確立を含む、QMSに対するトップマネジメントの責任を特定および定義します
  • サプライヤーの評価とパフォーマンス改善の結果を分析します
トピック 9
  • 是正措置を検証する必要性を含む監査報告とフォローアップのステップを適用する
  • 品質改善への障壁を特定し、それらの原因と影響を分析する

 

質問 78
Typically Pareto diagrams are used for which of the following reasons?
I. To display the significant few categories.
II. To compliment attribute data charting.
III. To eliminate insignificant categories.
IV. To focus attention in priority order.

  • A. I and III only
  • B. I, II and III only
  • C. I, II, III and IV
  • D. II, III and IV only

正解: C

 

質問 79
An X-bar and R chart with n=5 has been plotted for some time and has demonstrated random variation.
Upon review of the last 30 plot points, the expected number of runs around the centerline on the X-bar chart is expected to be approximately which of the following?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解: B

 

質問 80
Periodically, a sample of 20 items are randomly selected from a population that is normally distributed, the average is computed, and plotted. Which of the following statements is correct?
. The average of the logarithms of the values is lognormally distributed.
. The standard deviation of the averages is equal to the standard deviation of the individuals divided by the square root of 20.
. The variance of the averages is equal to the variance of the individuals divided by the square root of 20.

  • A. IIonly
  • B. I only
  • C. I andIIIonly
  • D. I andIIonly

正解: A

 

質問 81
Findings and observations are audit terms. The best relationship between these terms is which of the following?

  • A. Observations generally support findings.
  • B. Observations are broader in scope than findings.
  • C. Observations are seen; findings are discovered.
  • D. Findings are reported in writing, observations are reported verbally.

正解: A

 

質問 82
An X-bar and R chart was prepared for an operation using twenty samples with five pieces in each sample; X-bar was found to be 33.6 and R-bar was 6.20. During production, a sample of five was taken and the pieces measured 36, 43, 37, 25, and 38. At the time, this sample was taken:

  • A. Both the average and range were within control limits.
  • B. Only the average was outside control limits.
  • C. Neither the average nor range were within control limits.
  • D. Only the range was outside control limits.

正解: D

 

質問 83
An X-bar chart has shown control for a long time. You see that points for the last 50 samples are all very near the center line on the chart. In fact, they are all within one sigma of the center line. This probably indicates that

  • A. It is a desirable situation.
  • B. The control charts are incorrectly computed.
  • C. The process standard deviation has decreased during the time the last 50 samples were taken.
  • D. It is an undesirable situation.

正解: C

 

質問 84
Which of the following would be the MOST important considerations when establishing inspection points within a production operation?
. Inspection to prevent defects from entering the system.
. Inspection after all operations (both manual and automated).
. Inspection prior to a painting or masking operation.

  • A. I,IIandIII
  • B. I andIIIonly
  • C. I only
  • D. I andIIonly

正解: B

 

質問 85
Which of the following nondestructive testing methods can be used to evaluate sub-surface discontinuities in aluminum bar stock?
I. Microwave.
II. Magnetic particle.
III. Pulse echo.
IV. Eddy current.

  • A. I and III only
  • B. I and IV only
  • C. III and IV only
  • D. I, II and IV only

正解: C

 

質問 86
When asked to make recommendations on how to correct any deficiencies noted in the exit report, the auditor(s) should

  • A. Avoid a recommendation in writing but help the auditee of possible.
  • B. Confer with the client first.
  • C. Make the best recommendation possible.
  • D. Offer no specific advice and few suggestions.

正解: D

 

質問 87
A comprehensive corrective action program is initiated at a large company. Input for CARs are received from customers, internal and external audits, material review reports and other sources. Which two of the following groups would usually administer and control the CAR process?
I. Management review team.
II. Quality department.
III. Corrective Action Board.
IV. Material Review Board.

  • A. I and III only
  • B. III and IV only
  • C. I and II only
  • D. II and III only

正解: A

 

質問 88
A graph of a data set, composed of a series of rectangles, each proportional in width to the range of values in a class and proportional in height to the number of items or fraction of items falling in these classes, is called which of the following?

  • A. Venn diagram.
  • B. Ogive.
  • C. Histogram.
  • D. Raw data.

正解: C

 

質問 89
Analysis of data on all product returns is important because
. Failure rates change with length of product usage.
. Changes in design and in customer use are often well reflected.
. Immediate feedback and analysis of product performance becomes available.

  • A. I,IIandIII
  • B. IIandIIIonly
  • C. I only
  • D. I andIIIonly

正解: A

 

質問 90
What is the standard deviation of the following data?
3.2, 3.1, 3.3, 3.3, 3.1

  • A. 3.2
  • B. 0.0498
  • C. 0.0894
  • D. 0.1

正解: C

 

質問 91
Typically Pareto diagrams are used for which of the following reasons?
. To display the significant few categories. . To compliment attribute data charting. . To eliminate insignificant categories.
. To focus attention in priority order.

  • A. I,IIandIIIonly
  • B. II,IIIandIVonly
  • C. I andIIIonly
  • D. I,II,IIIandIV

正解: D

 

質問 92
The probability of accepting a lot of unacceptable quality is known as

  • A. Alpha risk.
  • B. Producer's risk.
  • C. 1-beta.
  • D. Beta risk.

正解: D

 

質問 93
Consider the following statement:
"A defect which might affect the appearance or general function of essential parts" This definition describes a seriousness classification described as

  • A. Minor.
  • B. Major.
  • C. Critical.
  • D. Incidental.

正解: B

 

質問 94
In most cases, an improvement team facilitator will NOT normally:

  • A. Summarize key ideas generated by the group.
  • B. Function as the group leader.
  • C. Provide feedback to the group.
  • D. Be familiar with problem solving techniques.

正解: B

 

質問 95
......

最新100%合格率保証-素晴らしいCQE試験問題PDF:https://www.jpntest.com/shiken/CQE-mondaishu

CQE問題集には合格保証が付きます合格できるCQE試験:https://drive.google.com/open?id=1A7n_vtLPPSLiRHIrffHdPHSFDHlGpJf5

弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

オンラインサポート時間:( UTC+9 ) 9:00-24:00
月曜日から土曜日まで

サポート:現在連絡